Acnodes PMW7015 User manual

All rights reserved. Product description and product specifications are subject to change without notice.
For latest product information, please visit Acnodes’ website at www.acnodes.com
14628 Central Ave. Chino, CA 91710 Tel: [phone]
Fax: [phone]
© Copyright 2023 Acnodes Corp.
Industrial Monitors
15.6" 4K Open Frame LCD Monitor
Supports 3840 x 2160 Resolution
DP 1.2 + HDMI 1.4 + HDMI 2.0 Input
PMW7015
User Manual

Legal Information
First English printing, July 2022
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Contents
< Part. 1 > PMW7015
1.1 Package Content P.1
1.2 Structure Diagram & Dimension P.2
1.3 Mounting Hardware & Installation P.4
< Part. 2> Specifications / OSD / Remote Controller
2.1 Product Specifications P.5
2.2 On-screen Display Operation ( OSD ) P.7
2.3 Picture In Picture ( PIP ) / Picture By Picture ( PBP ) P.10
< Part. 3> Options
3.1 P.12
3.2 P.13
3.3 P.14
3.4 P.16
3G / HD / SD-SDI Broadcast-grade input
MCS Multi-display control solution
Touchscreen & Driver
DC Power

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip offthe finish.
■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood
based paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
1
2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1
2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
4

15” 4K LCD Display
15” 4K LCD Display X 1
6ft DP cable X 1
Power adapter X 1
Power cord X 1
PMW7015
< Part 1> PMW7015
< 1.1 > Package Content
HDMI 2.0HDMI 1.4 DP Audio
out
Power
Basic I/O
P.1

Model Product Dimension
(W x D x H)
Packing Dimension
(W x D x H) Net Weight Gross Weight
PMW7015 396 x 47.6 x 258.6 mm
15.9 x 1.9 x 10.2 inch
615 x 113 x 523 mm
24.2 x 4.4 x 20.6 inch
3.5 kg
7.7 lb
6.1 kg
13.4 lb
1
2
Rear case
LCD panel
Audio speaker, pair
Universal open frame mounting
LCD membrane
1
2
3
4
5
5
4
3
< 1.2 > Structure Diagram
Front view
Rear view
Side View
Bottom view
P.2

15” 4K LCD Display
Front View Side View
Rear View
PMW7015
UNIT : mm
1mm = 0.03937 inch
Bottom View
< 1.2 > Dimension
P.3

( I) Universal mount
( II ) VESA mount ( 100*100mm )
Hardware and M6*4 pcs for VESA mounting are not provided
< 1.3 > Installation
P.4

15” 4K LCD Display
< Part 2>
< 2.1 > Product Specifications
Mechanical Design
Protection open frame
Front Panel -
Rear Casing Black, RAL 9005
VESA mount 100 x 100 mm
Universal mount ready
Desktop stand -
Panel mount -
LCD Panel
Panel Size ( diagonal ) 15.6-inch Widescreen TFT color LCD
Native Resolution 3840 x 2160@60Hz
Brightness ( typ. ) 300
Contrast Ratio ( typ. ) 800:1
Colors 16.7 M, 8-bit
Viewing Angle ( L/R/U/D ) 89/89/89/89
Response Time ( ms ) 30
Dot pitch ( mm ) 0.0897
Display Area ( mm ) 344.448H x 193.752V
Surface treatment Anti-glare
Surface hardness 3H
Backlight Type LED
MTBF ( hrs ) 20,000
Video
Digital Display port DP 1.2 / HDCP 1.3
HDMI HDMI 2.0 / HDCP 2.2
HDMI 1.4 / HDCP 1.4
Audio
Output
Connector 3.5mm stereo jack
Resistance / Power level 30kΩ/ 2.8V
Speaker:
Dual Stereo 2W x 2
*When the audio output is connected, speaker output is OFF
Power
Input Auto-sensing 100 to 240VAC, 50 / 60Hz
Consumption:
Screen ON Max. 12W
Power saving mode Max. 2W
Power button OFF Max. 1W
Compliance
EMC FCC & CE
Safety CE / LVD & UKCA
Environment RoHS3 & REACH / WEEE
P.5

< 2.1 > Product Specifications
Environmental Conditions
Operating Temperature 0 to 55°C degree
Humidity 10~90%, non-condensing
Altitude 16,000 ft
Storage /
Non-operating Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration ( 11ms duration )
Vibration 10~300Hz 0.5G RMS random vibration
Physical Specification
Product ( W x D x H )
mm 396 x 47.6 x 258.6
inch 15.9 x 1.9 x 10.2
Packing ( W x D x H )
mm 615 x 113 x 523
inch 24.2 x 4.4 x 20.6
Net Weight 3.5 kg / 7.7 lb
Gross Weight 6.1 kg / 13.4 lb
Chassis color Dark
Chassis materials Aluminum
* All dimensions stated are subject to change if options are selected / integrated to base model part codes
Applicable Format
Display port Input PC Signal 3840 x 2160 x 60Hz
2560 x 1440 x 60Hz
1920 x 1080 x 60Hz
1920 x 1200 x 60Hz
1600 x 1200 x 60Hz
1280 x 1024 x 60 / 75Hz
1024 x 768 x 60 / 70 / 75Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
Audio Signal 2ch Linear PCM
HDMI Input HDMI 2.0 / PC signal Same as Display port
HDMI 1.4 3840 x 2160 x 30Hz
2560 x 1440 x 60Hz
1920 x 1080 x 50 / 60Hz ( 1080p )
1920 x 1080 x 25 / 30Hz ( 1080i )
1280 x 720 x 50 / 60Hz ( 720p )
720 x 480 x 50 / 60Hz ( 576p / 480p )
Audio Signal 2ch Linear PCM
P.6

15” 4K LCD Display
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Display the OSD menu
Power on / offLCD
Power light
Green = On
Orange = Power saving
Membrane Switch Function
< 2.2 > On-screen Display Operation ( OSD )
P.7

Eco : Screen in power saving mode
< 2.2 > On-screen Display Operation ( OSD )
1Picture
Brightness : Adjust the screen brightness
Contrast : Adjust the difference between the image background
( black level ) and the foreground ( white level )
Black level : Adjust background black level of the screen
Position
Picture size : Adjust the image size
- Full Screen / 4:3 / 5:4 / Pixel to Pixel
DP version : Select the DP version
2
Color
Color temperature : User / Warm / Cool / 5400k mode and
Red / Green / Blue color balance
Sharpness : Adjust the image from weak to sharp
Hue : Adjust the screen hue value
Saturation : Adjust the saturation of the image color
Dynamic
luminous control : Control the dynamic brightness
3
OSD Set
Language : Select the language in which the OSD menu is
displayed - English
OSD H-Position : Align the screen image left or right
OSD V-Position : Align the screen image up or down
OSD time out : Adjust the screen timeout
OSD transparency : Adjust the screen transparency
OSD size : Adjust the screen size - Normal / Small
OSD rotation : Rotate the screen - 90° / 180° / 270°
4
P.8

15” 4K LCD Display
Reset
Reset : Return the adjustment back to factory setting
< 2.2 > On-screen Display Operation ( OSD )
5
PIP
PIP mode : Enter into PIP / PBP setting - PIP MODE /
PBP 2WIN ( Main screen + 1 sub screen ) /
PBP 3WIN ( Main screen + 2 sub screen ) /
PBP 4WIN ( Main screen + 3 sub screen )
Select the signal input of each sub screen
PIP size : Adjust the size of the Sub screen
- Small / Medium / Large / Huge
PIP position : Adjust the position of the Sub screen
- Top Left / Top Right / Bottom Left / Bottom Right
Swap : Swap the input signal of PIP / PBP sub screen
6
MISC
Signal source : Select the signal source - DP / HDMI1 / HDMI2
Mute : Turn offthe surrounding sound
Audio in : Auto / Line in / DP
Volume : Adjust the volume of sound
Sleep mode : Set the offtime - 10 min / 20 min / 30 min /
50 min / 60 min / 120 min / 240 min
7
Options on Reset page
Rotation : Rotate the image in Full screen or 1:1
- 90° / 180° / 270°
Picture size : Adjust the image size in Full screen or 1:1
P.9

Sub screen
Position
Adjust the position of the Sub screen ( top left, bottom left, top right, bottom right )
OSD Menu →MISC →PIP Position →top left / top right / bottom left / bottom right
top left top right
bottom left bottom right
Size
Adjust the size of the Sub screen ( Large / Small )
OSD Menu →MISC →PIP Mode →Large / Small
LCD Monitor Large Sub screen Small Sub screen
1920 x 1200 552 x 414 480 x 360
1920 x 1080 552 x 414 480 x 360
1440 x 900 414 x 310 360 x 270
1366 x 768 392 x 294 340 x 254
1280 x 1024 368 x 276 320 x 240
Size of Sub screen
< 2.3 > How to Use Picture In Picture ( PIP ) / Picture By Picture ( PBP )
< 2.3.1 > Picture in Picture ( PIP )
Mode
Display the Sub screen in the Main screen.
OSD Menu →MISC →PIP Mode →Large / Small / OFF
Main screen
P.10

15” 4K LCD Display
Sub screen
LCD Monitor Main / Sub screen
1920 x 1200 955 x 716
1920 x 1080 955 x 716
1440 x 900 715 x 536
1366 x 768 678 x 508
1280 x 1024 635 x 476
< 2.3.2 > Picture By Picture ( PBP )
Mode
Display the Sub screen next to the Main screen.
OSD Menu →MISC →PIP Mode →PBP
Main screen
Size
< 2.3.3 > PIP / PBP Source
To select an input signal for PIP / PBP Sub screen.
OSD Menu →MISC →PIP Source →HDMI / SDI
The PIP / PBP is operable in the following table :
Sub
Main HDMI SDI
HDMI xo
SDI ox
P.11

15” 4K LCD Display
< 3.1 > Options : 3G / HD / SD-SDI input
Acnodes’ SDI input is an ideal solution for the broadcast-
grade video and high resolution CCTV market.
Designed for use with LCD displays, a SDI input module can
support up to 1080p @60Hz resolution without using additional
space or power and it comes standard with a 2-year warranty.
INPUT 3G-SDI IN BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT BNC x 1 / Active through, equalized & relocked
Standard Compliance Video SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio SMPTE 299M / 272M-C
Compatible Audio Format 3G-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized / Asyn-
chronized Video
Compatible Video Format 3G-SDI 1080p
1080p
1080i
720p
@60 / 50Hz, 4:2:2
@30 / 25 / 24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60 / 50Hz, 4:4:4
HD-SDI 1080p
1080i
720p
@30 / 25 / 24Hz, 4:2:2
@60 / 50Hz, 4:2:2
@60 / 50Hz, 4:2:2
SD-SDI 480i @60Hz, 4:2:2
ITU-R BT.656 576i @50Hz, 4:2:2
Max. Transmission Distance
75 ohm coaxial cable
3G-SDI 150m at 2.97Gb/s
HD-SDI 250m at 1.485Gb/s
SD-SDI 480m at 270Mb/s
SDI
in - out
HDMI 2.0HDMI 1.4 DP Audio
out
Power
< Part 3> Options
P.12

For the 1st and last display,
push the set switch upward
Set switch
For other daisy chain displays,
push the set switch downward
LINK OUT IN OUT
RS-232C
Cat5 / 6 cable
max. 300 meters
up to 64 displays
Daisy chain up to 1,000
meters and 64 displays
RJ-45 jack
IN OUT IN OUT
Cat5 / 6 cable
max. 300 meters
Cat5 / 6 cable
max. 300 meters
15 feet serial cable
( over 15 feet, extender required )
More control is always good. Especially when it is necessary
and easy. Acnodes provides MCS solution to control the OSD of
various LCD display up to 64 units.
The RS-232C is used for the communication between the PC
and the first display via a 15 feet serial cable while the CAN bus
is used for the various LCD displays cascade together via CAT
5/6 cable, and daisy chain up to 1,000 meters.
Designed for use with LCD displays, Acnodes provides a
MCS input module without using additional space or power and
it comes standard with a 2-year warranty.
< 3.2 > Options : MCS
MCS
( Multi-display Control )
MCS
ou
outinLink set
HDMI 2.0HDMI 1.4 DP Audio
out
Power
P.13

15” 4K LCD Display
< 3.3 > Options : Touchscreen & Driver
15" USB Touchscreen Specification
■Dimension will be changed if Multi-touch required
■USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
■For detailed information, please refer to the attached CD disc
■As the touchscreen unit is not made of toughened glass, please handle it carefully
Model TPC-10 Multi-touch TRB e-Resistive
Technology Projected Capacitive 5-Wire Resistive
Touch Point 10 Single
Input Type Finger or Capacitive Stylus Finger or Stylus
Resolution 4096 x 4096 2048 x 2048
Touch Point Accuracy ± 2 mm -
Response Speed < 5 ms 15 ms
Activation Force < 5 g ≤50 g
Surface Hardness 6H 3H
Light Transmission > 85% 80% ± 3%
Haze 3% ↓8% ± 3%
Durability 50 million touches 10 million touches
Top Layer 3 mm Glass ITO Film
Bottom Layer 0.7 mm Sensor Glass ITO Glass
Thickness 3.9 ± 0.1 mm 2.2 ± 0.2 mm
Connector USB USB Type A
Compatibility Linux / Android / Windows / Mac Windows 7 / XP / Vista, Linux
USB Touchscreen
HDMI 2.0HDMI 1.4 DP Audio
out
Power
P.14

TRB Driver
Please follow the below steps to setup the touch screen:-
Step 1. Run the bundled CD disc
Step 2. Double click the Setup.exe
Step 3. Follow the installation instruction to finishthesetup
Step 4. After installation, run the TouchKit program & the “4 point calibration”
Please do the initial calibration
after the first setup
Connect the USB cable from the USB port on the LCD to a computer. The touch screen supports
easy Plug-and-Play operations. There is no need to install additional drivers on the computer.
< 3.3 > Options : Touchscreen & Driver
TPC-10 Driver
P.15

15” 4K LCD Display
Model 12V 24V 48V 125V
Input rating
Input voltage: 12-Volt 24-Volt 48-Volt 110-Volt
Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V 66 ~ 160V
Input current
- No load 50 mA 50 mA 50 mA 35 mA
- Full load 7183 mA 3551 mA 1755 mA 749 mA
Output rating
Output voltage: 12-Volt 12-Volt 12-Volt 12-Volt
Output current: 6.25A 6.25A 6.25A 6.25A
Efficiency 87% 88% 89% 91%
< 3.4 > Options : DC Power
( 1 ) If the unit with LCD, earthing may be required
For DC power option :
***
P.16