ACP AMD User manual

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Description
Heavy-duty dampers are constructed of extruded aluminum or galvanized steel frame and blades. Dampers can be mounted
horizontally or vertically. For intake or exhaust applications. Tie rod linkage is attached to blades on fan side.
Wiring Diagrams
Dimensions
REAR VIEW CLOSED
3"
¹⁄₂"
A (C+3")
B (C+1")
C
D
(E+3")
E
F
(D / 2)
⁹⁄₃₂" x ¹⁄₂”
Slotted Mounting Holes
Note: Above dimensions + or – normal tolerance of .0625”.
MOTOR
SIDE VIEW
(UP TO 24")
2"
BLADE
CLIP
TIE ROD
LINK
1¹⁄₂"
9"
(Closed)
12" (Open)
SIDE VIEW
(25" TO 72")
2"
BLADE CLIP
BRACE
BAR
TIE ROD
LINK
MOTOR
1¹⁄₂"
10¹⁄₄" (closed)
13¹⁄₄" (open)
S2
S3
S1
NC
NO
0° to 95°
2 HotH L2
1 NeutralN L1
12" to 49" - 100 to 240V, 50/60 Hz
OPERATING INSTRUCTIONS
Motorized daMpers
ModeL aMd/GMd 12" - 72"
50" to 72" - 24 to 240V, 50/60 Hz
NFBUP-S
24 to 240 VAC
Wht
Blk
TF120-S

MOTORIZED DAMPERS
LIMITED WARRANTY
All products manufactured are warranted by Air Conditioning Products Company (ACP) to be free from original defects in workmanship for a period of one year from date of shipment, under conditions of
normal use and service. ACP will replace or repair any defective parts upon return to our plant, freight prepaid. This limited warranty will, in no way, include the payment of labor charges for field replacement
of defective parts, installation, repairs of adjustments, or any other work done. Back charges will not be accepted for any reason unless ACP has given prior written permission, nor will ACP be responsible for
consequential damages of any character, no limited warranty expressed or implied will supersede the foregoing.
Manufactured for Air Conditioning Products Co.
30350 Ecorse Road • Romulus, MI 48174
acpshutters.com
STANDARD MoToR SpecS:
Damper Motor Model Power Supply Motor Temperature
Sizes Manufacturer Number Required Type Range
12" x 12" Belimo TF120-S 100/240 V 2 Position -22 to 122 Deg. F
to 49" x 49" 50/60 Hz Spring Return
50" x 50" Belimo NFBUP(-S) 24/120/240 V 2 Position -22 to 122 Deg. F
to 72" x 72" 50/60 Hz Spring Return
STANDARD SizeS
Overall (A & D) Inside (C & E) Required (B) Est.
Frame Frame Hole Face Free
Part No. Dimension Dimension Opening Area Area
(width X height) (width X height) (width X height) (Sq. Ft.) (Sq. Ft.)
AMD / GMD 12" 15" x 15" 12" x 12" 13" x 13" 1.00 0.84
AMD / GMD 16" 19" x 19" 16" x 16" 17" x 17" 1.78 1.67
AMD / GMD 20" 23" x 23" 20" x 20" 21" x 21" 2.78 2.05
AMD / GMD 24" 27" x 27" 24" x 24" 25" x 25" 4.00 3.59
AMD / GMD 30" 33" x 33" 30" x 30" 31" x 31" 6.25 5.68
AMD / GMD 36" 39" x 39" 36" x 36" 37" x 37" 9.00 8.25
AMD / GMD 42" 45" x 45" 42" x 42" 43" x 43" 12.25 11.31
AMD / GMD 48" 51" x 51" 48" x 48" 49" x 49" 16.00 14.84
AMD / GMD 54" 57" x 57" 54" x 54" 55" x 55" 20.25 18.83
AMD / GMD 60" 63" x 63" 60" x 60" 61" x 61" 25.00 23.31
Note: Dimensions are approximate due to normal tolerances in the manufacturing process.
Estimated Free Area calculation is based upon the following formula: MD[A+B+ (N x C)]/144.
Free Area x FPM = CFM; actual performance may vary.
DMP1272 12/10