Acme Furniture 97800 User manual

WINE RACK
Width - 18.31"
Depth - 15.87"
Height - 67.87"
DIMENSIONS
MODEL#97800
ASSEMBLY INSTRUCTION FOR ACME FURNITURE
Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which
may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware.
Compare with all parts are present. If any part(s) are missing or damaged, please contact your local furniture dealer.
For efficient and speedy service, please indicate the model number and code letter of part(s) needed.
***Do not fully tighten screws until fully assembled.***

97800
PARTS LIST
X1 Top
A
X1 Left side
B
X1 Right side
C
X1 Bottom
D
X1 Layer
E
X1 Top layer
F
X1 Drawer head
G
X1 Drawer Left
H
X1 Drawer Right
I
X1 Drawer back
J
X1 Drawer bottom
K
X1 Back
L
X4 Connecting iron
O
X2 Layer frame
P
X2 Top frame
M
X2 Bottom frame
N

HARDWARE LIST
Some number parts listed on the instruction sheet may not be in parts bag as they may already be assembled.
Carefully check parts and packing materials prior to ordering replacements.
Attention
X10
2Cam lock 15*12mm
1X10 Cam bolt 7*35*12.5mm
X6
3Dowel 8*30mm
4X4 Wood screw 8#*1-1/4"
X8
12 Bolt 2*1-5/16"
X16
11 Bolt 2*1-1/8"
5X2 Slide rail 17*310mm
6X4 Wood screw #6*1/2"
X2
7Fixing screw M4*12mm
X2
8Wine glass rack
X8
9T-head screw 4*12mm
X16
10 Bolt 2*1/2"
X4
13 Fixative plate
X4
14 Wood screw 3*19mm
X4
15 Adjustable leveler 24mm*1/4*12mm
X1
16 Wall mounted strap 25*152mm
X1
21 Allen wrench
X1
20 Glue
X1
19 Wood screw 8#*1"
X1
18 Wall anchor 1-1/8"
X1
17 Wood screw 4*16mm

ASSEMBLY INSTRUCTIONS
1
Step 1.
1
A
3
B
C
G
HI
D
20
3

2
ASSEMBLY INSTRUCTIONS
Insert in as arrow
direction to specify
Step 2.
C
P
11
C
P
2C
D

Step 3.
3
ASSEMBLY INSTRUCTIONS
B
D
P
P
11
2
B
D

Step 4.
4
ASSEMBLY INSTRUCTIONS
A
L
2
B
C
9
8
F

Step 5.
5
ASSEMBLY INSTRUCTIONS
X2
M
N
O
O
X4
10
12
11
C
A
N

Step 6.
6
ASSEMBLY INSTRUCTIONS
12 11
A
N
B
11
E
M
M

Step 7.
7
ASSEMBLY INSTRUCTIONS
F
M
12
M
15
N
N
Step 8.
2
G
H
I
K
2
J
4H
I

Step 9.
8
ASSEMBLY INSTRUCTIONS
Extend the two outer slides of the runners
so that they could align with the sides of
the drawer. Make sure the pre-drilled
holes from the drawer align with the
screw holes of the outer slides.
Secure two screws from the inside of the
drawer using a Phillips screwdriver to
tighten them to the outer slides.
G
7
13
14
L

Step 10.
9
ASSEMBLY IS COMPLETED.
Make sure the product is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
ASSEMBLY INSTRUCTIONS
For safety,please use the strap
to secure the uniton the wall.
Wall
19
16 18
17