activTek INDUCT 2000 User manual

READ MANUAL CAREFULLY FOR PROPER USE
AND OPTIMAL OPERATION.
INDUCT 750
INDUCT 2000
Electronic Air Purification System

2
GENERAL INFORMATION
CONTENTS
Product Overview . . . . . . . . . . . . . . . 2
Specifications. . . . . . . . . . . . . . . . . 2
Storage and Disposal . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . 3
Product Features . . . . . . . . . . . . . . . 4
Installation Hardware (Supplied) . . . . . . . . 4
Recommended Installation Tools. . . . . . . . 4
Installation Requirements . . . . . . . . . . . 5
Electrical Requirements . . . . . . . . . . . . 6
Installing the Unit . . . . . . . . . . . . . . . 7
Changing the ActivePure®Cell . . . . . . . . . 9
Replacing the Ballast. . . . . . . . . . . . . .10
Maintenance/UV Bulb Indicator. . . . . . . . . 12
Replacement Parts & Service. . . . . . . . . . 12
Warranty Information . . . . . . . . . . . . .13
FCC Declaration & Responsible Party . . . . . .14
PRODUCT OVERVIEW
Congratulations on your purchase of the activTek INDUCT 750/2000 air purification enhancement system!
The unit is easily mounted into the supply side of air conditioning and heating system air ducts by an electrician or
HVAC professional, where it will provide 24/7 surface and air disinfection. Please read and follow all service procedures
outlined in this manual before installing or performing maintenance.
STORAGE AND DISPOSAL
Do not dispose of this product as household waste.
Electrical waste and electronic products should be
appropriately recycled as required by practices
established by your local authority.
SPECIFICATIONS
activTek INDUCT 750/2000
• Model Number: A1022D (750) & A1023D (2000)
• Sales Number: US40338B (750) & US40663B (2000)
Technology:
ActivePure®
Electrical:
• Input Voltage: 100/240 V; ~ 50/60Hz
• 0.17A 17 watts (750)
• 0.17A 19 watts (2000)
Mechanical:
• Distribution via Air Handler
Safety Switch Installed
Weight & Dimensions:
• 3 lbs (1.36 kg)
• 9.62” x 9.62” x 7.48” (750)
(24 cm x 24 cm x 19 cm.)
• 8.5”H x 8.5” W x 11”D (2000)
(24 cm x 24 cm x 28.5 cm.)
Operating Temperature:
• 34 ºF to 200 ºF (1 ºC – 93 ºC)
Recommended Maximum Coverage in a
Contiguous Space1:
• Every facility is unique and proper configuration
is an important as the technology. To validate
coverage in your facility, speak to your sales
representative or call customer service at
866.736.0503.
Warranty:
• Limited 5 Year Warranty
DBG Group Investments, LLC reserves the right to change or
modify any specification without notice.
Record information regarding your new activTek INDUCT 750/2000
here. Retain for future reference.
Model No.
Serial No.
Date of Purchase
Independent Distributor/Contractor:
Name
Phone No.
Address
FILL IN AND SAVE
1. Assumes 8 foot ceilings. Solutions should be customized based
upon a variety offactors including HVAC system capabilities and
settings, air flows taking into accountwalls, airpressure, and doors,
ambient air temperatures and humidities, variable density, known
VOC concentrations, and otherlayers of protection.

3
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
• UV Light in operation; do not operate unless the unit is completely and
correctly assembled; failure to follow warnings may result in
severe eye damage and electrical shock
• To prevent damage to the unit, operating environment temperature must
never exceed 200 oF (93 oC)
• To reduce the risk of electric shock, this equipment may have a grounding
type plug that has a third (grounding) pin; this plug will only fit into a
grounding type power outlet; if the plug does not fit into the outlet, contact
qualified personnel to install the proper outlet; DO NOT alter the plug in any
way
• This unit is equipped with a universal ballast that operates at nominal
voltages between 120 and 240 VAC, 50/60 Hz
• To Reduce the Risk of Electric Shock – Do not use in wet or damp locations;
this equipment emits UV-C radiation; Do not locate equipment in any
location allowing direct line-of-sight to vents, returns, or other duct openings
• DO NOT use this unit with an extension cord
WARNING
Location for Protective Earth Line.
CAUTION
• Wiring and installation of this unit must be done by a licensed HVAC
contractor or electrician; failure to do so will void warranty of the product
• When the unit is installed in a roof mounted HVAC system, the unit must be
protected from the elements
Read this manual in its entirety before using your activTek INDUCT750/2000.
Keep out of the reach of children.
• Live voltage may be present
• Disconnect power at the breaker or fuse panel before servicing unit; always follow OSHA lockout procedures
to prevent accidental exposure to electrical energy
• If installed near a furnace or where emergency heat coils could raise the temperature inside the plenum, cycle
the AC unit through three full heating cycles assuring that the temperature never exceeds 200 °F (93 °C); the
ActivePure®Cell must not exceed 200 °F (93 °C)
• If the unit is hard wired, be sure the power to the unit is o; always follow OHSA electrical lockout safety
requirements to prevent accidental release of energy during service or maintenance activities
• Never attempt to check operation of the ActivePure®Cell(s) by direct observation; severe eye damage can
result; use the indicator lamps on the bottom of the ballast only

4
It is important to be familiar with the parts of the activTek INDUCT 750/2000. If any parts are missing, contact
your sales representative or Distributor.
PRODUCT FEATURES
INSTALLATION HARDWARE (SUPPLIED)
(8) #8 — .75
1/4" Self-tapping screws
Item # US7067
(2) Thumb screws
Item # 36-00213
(2) Thumb nuts
Item # 36-00214
(4) #6 — 32 x 2 inch Threaded bolts
Item # US70680 (4) #6 — 32 Toggle
bolt wall anchors
Item # US70682
RECOMMENDED INSTALLATION TOOLS
3 1/2" Hole Saw
(for wood or metal)
Utility Knife
1/4" Nut
Driver Bit
Drill / Power
Driver
Tin Snips
(for metal ductwork)
Phillips
Screwdriver
Dust Mask
3/8" Drill Bit
(if installing into berglass
ducting with toggle bolts)
1/4
YOU MAY ALSO NEED:
CAUTION
When the unit is installed in a roof mounted HVAC system, the unit must
be protected from elements.
Safety
Switch
UV bulb indicator
Replaceable ActivePure
®
Cell
(includes UV Lamp)
Mounting Plate

5
If installed near a furnace or where emergency heat coils could raise the
temperature inside the plenum, cycle the AC unit through three full heating
cycles assuring that the temperature never exceeds 200 °F
(93 °C). The ActivePure®Cell must not exceed 200 °F (93 °C).
WARNING
INSTALLATION REQUIREMENTS
CAUTION
• This unit must be installed by a licensed HVAC contractor or electrician;
failure to do so will void warranty of the product
• When the unit is installed in a roof mounted HVAC system, the unit must be
protected from the elements
1. Unit should be installed after the air handler in the
HVAC system.
2. The ductwork around the installation area should
be clean and dry to ensure proper adhesion of the
gasket materials and any tape used.
3. When installing near a furnace or heating coils, run
the heating system through three (3) full heating
cycles to ensure the temperature of the INDUCT unit
does not exceed 200˚F.
4. An approximate 3.5” (8.89 cm) opening will need to
be cut into the existing ductwork to install the unit
properly.
Min. 8” x 8” Metal
Ductwork
Min. 10” x 10”
Fiberglass
Ductwork
Air Handle
Max.
6 ft.
Installation Clearance

6
Electrical Requirements for 120 volt installation only
• To use a 120 volt plug, be sure to locate the unit within 6 ft. of a standard 120 volt grounded outlet.
Use of an extension cord is not recommended due to safety considerations.
• Install a US “B” UL approved plug onto the blunt cord.
• Hardwiring Requirements (All units)
NOTE: Permanent wiring of the unit into your HVAC system must be done by a licensed HVAC installer
or electrical contractor only.
For 120V domestic units: Black = L1, White = Neutral, Green = Ground
For commercial units: Black = L1, White = L2, Green = Ground
For International Units: Brown = L1, Blue = L2, Green w/yellow stripe = Ground
ELECTRICAL REQUIREMENTS
Wiring of the unit into your HVAC system should be done by a licensed HVAC
installer or electrical contractor only
CAUTION
To Reduce the Risk of Electric Shock – DO NOT use in wet or damp locations.
This equipment emits UV-C radiation. DO NOT locate equipment in any
location allowing direct line-of-sight to vents, returns, or other duct openings.
Disconnect from supply before servicing or replacing.
WARNING

7
INSTALLING THE UNIT
1. Locate suitable
area of duct for
installation.
2. Cut away insulationto
expose metal duct (if
needed).
3. Mark location for
3.5" opening using the
mounting plate.
To Reduce the Risk of Electric Shock – DO NOT use in wet or damp locations;
this equipment emits UV-C radiation. DO NOT locate equipment in any
location allowing direct line-of-sight to vents, returns, or other duct openings.
Disconnect from supply before servicing or replacing.
WARNING
Find the optimal position downstream from the air handler. Ensure location in duct has enough room for the mounting
plate. It is recommended for maximum eectiveness that the unit be placed as close to the air handler as possible.
• Hard wiring unit into HVAC system must be done by a licensed HVAC
installer or electrical contractor only
• When the unit is installed in a roof mounted HVAC system, the unit must be
protected from elements
• Unit requires power 24/7; DO NOT install where power to the unit will be
cycled on and o
CAUTION
a. Using the mounting plate, mark
fourcutting method holes on
duct.
b. Drill four holes where
marked.
c. Cut between holes using
tin snips.
ALTERNATE CUTTING METHOD:

8
5. Remove backing from mounting
plate adhesive gasket.
6. Centeropenings and press
mounting plate onto duct.
The adhesive gasket will hold
the mounting plate in place.
1/4
7. Secure the mounting plate using (8)
#8 self-tapping screws.
8. Insert unit into opening. Be
sure the air will pass though the
ActivePure®Cell honeycomb
matrix.
9. Secure the unit to the
mounting plate with (4) thumb
nuts.
10. Plug unit into working
power receptacle.
NOTE: Unit requires power 24/7. Do not install where power to the unit will be cycled on and o.
INSTALLING THE UNIT (CONT.)
4. Cut hole in duct using
3.5" hole saw.

9
CHANGING THE ACTIVEPURE®CELL
1. Disconnect (unplug) power
cord from unit.
2. Remove the (4) thumb nuts. 3. Remove the unit from the
mounting plate.
Power Cord
5. Remove the used
ActivePure Cell from the base unit
and dispose of the bulb properly.
4. Remove the two thumb
screws holding the ActivePure
Cell.
6. Plug the new ActivePure Cell into
the base unit. Be sure Air Flow
/ Honeycomb Cell direction is
correct.
WARNING
• UV Light in operation; disconnect unit from power cord before servicing;
failure to follow warnings may result in severe eye damage
• If the unit is hard wired, be sure the power to the unit is o; always follow OHSA
electrical lockout safety requirements to prevent accidental release of energy
during service or maintenance activities
7. Secure with (2)thumb
screws.
8. Insert the unit into the
mounting plate.

10
9. Secure unit with (4)
thumb nuts.
10. Reconnect power
supply.
Power Cord
NOTE: Always follow OHSA electrical lockout safety requirements to prevent accidental release of energy
during service or maintenance activities.
Visit www.lamprecycle.org for proper bulb disposal regulations
CHANGING THE ACTIVEPURE®CELL (CONT.)
REPLACING THE BALLAST
2. Open the ballast housing by
removingthe four (4) screws, then remove
the cover.
1. Disconnect (unplug) powercordfrom
unit.
Power Cord
• Never attempt to check operation of the ActivePure®Cell(s) by direct
observation; severe eye damage can result; use the indicator lamps on the
bottom of the ballast only
• Disconnect power at the breaker or fuse panel before servicing unit; always
follow OSHA lockout procedures to prevent accidental exposure to electrical
energy; release of energy during service or maintenance activities
WARNING

11
REPLACING THE BALLAST (CONT.)
7. Replace coverand securewith the
original four (4) screws.
8. Re-install unit if removed from duct.
Reconnect power and checkfor proper
operation.
UV Bulb
Indicator
6. To reconnect wiring, (A) press each tab onthe ballast and insert wire.
(B) Release tab and gently pull wire to ensure it is properly locked into place.
LED+ LED- RED RED BLUE BLUE
BLACK WHITE GREEN
A
B
UPPER (6 terminals)
• Black LED wire in LED+
• White LED wire in LED-
• 2 Blue wires in BLUE
• 2 Red wires in RED
LOWER (3 terminals)
• Black power wire in BLACK
• White power wire in WHITE
• GREEN is not used
NOTE: UV Bulb Indicator should be lit when
in operation.
4. Remove the two (2) nuts
securing ballast to the case.
Remove the ballast.
5. Place new ballast intothe
original location and secure
using the two nuts removed in
step 4.
3. Disconnect all ballast wiring by
pressing down on connector
tabs and pulling wire straight
out.

12
REPLACEMENT PARTS FOR INDUCT 750 PART NUMBER
Ozone Free ActivePure®Cell 9950115
Ozone ActivePure®Cell
(Not available in California)
US71114
REPLACEMENT PARTS & SERVICE
Base Unit
Mounting Plate
ActivePure®Cell
REPLACEMENT PARTS FOR INDUCT 2000 PART NUMBER
Ozone Free ActivePure®Cell US71088
Ozone ActivePure®Cell
(Not available in California)
US70678
Your activTek INDUCT 750/2000 unit requires no periodic maintenance
beyond normal replacement of the ActivePure®Cell every year. UV bulb has
an eective life of 9,000 hours.
NOTE: For optimal performance, we recommend the replacement of the
ActivePure®Cell every year, even if the UV lamp appears to be
operating normally.
The UV lamp operation indicator on the face of the unit will glow when the
UV lamp is in use. If the indicator does not glow and the unit has power, the
ActivePure®Cell should be replaced.
MAINTENANCE/UV LAMP INDICATOR
UV lamp
operation indicator

13
Limited Five (5) Year Warranty
To register your activTek INDUCT 750/2000 unit, visit www.activTek.net/warranty.
To view full details on warranty coverage, visit www.activTek.net/manuals.
WARRANTY INFORMATION
WHAT IS COVERED BY THIS WARRANTY
We warrant the INDUCT 750 or INDUCT 2000 (excluding
filters) to the Customer, subject to the conditions below,
against defects in workmanship or material, provided that
the products are returned to a service location within the
following time periods:
• INDUCT 750 or INDUCT 2000 within five (5) years of date
of purchase.
• ActivePure Cell and Lamp within one (1) year from the
date of purchase.
MAINTENANCE REQUIREMENTS
This warranty is expressly conditioned upon proper
installation, operation, cleaning and maintenance, all in
accordance with the Owner’s Manual. Failure to meet any
of these requirements will void this warranty. Servicing of
your INDUCT 750 or INDUCT 2000 by parties other than our
authorized representatives and/or using parts other than
genuine parts will also void this warranty.
HOW TO OBTAIN WARRANTY SERVICE
Customer must contact their activTek Distributor and provide
proof of purchase within the above time periods. We will
repair or replace and return the product, without charge and
within a reasonable period of time, subject to the conditions
herein, if its examination shall disclose any part to be
defective in workmanship or material. If we, in our discretion,
are unable to repair the product after a reasonable number of
attempts, we will provide either a refund of the purchase price
or a replacement unit, at the company’s option.
WHAT IS NOT COVERED BY THIS WARRANTY
Ordinary wear and tear shall not be considered a defect in
workmanship or material. These warranties do not apply
to filters nor for loss or damage caused by accident, fire,
abuse, misuse, improper installation, leaking, modification,
misapplication, or by any repairs other than those provided
by our authorized Service Center. This warranty is non-
transferable.
UNAUTHORIZED CHANNELS & MISSING SERIAL
NUMBERS
If a valid serial number is missing from the product, the
warranty will be voided. ActivTek products are authorized for
sale through activTek Distributors only. Warranties are voided
if a product is purchased through unauthorized channels; this
includes websites that are not authorized to use activTek’s
trademarked names, images and logos as well as Internet
auction sites (e.g. eBay and craigslist). The only approved
Internet presence for activTek products is www.activTek.net.
To confirm warranty coverage prior to purchasing a product,
contact activTek at 866-736-0503 with the serial number
located on the back of the unit.
EXCLUSION OF OTHER WARRANTIES AND CONDITIONS
EXCEPT AS PROVIDED HEREIN, WE MAKE NO
REPRESENTATION OR WARRANTY OF ANY KIND. ALL OTHER
WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, ARE
HEREBY EXPRESSLY DISCLAIMED, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
LIMITATION OF LIABILITY FOR SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES
WE SHALL NOT IN ANY CASE BE LIABLE FOR SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
FROM BREACH OF EXPRESSED OR IMPLIED WARRANTIES,
CONDITIONS, GUARANTEES OR REPRESENTATIONS,
BREACH OF CONTRACT, NEGLIGENCE OR ANY OTHER
LEGAL THEORY. Such excluded damages include, but are
not limited to, loss of profits or revenue, and loss of the use
of the products, and any loss caused by leaks or other water
damage.
FOR U.S. APPLICATION ONLY
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. Some states
do not allow limitations on warranties, or on remedies for
breach. In such states, the above limitations may not apply
to you.
FOR CANADIAN APPLICATION ONLY
Exclusion of Subsequent Owners: Except as otherwise
required by applicable legislation, this warranty is not
transferable. This warranty gives you specific legal rights
and you may also have other rights which vary from province
to province. Some provinces and territories do not allow
limitations on warranties, or on remedies for breach. In such
provinces or territories, the above limitations may not apply
to you.
If any provision of this warranty or part thereof is held by
a court of competent jurisdiction to be invalid, illegal, or
unenforceable, the validity, legality and enforceability of
the remaining provisions or parts thereof will not in any way
be aected or impaired within the jurisdiction of that court.
This entire warranty shall continue to be valid, legal and
enforceable in any jurisdiction where a similar determination
has not been made.
This warranty is provided by:
DBG Group Investments, LLC
1300 Valley Drive
Bristol, VA 24201
SERVICE
Every eort is made to ensure customers receive an up-
to-date instructions manual on the use of our products;
however, from time to time, modifications to our products
may without notice make the information contained herein
subject to alteration. For the latest information, please visit
our web site.

14
FCC Declaration of Conformity
Name: activTek INDUCT 750/2000
Model: A1022D (activTek INDUCT 750)
A1023D (activTek INDUCT 2000)
Produced by: DBG Group Investments, LLC
dba activTek Environmental
This device complies with Part 15 of the
FCC Rules.
Responsible Party
DBG Group Investments, LLC
dba activTek Environmental
1300 Valley Drive
Bristol, VA 24201
Ph: 866.736.0503
Signature:
Printed Name: Andrew Eide
Title: Vice President of Product Development
and Manufacturing
Date: 04/26/22
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant of Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy, and if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio
or television, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the Distributor or an experienced
radio/TV technician for help.
FCC DECLARATION & RESPONSIBLE PARTY

15

16
DBG Group Investments, LLC
dba activTek Environmental
1300 Valley Drive
Bristol, VA 24201
www.activetek.net
DBG Group Investments, LLC | 1300 Valley Drive | Bristol, VA 24201 | 866.736.0503
Assembled in U.S.A. | © DBG Group Investments, LLC. All Rights Reserved
ID_OM_750-2K_65-00752_VA-01318

Assembled in U.S.A. | © DBG Group Investments, LLC. All Rights Reserved
LIRE ATTENTIVEMENT LE MANUEL AFIN D’UTILISER
CORRECTEMENT L’APPAREIL ET D’ASSURER SON
FONCTIONNEMENT OPTIMAL.
INDUCT 750
INDUCT 2000
Système électronique de purification de l’air

18
INFORMATIONS GÉNÉRALES
TABLE DES MATIÈRES
Description du produit. . . . . . . . . . . . . 18
Spécifications. . . . . . . . . . . . . . . . .18
Stockage et mise au rebut . . . . . . . . . . .18
Consignes de sécurité importantes . . . . . . .19
Caractéristiques du produit . . . . . . . . . 20
Matériel d’installation (fourni) . . . . . . . . 20
Outils d’installation recommandés . . . . . . 20
Exigences d’installation . . . . . . . . . . . .21
Installation électrique . . . . . . . . . . . . 22
Installation de l’appareil . . . . . . . . . . . 23
Changement de la cellule ActivePure®. . . . . 25
Changer le ballast . . . . . . . . . . . . . . 26
Témoin lumineux UV/Témoin
lumineux d’entretien. . . . . . . . . . . . . 28
Pièces de rechange et service . . . . . . . . 28
Informations relatives à la garantie . . . . . . 29
Déclaration FCC et partie responsable . . . . 30
DESCRIPTION DU PRODUIT
Félicitations pour l’achat de votre système d’amélioration de la purification d’air activTek INDUCT 750/2000! L’unité
se monte facilement sur le côté alimentation des conduits d’air d’un système de climatisation et de chauage, par un
électricien ou un professionnel du CVC, afin d’assurer une désinfection des surfaces et de l’air 24 h/24 et 7 j/7. Veuillez
lire et suivre toutes les procédures d’entretien décrites dans le présent manuel avant de l’installer ou de le réparer.
ENTREPOSAGE ET ÉLIMINATION
Ne pas jeter ce produit avec les ordures ménagères. Les
déchets électriques et les produits électroniques doivent
être recyclés de manière appropriée, conformément aux
pratiques mises en place par votre administration locale.
SPÉCIFICATIONS
activTek INDUCT 750/2000
• Numéro de modèle: A1022D (750) & A1023D (2000)
• Numéro de série: US40338B (750) & US40663B (2000)
Technologie:
ActivePure®
Électrique:
• Tension d’alimentation: 100/240 V; 50/60Hz
• Courant: 0,17A (750)
• Puissance: 19W (2000)
Mécanique:
•Distribution par une unité de traitement
de l’air avec interrupteur de sécurité
Poids et dimensions:
• 3 lb (1,36 kg)
• 9,62 po H x 9,62 po L x 7,48 po P (750)
(24 cm x 24 cm x 19 cm)
• 8,5 po H x 8,5 po L x 11 po P (2000)
(24 cm x 24 cm x 28,5 cm)
Température de fonctionnement:
• 34 °F à 200 °F (1 °C — 93 °C)
Couverture maximale recommandée
pour un espace étroit1:
• Chaque lieu est unique et une bonne
configuration est aussi importante que la
technologie. Pour approuver la couverture dans
votre bâtiment, consultez votre représentant
commercial ou contactez le service à la clientèle
au 1.866.736.0503.
Garantie:
• Garantie limitée de cinq (5) ans
DBG Group Investments, LLC se réserve le droit de modifier
des spécifications sans préavis.
Consignez des renseignements relatifs à votre nouveau activTek
INDUCT 750/2000 here. À conserver pour référence future.
Numéro de modèle
Numéro de série
Date d’achat
Distributeur ou entrepreneur indépendant :
Nom
Numéro de téléphone
Adresse
À REMPLIR ET À CONSERVER
1. Suppose des plafonds de 8 pieds de haut. Les solutions doivent
être personnalisées en fonction de diérents facteurs, notam-
ment les capacités et les paramètres du système de CVC, le débit
d’air en tenant compte des murs, la pression de l’air et les portes,
ainsi que les températures et taux d’humidité de l’air ambiant,
la densité variable, les concentrations connues de composés
organiques volatiles et d’autres couches de protection.

19
CONSIGNES DE SÉCURITÉ IMPORTANTES
CONSERVER CES CONSIGNES
• Lampe UV en marche; ne pas faire fonctionner l’appareil avant qu’il ne soit
complètement et correctement monté; le non-respect de cet avertissement
peut entraîner de graves lésions oculaires et une décharge électrique
• Pour éviter d’endommager l’appareil, la température de l’environnement de
marche ne doit pas dépasser 200 oF (93 oC).
• Afin de réduire les risques de décharge électrique, cette unité peut posséder
une fiche de courant avec mise à la terre avec une troisième broche (de mise
à la terre); Cette fiche ne s’insère que dans une prise de courant avec mise à
la terre; si la fiche ne s’insère pas dans la prise, demandez à un professionnel
qualifié d’installer une prise adéquate; NE PAS modifier la fiche de quelque
manière que ce soit
• Cet appareil est équipé d’un ballast universel fonctionnant avec une tension
nominale comprise entre 120 et 240 VCA, 50/60 Hz
• Afin de réduire les risques de décharge électrique, NE PAS utiliser dans
des lieux mouillés ou humides; cet appareil émet un rayonnement UVC; NE
PAS placer l’unité dans des lieux permettant une exposition directe aux
ventilations, retours ou autres bouches d’aération
• NE PAS utiliser cet appareil avec une rallonge
MISE EN
GARDE
Emplacement de la mise à la terre.
ATTENTION
• Le branchement et l’installation de cet appareil doivent être eectués par un
fournisseur ou un électricien agréé en CVC, sinon la garantie du produit sera
annulée
• Si l’appareil est installé dans un système CVC fixé sur un toit, il doit être
protégé des éléments
Veuillez lire entièrement ce manuel avant d’utiliser votre activTek INDUCT 750/2000.
Garderhorsdelaportéedesenfants.
• Possibilité de haute tension
• Débranchez l’alimentation dans le tableau des disjoncteurs ou des fusibles avant de faire l’entretien; suivez toujours
les procédures de verrouillage OSHA afin de prévenir une exposition accidentelle à l’énergie électrique
• En cas d’installation près d’un appareil de chauage central ou à un endroit où des serpentins chauants pourraient
augmenter la température de la chambre de distribution, faites fonctionner l’unité d’air conditionné pendant trois
cycles de chauage complets en vous assurant que la température ne dépasse jamais 200 °F (93 °C); la cellule
ActivePure®ne doit pas dépasser 200 °F (93 °C).
• Si l’appareil est branché par un câble, assurez-vous que l’alimentation de l’appareil est coupée; suivez toujours les
procédures de verrouillage OHSA afin de prévenir une fuite accidentelle d’énergie durant l’entretien
• N’essayez jamais de vérifier le fonctionnement des cellules ActivePure®par observation directe, cela peut provoquer
des dommages oculaires graves; utilisez uniquement les indicateurs de lampe UV en bas du ballast

20
Il est important de se familiariser avec les composants du système activTek INDUCT 750/2000. En cas de pièce
manquante, veuillez contacter votre représentant commercial ou le service à la clientèle d’ActivePure.
CARACTÉRISTIQUES DU PRODUIT
MATÉRIEL D’INSTALLATION (FOURNI)
(8) #8 - .75
Vis auto-taraudeuses 1/4 po
Réf. nº US70679
(2) Vis à serrage
Item #36-00213
(4) Écrous à serrage
Item #36-00214
(4) #6 - 32 X 2 po Boulons letés
Réf. nº US70680 (4) 32 Boulon à ailettes pour
ancrage au mur
#6 Pièce #US70682
OUTILS D’INSTALLATION RECOMMANDÉS
Scie cloche 3 ½ po
pour bois ou métal
(recommandé)
Couteau tout usage
Embout de
tournevis
¼ po
Perceuse/visseuse
électrique
Pinces à couper le métal
(pour les conduits en métal)
Tournevis
cruciforme
Masque anti-poussières
Mèche de forage 3/8 po
(en cas d’installation dans
des conduits en fibre de
verre avec des boulons à
ailees)
1/4
VOUS AUREZ BESOIN DE:
Si l’appareil est installé dans un système CVC fixé sur un toit, il doit
être protégé des éléments.
ATTENTION
Commutateur de sécurité
Témoin lumineux UV
Cellule remplaçable ActivePure
®
(comprend un témoin UV)
Montage Plaque