Actiforce ATLANTIC FA-SF-FG0002-XXA User manual

English
Deutsch
Nederlands
Français
Español
ATLANTIC
Assembly Manual
Read this manual thoroughly and store in a safe place.
Montageanleitung
Bitte sorgfältig lesen und sicher aufbewahren.
Montagehandleiding
Lees deze handleiding aandachtig door en bewaar deze goed.
Notice de montage
Veuillez lire attentivement cette notice et la conserver en lieu sûr.
Manual de montaje
Lea detenidamente este manual y guárdelo en un sitio seguro.
RNDP21006-IM0001-0EN-DE-NL-FR-ES
Download

2
English
Content
1GENERAL ....................................................................................................................................................................7
1.1 Local value of the assembly/operating manual ...........................................................................................................7
1.2 Intended use ............................................................................................................................................................................7
1.3 Improper use ............................................................................................................................................................................7
1.4 Danger .......................................................................................................................................................................................7
1.5 Content box .............................................................................................................................................................................8
2SAFETY INFORMATION ...............................................................................................................................................9
2.1 Symbols/warnings ...................................................................................................................................................................9
2.2 Symbols used on the workstation frame ..........................................................................................................................9
2.3 Maximum weight allowed on frame .................................................................................................................................9
2.4 Maximum weight allowed per column ........................................................................................................ 10
2.5 Organizational measures ...................................................................................................................................................10
2.6 Informal safety measures ....................................................................................................................................................10
2.7 Note for those assembling the workstation ...................................................................................................................10
2.8 Transport and assembly ......................................................................................................................................................10
2.9 Use of the workstation frame .............................................................................................................................................10
2.10 Specific dangers ...................................................................................................................................................................10
2.11 In an emergency ...................................................................................................................................................................11
2.12 Maintenance and upkeep ................................................................................................................................................11
2.13 Cleaning...................................................................................................................................................................................11
2.14 Persistent risks .........................................................................................................................................................................11
3 ASSEMBLY ..............................................................................................................................................................12
3.1 Detaching Cable Snake from Tabletop..........................................................................................................................12
3.2 Mounting the Leg Unit..........................................................................................................................................................12
3.3 Mounting the Crossbar.........................................................................................................................................................13
3.4 Mounting the Feet .................................................................................................................................................................13
3.5 Connecting the Electrical Components ........................................................................................................................14
3.6 Mounting the Accessories ............................................................................................................................................15-16
3.7 Clearance around the wall or moving parts 25mm of the table top.....................................................................17
3.8 Frame Test without table top..............................................................................................................................................17
4 CORRECT POSITION OF SEAT....................................................................................................................................18
5 TECHNICAL SPECIFICATIONS ..............................................................................................................................19-20
6 OPERATION AND INDICATORS ................................................................................................................................21
6.1 Indicators .................................................................................................................................................................................21
7 TROUBLESHOOTING .................................................................................................................................................21
8 CUSTOMER SERVICE ................................................................................................................................................ 22
9 MANUFACTURER ......................................................................................................................................................22
10 RECYCLING .............................................................................................................................................................. 22
10.1 Taking the workstation out of active duty .....................................................................................................................22
10.2 Taking the workstation apart .............................................................................................................................................22
10.3 Recycling..................................................................................................................................................................................22
10.4 WWEEE - Waste of Electrical and Electronic Equipment............................................................................................22
11 EC-DECLARATION OF CONFORMITY ACCORDING TO MACHINERY DIRECTIVE 2006/42/EC, ANNEX II A .............23

3
Deutsch
Inhaltsverzeichnis
1ALLGEMEINES............................................................................................................................................................24
1.1 Stellenwert der Montage-/Bedienungsanleitung........................................................................................................ 24
1.2 Verwendungszweck............................................................................................................................................................. 24
1.3 Unsachgemäße Verwendung........................................................................................................................................... 24
1.4 Gefahr...................................................................................................................................................................................... 24
1.5 Lieferumfang .......................................................................................................................................................................... 25
2SICHERHEITSHINWEISE...............................................................................................................................................26
2.1 Symbol–und Hinweiserklärungen..................................................................................................................................... 26
2.2 Verwendete Symbole am Tischgestell............................................................................................................................ 26
2.3 Zulässiges Gesamtgewicht auf dem Tischgestell......................................................................................................... 26
2.4 Zulässiges Gesamtgewicht pro Säule.............................................................................................................................. 27
2.5 Organisatorische Maßnahmen......................................................................................................................................... 27
2.6 Empfohlene Sicherheitsmaßnahmen.............................................................................................................................. 27
2.7 Hinweise zur Montage ......................................................................................................................................................... 27
2.8 und Montage......................................................................................................................................................................... 27
2.9 Benutzung des Tischgestells ............................................................................................................................................... 27
2.10 Besondere Gefahrenstellen ............................................................................................................................................... 27
2.11 Hinweise für den Notfall....................................................................................................................................................... 28
2.12 Wartung und Instandhaltung ............................................................................................................................................ 28
2.13 Reinigung................................................................................................................................................................................. 28
2.14 Restrisiken................................................................................................................................................................................. 28
3MONTAGE.................................................................................................................................................................29
3.1 Montage der Leg Unit.......................................................................................................................................................... 29
3.2 Montage der Leg Unit.......................................................................................................................................................... 29
3.3 Montage der Traverse ........................................................................................................................................................ 30
3.4 Montage der Kufen.............................................................................................................................................................. 30
3.5 Anschließen der elektrischen Bauteile........................................................................................................................... 31
3.6 Montage des optionalen Zubehörs ............................................................................................................................32-33
3.7 Sicherheitsabstand zur Wand oder beweglichen Teilen von 25 mm um die Tischplatte ............................... 34
3.8 Test und Inbetriebnahme ohne Tischplatte................................................................................................................... 34
4 ERGONOMISCHE SITZEINSTELLUNG...........................................................................................................................35
5 TECHNISCHE DATEN ............................................................................................................................................ 36-37
6 BETRIEBSHINWEISE .....................................................................................................................................................38
6.1 Fehlfunktionen........................................................................................................................................................................ 38
7 FEHLERBEHEBUNG......................................................................................................................................................38
8 KUNDENDIENST..........................................................................................................................................................39
9 HERSTELLER ................................................................................................................................................................39
10 ENTSORGUNG...........................................................................................................................................................39
10.1 Außerbetriebnahme des Tischgestells ............................................................................................................................ 39
10.2 Tischgestell abbauen und ggf. zerlegen........................................................................................................................ 39
10.3 Entsorgung .............................................................................................................................................................................. 39
10.4 WEEE - Elektro und Elektronikgeräte-Abfall.................................................................................................................... 39
11 EG-KONFORMITÄTSERKLÄRUNG NACH MASCHINENRICHTLINIE 2006/42/EG, ANHANG II A..................................40

4
Nederlands
Inhoudsopgave
1ALGEMEEN ..............................................................................................................................................................41
1.1 Waarde van de montage- en gebruikershandleiding...............................................................................................41
1.2 Beoogd gebruik .....................................................................................................................................................................41
1.3 Onjuist gebruik........................................................................................................................................................................41
1.4 Gevaar......................................................................................................................................................................................41
1.5 Inhoud verpakking ...............................................................................................................................................................42
2VEILIGHEIDSINSTRUCTIES ..........................................................................................................................................43
2.1 Verklaring van symbolen en instructies ...........................................................................................................................43
2.2 Gebruikte symbolen op het frame...................................................................................................................................43
2.3 Maximaal toegestaan gewicht op het frame .............................................................................................................43
2.4 Maximaal toegestaan gewicht per kolom ................................................................................................. 44
2.5 Organisatorische maatregelen .........................................................................................................................................44
2.6 Informele veiligheidsmaatregelen ...................................................................................................................................44
2.7 Vereisten aan de monteurs ................................................................................................................................................44
2.8 Transport en montage..........................................................................................................................................................44
2.9 Gebruik van het frame.........................................................................................................................................................44
2.10 Specifieke gevaren...............................................................................................................................................................44
2.11 Instructies voor noodgevallen............................................................................................................................................45
2.12 Onderhoud en instandhouding ........................................................................................................................................45
2.13 Reiniging...................................................................................................................................................................................45
2.14 Overige risico’s .......................................................................................................................................................................45
3MONTAGE ................................................................................................................................................................46
3.1 Montage van de Leg Unit ..................................................................................................................................................46
3.2 Montage van de Leg Unit ..................................................................................................................................................46
3.3 Montage van de Crossbar .................................................................................................................................................47
3.4 Montage van de voeten.....................................................................................................................................................47
3.5 Aansluiten van de elektrische componenten...............................................................................................................48
3.6 Montage van de optionele accessories...................................................................................................................49-50
3.7 Afstand van 25 mm tussen de muur of andere objecten en het werkblad ................................................ 51
3.8 Frame test zonder werklad..................................................................................................................................................51
4 CORRECTE ZITPOSITIE................................................................................................................................................52
5 TECHNISCHE SPECIFICATIES.................................................................................................................................53-54
6 BEDIENING EN GEBRUIKSAANWIJZINGEN ...............................................................................................................55
6.1 Gebruiksaanwijzingen ..........................................................................................................................................................55
7 PROBLEEMOPLOSSINGEN ........................................................................................................................................55
8 KLANTENSERVICE .....................................................................................................................................................56
9 FABRIKANT ...............................................................................................................................................................56
10 RECYCLING ..............................................................................................................................................................56
10.1 Buitenbedrijfstelling van het frame...................................................................................................................................56
10.2 Demontage van het frame ................................................................................................................................................56
10.3 Recycling..................................................................................................................................................................................56
10.4 AEEA - Afgedankte Elektrische en Elektronische Apparatuur ……………………………………………….…….56
11 EU-VERKLARING VAN OVEREENSTEMMING VOLGENS MACHINERICHTLIJN 2006/42/EG, BIJLAGE II A ..................57

5
Français
Sommaire
1GÉNÉRALITÉS ...........................................................................................................................................................58
1.1 Valeur locale de la notice de montage/d’utilisation ............................................................................................... 58
1.2 Utilisation conforme.............................................................................................................................................................. 58
1.3 Utilisation non conforme .................................................................................................................................................... 58
1.4 Risques...................................................................................................................................................................................... 58
1.5 Contenu de l’emballage ................................................................................................................................................... 59
2CONSIGNES DE SÉCURITÉ ........................................................................................................................................60
2.1 Pictogrammes/avertissements ......................................................................................................................................... 60
2.2 Pictogrammes utilisés sur le bâti de bureau ................................................................................................................. 60
2.3 Poids maximum admissible sur le bâti ........................................................................................................................... 60
2.4 Poids maximum admissible par colonne .....................................................................................................61
2.5 Mesures organisationnelles ............................................................................................................................................... 61
2.6 Mesures de sécurité recommandées ............................................................................................................................ 61
2.7 Remarques à l’intention des personnes chargées du montage ........................................................................... 61
2.8 Transport et montage ......................................................................................................................................................... 61
2.9 Utilisation du bâti de bureau ............................................................................................................................................ 61
2.10 Risques spécifiques ............................................................................................................................................................. 61
2.11 Procédure à suivre en cas d’urgence ........................................................................................................................... 62
2.12 Maintenance et entretien ................................................................................................................................................. 62
2.13 Nettoyage .............................................................................................................................................................................. 62
2.14 Risques persistants ................................................................................................................................................................ 62
3 MONTAGE .............................................................................................................................................................63
3.1 Montage de Leg Unit .......................................................................................................................................................... 63
3.2 Montage de Leg Unit .......................................................................................................................................................... 63
3.3 Montage de traverse .......................................................................................................................................................... 64
3.4 Montage des patins ............................................................................................................................................................ 64
3.5 Raccordement des composants électriques .............................................................................................................. 65
3.6 Montage des accessoires en option .......................................................................................................................66-67
3.7 Espacement de 25 mm du plateau de bureau par rapport au mur ou aux pièces mobiles ...................... 68
3.8 Essai de fonctionnement du bâti sans plateau ......................................................................................................... 68
4 POSITION CORRECTE DU SIÈGE ...............................................................................................................................69
5 CARACTÉRISTIQUES TECHNIQUES ...................................................................................................................... 70-71
6 FONCTIONNEMENT ET INDICATEURS .......................................................................................................................72
6.1 Indicateurs ............................................................................................................................................................................ 72
7 DÉPANNAGE ...........................................................................................................................................................72
8 SERVICE APRÈS-VENTE .............................................................................................................................................73
9 FABRICANT ..............................................................................................................................................................73
10 RECYCLAGE .............................................................................................................................................................73
10.1 Mise hors service du poste de travail ............................................................................................................................ 73
10.2 Démontage du poste de travail .................................................................................................................................... 73
10.3 Recyclage ............................................................................................................................................................................. 73
10.4 DEEE - les déchets d'équipements électriques et électroniques ............................................................................. 73
11 DÉCLARATION DE CONFORMITÉ CE AU SENS DE LA DIRECTIVE MACHINE 2006/42/CE, ANNEXE II A.....................74

6
Español
Contenido
1GENERALIDADES ......................................................................................................................................................75
1.1 Importancia del manual de montaje/funcionamiento.............................................................................................75
1.2 Uso previsto..............................................................................................................................................................................75
1.3 Uso indebido ...........................................................................................................................................................................75
1.4 Peligro........................................................................................................................................................................................75
1.5 Contenido de la caja...........................................................................................................................................................76
2INFORMACIÓN RELATIVA A LA SEGURIDAD ............................................................................................................77
2.1 Símbolos/advertencias ........................................................................................................................................................77
2.2 Símbolos utilizados en el soporte de la estación de trabajo ....................................................................................77
2.3 Peso máximo permitido sobre el soporte ......................................................................................................................77
2.4 Peso máximo permitido por columna .......................................................................................................... 78
2.5 Medidas organizativas .........................................................................................................................................................78
2.6 Medidas de seguridad informativas................................................................................................................................78
2.7 Aviso para los operarios encargados del montaje de la estación de trabajo...................................................78
2.8 Transporte y montaje............................................................................................................................................................78
2.9 Uso del soporte de la estación de trabajo ....................................................................................................................78
2.10 Riesgos específicos................................................................................................................................................................78
2.11 Instrucciones en caso de emergencia ...........................................................................................................................79
2.12 Mantenimiento y reparación .............................................................................................................................................79
2.13 Limpieza....................................................................................................................................................................................79
2.14 Riesgos constantes................................................................................................................................................................79
3 MONTAJE ............................................................................................................................................................... 80
3.1 Montaje de Leg Unit..............................................................................................................................................................80
3.2 Montaje de Leg Unit..............................................................................................................................................................80
3.3 Montaje de la barra transversal .......................................................................................................................................81
3.4 Montaje de los pies...............................................................................................................................................................81
3.5 Conexión de los componentes eléctricos ....................................................................................................................82
3.6 Montaje de los accesorios opcionales ....................................................................................................................83-84
3.7 Distancia de 25 mm entre la pared o partes móviles y el tablero..........................................................................85
3.8 Prueba del soporte sin tablero...........................................................................................................................................85
4 POSICIÓN CORRECTA DEL ASIENTO.........................................................................................................................86
5 ESPECIFICACIONES TÉCNICAS............................................................................................................................87-88
6 FUNCIONAMIENTO E INDICACIONES.......................................................................................................................89
6.1 Indicaciones............................................................................................................................................................................89
7 SOLUCIÓN DE PROBLEMAS.......................................................................................................................................90
8 SERVICIO DE ATENCIÓN AL CLIENTE ........................................................................................................................90
9 FABRICANTE. ............................................................................................................................................................90
10 RECICLAJE ...............................................................................................................................................................90
10.1 Retirar la estación de trabajo del servicio .....................................................................................................................90
10.2 Desmantelamiento de la estación de trabajo.............................................................................................................90
10.3 Reciclaje...................................................................................................................................................................................90
10.4 RAEE - los residuos de aparatos eléctricos y electrónicos........................................................................................ 90
11 DECLARACIÓN DE CONFORMIDAD UE DE ACUERDO CON LA DIRECTIVA DE MÁQUINAS 2006/42/CE,
ANEXO II A .......................................................................................................................................................................91

7
English
1 General
1.1 Local value of the assembly/Operating Manual
The guiding principle for safe use and trouble-free operation of this workstation frame is knowledge of
basic safety information and regulations. This assembly/operating manual contains the most important
information needed for assembling and operating the workstation frame safely. This assembly/
operating manual, in particular the safety information contained herein, must be observed by any
person building the frame and working on the finished surface. More importantly, the rules and regula-
tions applying to accident prevention in the locality in which the workstation frame is to be used must
be observed at all times.
1.2 Intended use
The workstation frame must be used only as a height-adjustable workstation for sitting/standing use in
offices or other enclosed areas. The frame must be used for this purpose only. Any other use than the
above shall be deemed improper. The manufacturer can in no way be held liable for damage arising
from improper use. This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and under-
stand the hazards involved. Children should be supervised to ensure that they do not play with the
appliance, cleaning and user maintenance Intended use shall also include:
 Observation of all information from the assembly/operating manual and
 Prohibition of any sort of addition to/conversion of the workstation.
1.3 Improper use
 Never use the workstation frame to lift people or loads.
 Do not exceed the maximum load of the workstation frame.
 Operate workstation only with power supply unit which is included in delivery.
1.4 Danger
Improper connection of the workstation frame grounding conductor can result in a risk of electric
shock. Check with a qualified electrician if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product.
If the supply cord is damaged, it must be replaced by a special cord or assembly available from the
manufacturer or its service agent.
WARNING: Any changes or modifications not expressly approved by the manufacturer could
void the user’s authority to operate the equipment.

8
English
Assembly requires 2 people!
1.5 Content Box
Items
2x
3
2x
1 1x
2
Hardware Kit Tools
M6x16 M5
20x
A 1x B

9
2 Safety Information
2.1 Symbols/Warnings
The assembly/operating manual uses the following terms and signs to indicate dangers:
This symbol indicates an immediate threatening situation for any person’s life or health.
Failure to adhere to such information may have serious consequences for health, or
could even result in life-threatening injury or death.
This symbol indicates important information. Failure to adhere to such information
could lead to damage to the workstation.

2.2 Symbols used on the workstation frame
Do not place objects or parts of the body under the workstation frame or between
the cross members. This could cause serious injury or even result in death.
2.3 Maximum weight allowed on frame
Do not exceed the maximum permitted load of 100 kg including table top on the
workstation frame. Avoid unbalanced load, distribute the weight evenly, otherwise
overload may occur. Overloading a frame may cause breakage and close by indi-
viduals may suffer serious injuries as a consequence.
English
Example : The entire weight should be
evenly distributed.
> 100 kg
100 kg
13KG

10
2.5 Organizational measures
 The workstation frame can best be assembled by two people. Turning the frame, once the
work surface has been fitted, is a task in particular which requires two people!
2.6 Informal safety measures
 Keep the assembly/operating manual in the place where the workstation frame is used at all
times.
 Make sure that all safety information on the table (see Section Symbols used on the workstation
frame) is legible, replacing the same if necessary.
2.7 Note for those assembling the workstation
 The workstation must be assembled/worked on by persons over the age of 16.
 The persons referred to above must have read and understood the assembly /operating man-
ual.
2.8 Transport and assembly
 The workstation frame must be moved by two persons only, and in such cases must be retract-
ed.
 Do not drag or pull the workstation frame over the floor.
 Assemble the workstation frame with the supplied tools only. They are the only tools which en-
sure that the screws can be tightened to the correct torque.
2.9 Use of the workstation frame
 Do not allow children to use the workstation frame unsupervised. Children may be unaware of
the dangers presented by the workstation frame. They would be in serious danger of injuring
themselves, possibly even with fatal consequences. Further adjustment must then be impossi-
ble as a safeguard against use by children.
 The workstation frame must only be used in appropriate areas.
 Do not use the workstation frame on an uneven surface. In such conditions it will not be steady.
 Never exceed the maximum load on the workstation frame.
2.10 Specific dangers
 When adjusting the height of the frame there is danger of injury. Make sure that there is no-one
else in the immediate surroundings of the frame.
 When assembling the workstation frame, make sure there is ample space to avoid collisions
(i.e. inclination of roof, fixed objects, filing cabinets, waste-paper bins etc.) in all imaginable
directions.
 Make sure there is ample space to avoid collisions if there are objects on the work surface such
as computers or computer peripherals.
 Make sure there is clearance of at least 25 mm from all other furniture, all around the
workstation frame.
English
2.4 Maximum weight allowed per column
Do not exceed the maximum permitted load of 50 kg (including table top) on a col-
umn. Overloading a frame may cause breakage and close by individuals may suffer
serious injuries as a consequence.
50 kg

11
2.11 In an emergency
 Stop using the workstation frame at once if you notice anything unusual (strange sounds etc.).
 Have the workstation frame repaired by specialists. Refrain from using the workstation frame
until it has been successfully repaired.
2.12 Maintenance and upkeep
 The workstation frame and its components are low-maintenance items and need no special
regular maintenance.
 Do not perform any repairs on the work surface or other components yourself.
 Do not alter the construction of the work surface or its frame.
 Any faulty components removed must be replaced with new, original components from the
manufacturer. Use only original replacement parts made by the manufacturer. Have any such
work carried out by a specialist, making reference to this Assembly/operating manual.
2.13 Cleaning
 Always unplug this workstation from the electrical outlet before cleaning.
 Dust the workstation frame once a week with a dry cloth.
 Clean the workstation frame with a damp cloth and a weak solution of cleaner once a fort-
night.
2.14 Persistent risks
This workstation frame has been built to the state of the art and to recognized safety regulations.
Nonetheless, its use may constitute a risk to the health and safety of users or third parties, damage to
the workstation frame or to other items. The workstation frame must be used only:
 for the purpose for which it was intended.
 if it is completely safe to do so.
English

12
English
3 Assembly
Before attempting assembly, read the Safety Information in Section 2.
To protect components and the floor from scratches, it is advisable to use a pad before
assembly. You can, for example, use the supplied cardboard by unfolding it.
3.1 Detaching Cable Snake from Tabletop
CLICK !
1
1
1
2
3.2 Mounting the Leg Unit

13
English
3
3.3 Mounting the Crossbar
A
A
3 3
3.4 Mounting the Feet
4

14
Keep in mind that the desk which you are assembling is height adjustable. The cables
of the electrical components must be able to follow the movement of the desk freely.
3.5 Connecting the Electrical Components English
5

15
3.6 Mounting the Accessories English
6
CLICK!
CLICK!

16
7
English
3.6 Mounting the Accessories
B

17
25mm
(1”) 25mm
(1”)
25mm
(1”)
3.7 Clearance around the wall or moving parts 25mm of the table
Allow a minimum clearance of 25mm (1“) from the edge of a table top to a wall
or moving parts.
English
Please make sure that the workstation frame can move freely and correct at all times.
In case you need to disconnect cables from the electrical components always be su-
re to disconnect power first.
In case the height adjustment is not operating normally, stop using the workstation fra-
me immediately and disconnect the power. Get in contact with customer service for
further advise
3.8 Frame test
Reset Mode
The first time you put in the plug of the power supply into the socket the height adjustment can only
be operated in the reset-mode. As long as the reset-mode is enabled, the system can only move
downward. In order to use the system normally, please follow the next steps:
 Press and hold the down-button, the system slowly moves downward.
 Please move the system to the lowest position. This position will be used as reference-point (zero-
point).
 Keep the button pressed for a moment when the system has reached the lowest position. This
will end the reset-mode.
 The system can be operated normally now. Press and hold the up- or down-button to move the
system to the desired height. The system stops when you release the buttons.
8
DOWN
UP

18
Correct sitting posture
Sitting incorrectly can lead to injuries at joints, bowstrings and muscles. In order to prevent this it is
necessary to adjust your office chair and desk.
Apart from the following advise you should always prevent an uncomfortable sitting posture. If you
feel that the following advices leads you to an uncomfortable sitting posture simply adapt your
needs.
Office Chair
 The sitting height has to be adjusted in way that your knee is angled by 90-120° when your foot
is flat on the ground.
 Sitting properly requires that your lower back touches the back rest. If possible align the seating
depth in order to avoid pressure from the seat pan to your lower leg .
 Sit upright but lean back in a relaxed position. If possible adjust the lumbar support of your chair
to your height. Adjust the back rest in a way that pushes your upper body slightly forward but
still offering enough flexibility to yield movement.
 If possible adjust the height of your armrests. Your shoulders should be in a relaxed position
when your arms are touching the arm rest.
Desk
 Adjust the table height after you have found your correct sitting posture.
 Your elbows should be angled by 90-120° when your arms rest on the table top. The edge of
the top should not press against your arms.
Equipment on the desk
 Incident light (day light or lamps) on your monitor should approach the surface of your screen
by an angle of 90°.
 The height of your monitor should be adjusted in way that enables you to look slightly down-
ward while focusing the center of your screen.
 Please keep a distance of 60-70 cm from your screen.
 A careful posture for your wrists can be achieved by a flat narrowed keyboard.
 Please heed the advice in the manuals of your further (ergonomical) equipment.
4 Correct position of seat English

19
English
5 Technical Specification
Assembly Manual version RNDP21006-IM0001-AEN-DE-NL-FR-ES
Year of Publication 2022
Production country Malaysia
System 1-step
Material Steel, Plastic and Aluminium
Stroke (max.) 490mm (19.3”)
Frame load (max.)
ControlForce 2 Pro 100 kg
Frame weight ± 21.5 kg
Input power
ControlForce 2 Pro 100-127Vac, 60Hz, 5A
220-240Vac,50Hz, 2A
Speed frame load ± 39 mm/s
Duty cycle 10 % (2 Minute on / 18 Minutes off)
Noise level < 50 dB(A)
Environmental temperature Use 15 - 30°C
Environmental temperature Storing 10 - 50°C
Humidity Use <85%
Humidity Storing <50%
Maximum Storing time -
Indoor use only!!!

20
(* General Tolerance = ± 10 mm)
English
Minimum Frame Height 690 mm (27.2“)
Maximum Frame Height 1180 mm (46.5“)
Maximum Stroke 490 mm (19.3“)
Frame Width 990 mm (39“)
Frame Depth 600 mm (23.6“)
Table Top Depth 600 mm (23.6“)
Table Top Thickness 18 mm (0.7“)
Maximum Frame Load 100 kg
490 mm
(19.3”)
690 mm
(27.2”)
1180 mm
(46.5”)
600 mm
(23.6”)
990 mm
(39“)