Actiforce STEELFORCE PRO SLS HAND CRANK Series User manual

English
Deutsch
Nederlands
Assembly Manual
Read this manual thoroughly and store in a safe place.
Montageanleitung
Bitte sorgfältig lesen und sicher aufbewahren.
Montagehandleiding
Lees deze handleiding aandachtig door en bewaar deze goed.
STEELFORCE PRO SLS HAND CRANK
SERIES
370 / 570 (60x90)
SLS-IM0037-1EN-DE-NL

2
English
Content
1 GENERAL ........................................................................................................................................................ 5
1.1 Local value of the assembly/operating manual ................................................................................. 5
1.2 Intended use ........................................................................................................................................ 5
1.3 Improper use ........................................................................................................................................ 5
1.4 Content box ......................................................................................................................................... 6
2 SAFETY INFORMATION .................................................................................................................................... 7
2.1 Symbols/warnings ................................................................................................................................. 7
2.2 Symbols used on the workstation frame .............................................................................................. 7
2.3 Maximum weight allowed on frame ................................................................................................... 7
2.4 Maximum weight allowed per column ................................................................................................ 8
2.5 Organizational measures ..................................................................................................................... 8
2.6 Informal safety measures ..................................................................................................................... 8
2.7 Note for those assembling the workstation ......................................................................................... 8
2.8 Transport and assembly ....................................................................................................................... 8
2.9 Use of the workstation frame ............................................................................................................... 8
2.10 Specific dangers ................................................................................................................................... 8
2.11 In an emergency ................................................................................................................................... 9
2.12 Maintenance and upkeep .................................................................................................................. 9
2.13 Cleaning ................................................................................................................................................ 9
2.14 Persistent risks ........................................................................................................................................ 9
3 ASSEMBLY ......................................................................................................................................................10
3.1 Pre-assembly of the Crossbars .............................................................................................................10
3.1.1 Recommended Top Sizes ................................................................................................................10
3.2 Pre-assembly of the Gearbox ..............................................................................................................11
3.3 Mounting the Feet ................................................................................................................................11
3.4 Leg Positioning .....................................................................................................................................12
3.5 Mounting the Crossbar .........................................................................................................................12
3.6 Mounting the Axle Drive .................................................................................................................. 13-14
3.7 Mounting the Top Support ...................................................................................................................14
3.8 Adjustment of the Frame Width ...........................................................................................................15
3.9 Mounting the Hand Crank ...................................................................................................................16
3.10 Tighten the Gearbox ............................................................................................................................17
3.11 Mounting the Spacer ..........................................................................................................................18
3.12 Mounting the table top ........................................................................................................................18
3.13 Mounting the power supply underneath the table top . ....................................................................18
3.14 Clearance around the wall or moving parts 25mm of the table top .................................................19
4 CORRECT POSITION OF SEAT ..........................................................................................................................20
5 TECHNICAL SPECIFICATIONS ................................................................................................................... 21-22
6 OPERATION AND INDICATORS ......................................................................................................................23
6.1 Indicators .............................................................................................................................................23
7 CUSTOMER SERVICE ......................................................................................................................................24
8 MANUFACTURER ............................................................................................................................................24
9 RECYCLING ...................................................................................................................................................24
9.1 Taking the workstation apart ..............................................................................................................24
9.2 Recycling ..............................................................................................................................................24

3
Inhaltsverzeichnis
1 ALLGEMEINES ................................................................................................................................................. 25
1.1 Bedeutung der Betriebs– und Montageanleitung ............................................................................. 25
1.2 Sachgemäße Verwendung ................................................................................................................. 25
1.3 Sachwidrige Verwendung ................................................................................................................... 25
1.4 Lieferumfang ........................................................................................................................................ 26
2 SICHERHEITSHINWEISE .................................................................................................................................... 27
2.1 Symbol– und Hinweiserklärungen ........................................................................................................ 27
2.2 Verwendete Symbole am Tischgestell ................................................................................................ 27
2.3 Zulässiges Gesamtgewicht auf dem Tischgestell ................................................................................ 27
2.4 Zulässiges Gesamtgewicht pro Säule .................................................................................................. 28
2.5 Organisatorische Maßnahmen............................................................................................................ 28
2.6 Empfohlene Sicherheitsmaßnahmen .................................................................................................. 28
2.7 Hinweise zur Montage.......................................................................................................................... 28
2.8 Transport und Montage ....................................................................................................................... 28
2.9 Benutzung des Tischgestells ................................................................................................................. 28
2.10 Besondere Gefahrenstellen ................................................................................................................. 28
2.11 Hinweise für den Notfall ....................................................................................................................... 29
2.12 Wartung und Instandhaltung .............................................................................................................. 29
2.13 Reinigung ............................................................................................................................................. 29
2.14 Restrisiken ............................................................................................................................................. 29
3 MONTAGE ...................................................................................................................................................... 30
3.1 Vormontage der Traverse .................................................................................................................... 30
3.1.1 Empfohlene Tischplattenmaße ...................................................................................................... 30
3.2 Vormontage der Getriebebox ............................................................................................................ 31
3.3 Montage der Kufen.............................................................................................................................. 31
3.4 Position der Hubsäulen ......................................................................................................................... 32
3.5 Montage der Traversen ....................................................................................................................... 32
3.6 Montage der Antriebswelle ............................................................................................................ 33-34
3.7 Montage der Plattenträger ................................................................................................................. 34
3.8 Einstellen der Gestellbreite ................................................................................................................... 35
3.9 Montage der Handkurbel .................................................................................................................... 36
3.10 Festziehen der Getriebebox ................................................................................................................ 37
3.11 Montage der Abstandhalter ............................................................................................................... 38
3.12 Montage der Tischplatte ..................................................................................................................... 38
3.13 Montage des Netzteils unter der Tischplatte. ...................................................................................... 38
3.14 Sicherheitsabstand zur Wand oder beweglichen Teilen von 25 mm um die Tischplatte ................. 39
4 ERGONOMISCHE SITZEINSTELLUNG ................................................................................................................ 40
5 TECHNISCHE SPEZIFIKATIONEN ................................................................................................................. 41-42
6 BETRIEBSHINWEISE .......................................................................................................................................... 43
6.1 Fehlfunktionen ...................................................................................................................................... 43
7 KUNDENDIENST .............................................................................................................................................. 44
8 HERSTELLER ..................................................................................................................................................... 44
9 ENTSORGUNG ................................................................................................................................................ 44
9.1 Tischgestell abbauen und ggf. zerlegen ............................................................................................. 44
9.2 Entsorgung ........................................................................................................................................... 44
Deutsch

4
Nederlands
Inhoudsopgave
1 ALGEMEEN .................................................................................................................................................... 45
1.1 Het belang van de montage– en bedieningshandleiding................................................................ 45
1.2 Beoogd gebruik ................................................................................................................................... 45
1.3 Onjuist gebruik ..................................................................................................................................... 45
1.4 Inhoud verpakking ............................................................................................................................. 46
2 VEILIGHEIDSINSTRUCTIES ............................................................................................................................... 47
2.1 Verklaring van symbolen en instructies............................................................................................... 47
2.2 Gebruikte symbolen op het frame ..................................................................................................... 47
2.3 Maximaal toegestaan gewicht op het frame ................................................................................... 47
2.4 Maximaal toegestaan gewicht per kolom ....................................................................................... 48
2.5 Organisatorische maatregeln ............................................................................................................. 48
2.6 Informele veiligheidsmaatregelen ..................................................................................................... 48
2.7 Vereisten aan de monteurs ................................................................................................................ 48
2.8 Transport en montage......................................................................................................................... 48
2.9 Gebruik van het frame ........................................................................................................................ 48
2.10 Specifieke gevaren ............................................................................................................................. 48
2.11 Instructies voor noodgevallen ............................................................................................................. 49
2.12 Onderhoud en instandhouding .......................................................................................................... 49
2.13 Reiniging .............................................................................................................................................. 49
2.14 Overige risico’s .................................................................................................................................... 49
3 MONTAGE .................................................................................................................................................... 50
3.1 Voormontage van de crossbar........................................................................................................... 50
3.1.1 Aanbevolen bladmaat .................................................................................................................. 50
3.2 Voormontage van de gear box ......................................................................................................... 51
3.3 Montage van de voeten .................................................................................................................... 51
3.4 Positioneren van de benen ................................................................................................................ 52
3.5 Montage van de crossbar .................................................................................................................. 52
3.6 Montage van de aandrijfas ............................................................................................................53-54
3.7 Montage van de bladdragers ............................................................................................................ 54
3.8 Instellen van de frame-breedte .......................................................................................................... 55
3.9 Montage van de hendel .................................................................................................................... 56
3.10 Aandraaien van de gear box ............................................................................................................ 57
3.11 Montage van de afstandhouders ...................................................................................................... 58
3.12 Montage van het werkblad ................................................................................................................ 58
3.13 Montage van de handbediening....................................................................................................... 58
3.14 Afstand van 25 mm tussen de muur of andere objecten en het werkblad ...................................... 59
4 CORRECTE ZITPOSITIE .................................................................................................................................... 60
5 TECHNISCHE SPECIFICATIES ..................................................................................................................... 61-62
6 BEDIENING EN GEBRUIKSAANWIJZINGEN .................................................................................................... 63
6.1 Gebruiksaanwijzingen ......................................................................................................................... 63
7 KLANTENSERVICE .......................................................................................................................................... 64
8 FABRIKANT .................................................................................................................................................... 64
9 RECYCLING .................................................................................................................................................. 64
9.1 Demontage van het frame................................................................................................................. 64
9.2 Recycling ............................................................................................................................................. 64

5
English
1 General
1.1 Local value of the assembly/Operating Manual
The guiding principle for safe use and trouble-free operation of this workstation frame is knowledge of
basic safety information and regulations. This assembly/operating manual contains the most important
information needed for assembling and operating the workstation frame safely. This assembly/
operating manual, in particular the safety information contained herein, must be observed by any
person building the frame and working on the finished surface. More importantly, the rules and regula-
tions applying to accident prevention in the locality in which the workstation frame is to be used must
be observed at all times.
1.2 Intended use
The workstation frame must be used only as a height-adjustable workstation for sitting/standing use in
offices or other enclosed areas. The frame must be used for this purpose only. The workstation frame
may be set up and operated solely in office environments. Do not use the workstation frame in the
home. Please observe the provisions of Section 2, Safety Information. Children may be unaware of the
dangers presented by the workstation frame if unsupervised. Any other use than the above shall be
deemed improper. The manufacturer can in no way be held liable for damage arising from improper
use. This appliance is not intended for use by persons (including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience and knowledge, unless they have been given super-
vision or instruction concerning use of the appliance by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the appliance.
Intended use shall also include:
 Observation of all information from the assembly/operating manual and
 Prohibition of any sort of addition to/conversion of the workstation.
1.3 Improper use
 Never use the workstation frame to lift people or loads.
 Do not exceed the maximum load of the workstation frame.
 Do not use the workstation frame in the home; alternatively, use it only in offices.
WARNING: Any changes or modifications not expressly approved by the manufacturer could
void the user’s authority to operate the equipment.

6
1.4 Content Box Assembly requires 2 people!
English
Items
2x
3
1x
1 2x
4 2x 6
1x
9
1x
10
1x
8
1x
7
4x
11
2x
12
1x
5
Hardware Kit
2x
G
M8x50
2x
H
M6x16
8x
E
M10x35
4.5x20
24x
J
4x
A 4x B 8x C 8x
D
2x
F
Tools
M6x25 M6 M6
1x
2
M10 M5 M2.5
4.5x16
4x
K

7
2 Safety Information
2.1 Symbols/Warnings
The assembly/operating manual uses the following terms and signs to indicate dangers:
This symbol indicates an immediate threatening situation for any person’s life or health.
Failure to adhere to such information may have serious consequences for health, or
could even result in life-threatening injury or death.
This symbol indicates important information. Failure to adhere to such information
could lead to damage to the workstation.

2.2 Symbols used on the workstation frame
Do not place objects or parts of the body under the workstation frame or between
the cross members. This could cause serious injury or even result in death.
2.3 Maximum weight allowed on frame
Do not exceed the maximum permitted load of 60 kg (including table top) on the
workstation frame. Avoid unbalanced load, distribute the weight evenly, otherwise
overload may occur. Overloading a frame may cause breakage and close by indi-
viduals may suffer serious injuries as a consequence.
60 kg
20KG
Example :
English
All weight should be distributed evenly.
> 60 kg

8
2.5 Organizational measures
 The workstation frame can best be assembled by two people. Turning the frame, once the work
surface has been fitted, is a task in particular which requires two people!
2.6 Informal safety measures
 Keep the assembly/operating manual in the place where the workstation frame is used at all
times.
 Make sure that all safety information on the table (see Section 2.2, Symbols used on the work-
station frame) is legible, replacing the same if necessary.
2.7 Note for those assembling the workstation
 The workstation must be assembled/worked on by persons over the age of 16.
 The persons referred to above must have read and understood the assembly /operating manu-
al.
2.8 Transport and assembly
 The workstation frame must be moved by two persons only, and in such cases must be retract-
ed.
 Do not drag or pull the workstation frame over the floor.
 Assemble the workstation frame with the supplied tools only. They are the only tools which en-
sure that the screws can be tightened to the correct torque.
2.9 Use of the workstation frame
 Do not allow children to use the workstation frame unsupervised. Children may be unaware of
the dangers presented by the workstation frame. They would be in serious danger of injuring
themselves, possibly even with fatal consequences. Further adjustment must then be impossible
as a safeguard against use by children.
 The workstation frame must only be used in appropriate areas.
 Do not use the workstation frame on an uneven surface. In such conditions it will not be steady.
 Never exceed the maximum load on the workstation frame.
2.10 Specific dangers
 When adjusting the height of the frame there is danger of injury, make sure that there is no-one
else in the immediate surroundings of the frame.
 When assembling the workstation frame, make sure there is ample space to avoid collisions (i.e.
inclination of roof, fixed objects, filing cabinets, waste-paper bins etc.) in all imaginable direc-
tions.
 Make sure there is ample space to avoid collisions if there are objects on the work surface such
as computers or computer peripherals.
 Make sure there is clearance of at least 25 mm from all other furniture, all around the workstation
frame.
2.4 Maximum weight allowed per column
Do not exceed the maximum permitted load of 30 kg (including table top) on a col-
umn. Overloading a frame may cause breakage and close by individuals may suffer
serious injuries as a consequence.
30 kg
English

9
2.11 In an emergency
 Stop using the workstation frame at once if you notice anything unusual (strange sounds etc.).
 Have the workstation frame repaired by specialists. Refrain from using the workstation frame un-
til it has been successfully repaired.
2.12 Maintenance and upkeep
 The workstation frame and its components are low-maintenance items and need no special
regular maintenance.
 Do not perform any repairs on the work surface or other components yourself.
 Do not alter the construction of the work surface or its frame.
 Any faulty components removed must be replaced with new, original components from the
manufacturer. Use only original replacement parts made by the manufacturer. Have any such
work carried out by a specialist, making reference to this Assembly/operating manual.
2.13 Cleaning
 Dust the workstation frame once a week with a dry cloth.
 Clean the workstation frame with a damp cloth and a weak solution of cleaner once a fort-
night.
2.14 Persistent risks
This workstation frame has been built to the state of the art and to recognized safety regulations.
Nonetheless, its use may constitute a risk to the health and safety of users or third parties, damage to
the workstation frame or to other items. The workstation frame must be used only:
 for the purpose for which it was intended.
 if it is completely safe to do so.
English

10
1
3 Assembly
Before attempting assembly, read the Safety Information in Section 2.
Do not tighten the set screws on the crossbars yet !
To protect components and the floor from scratches, it is advisable to use a pad before
assembly. You can, for example, use the supplied cardboard by unfolding it.
Frame set-up Width / size table top Depth / size table top Table Top Thickness
110 cm 120 cm 80 cm 2.5 cm
130 cm 140 cm 80 cm 2.5 cm
150 cm 160 cm 80 cm 2.5 cm
170 cm 180 cm 80 cm 2.5 cm
3.1 Pre-assembly of the Crossbars
3.1.1 Recommended Top Sizes
English
10
10
E
11

11
A
D 4
1
3.3 Mounting the Feet
English
 2
9
8
G
H F
2
 3
3.2 Pre-assembly of the Gearbox
Do not tighten the screws on the gearbox yet !

12
5
11 12
3.4 Leg Positioning
Position the left leg and right leg as per above shown.
Secure the pre-assembled leg from falling over.
Left Leg
Right Leg
1
2
English
3.5 Mounting the Crossbar
4
C
C
11

13
English
6
5
3.6 Mounting the Axle Drive
6
7
6

14
3.7 Mounting the Top Support
3 C
C
3
English
8
9
Ensure the shaft does not protrude from the top plate.

15
10
3.8 Adjustment of the Frame Width
Adjust the frame into the desired width. Tighten the
set screws on the crossbar with Allen key M5.
English
11
Tighten the hex nuts on the axle drive with Spanner M10.

16
3.9 Mounting the Hand Crank English
10
7
12
13
Tighten the set screw with
Allen Key M2.5.

17
English
3.10 Tighten the Gearbox
14
Adjust up & down
before tightening the
screws to reduce
stress on the shaft.
Adjust left & right before
tightening the screws to
make sure gear is
straight and to reduce
stress on crank.
15
Please make sure that the workstation frame can move
freely and correctly.

18
24x
J
17
B
English
3.12 Mounting the table top
3.13 Mounting the power supply underneath the table top
3.11 Mounting the Spacer
16
4x
K

19
25mm 25mm
25mm
18
3.14 Clearance around the wall or moving parts 25mm of the table top
Allow a minimum clearance of 25mm from the edge of a table top to a wall or moving
parts.
English

20
English
Correct sitting posture
Sitting incorrectly can lead to injuries at joints, bowstrings and muscles. In order to prevent this it is
necessary to adjust your office chair and desk.
Apart from the following advise you should always prevent an uncomfortable sitting posture. If you
feel that the following advices leads you to an uncomfortable sitting posture simply adapt your
needs.
Office Chair
 The sitting height has to be adjusted in way that your knee is angled by 90-120° when your foot
is flat on the ground.
 Sitting properly requires that your lower back touches the back rest. If possible align the seating
depth in order to avoid pressure from the seat pan to your lower leg.
 Sit upright but lean back in a relaxed position. If possible adjust the lumbar support of your chair
to your height. Adjust the back rest in a way that pushes your upper body slightly forward but
still offering enough flexibility to yield movement.
 If possible adjust the height of your armrests. Your shoulders should be in a relaxed position
when your arms are touching the arm rest.
Desk
 Adjust the table height after you have found your correct sitting posture.
 Your elbows should be angled by 90-120° when your arms rest on the table top. The edge of
the top should not press against your arms.
Equipment on the desk
 Incident light (day light or lamps) on your monitor should approach the surface of your screen
by an angle of 90°.
 The height of your monitor should be adjusted in way that enables you to look slightly down-
ward while focusing the center of your screen.
 Please keep a distance of 60-70 cm from your screen.
 A careful posture for your wrists can be achieved by a flat narrowed keyboard.
 Please heed the advice in the manuals of your further (ergonomical) equipment.
4 Correct position of seat