Actulux HCV Series User manual

Instruction
Chain drive series HCV
Type: HCVA (230VAC)
Type: HCVAR (230VAC)
#211830
Actulux A/S |Haandvaerkervej 2 |DK 9560 Hadsund |DENMARK |www.actulux.com

2
HCVA/HCVAR
Table of contents
Safety notes........................................................................................................................ 3
Application area.................................................................................................................. 3
Stroke-pushing force diagram ............................................................................................ 3
Features................ ............................................................................................................. 4
Technical data..................................................................................................................... 4
Dimensions for type HCVA................................................................................................. 4
Connection for type HCVA in single mode ......................................................................... 5
Connection for type HCVAR in single mode....................................................................... 5
Connection for type HCVA in synchro mode and Wind-/rain sensor.................................. 6
Connection for type HCVAR in synchro mode ................................................................... 7
Mounting instruction ........................................................................................................... 8
Choice of brackets.............................................................................................................. 8
HMB-HCV-01 Outwards opening window, top hung...................................................... 8
HMB-HCV-02 Inwards opening window, bottom and side hung.................................... 9
HMB-HCV-03 Skylight ................................................................................................... 10
Function of remote control for HCVAR ............................................................................... 11
Pairing HCVAR with remote control ................................................................................... 11
Pairing HCVAR with wireless wind / rain sensor ................................................................ 11
Warranty ............................................................................................................................. 12
Disposal.............................................................................................................................. 12
Contact ............................................................................................................................... 12

3
HCVA/HCVAR
- Operating voltage 230VAC!
- Connection must be carried out by authorized electricians.
- It’s necessary to ensure that people keep away from the operation area of
the drives. Danger of violent pressure in accessible area!
- Use only in dry rooms.
- For opening and closing of facade and roof windows
- Maximum pressure force of the chain depends on the length,
   thepushforceisalwaysthevaluespeciedonthedrive!
Application area
Stroke-pushing force diagram
Safety Notes
Stroke (mm)
Max. Pushing force (mm)

4
HCVA/HCVAR
- Microprocessor controlled Bus synchronization.
- HCVAR is incl. remote control
- Max. 4 pcs. drives can be synchronized.
(1 pcs. HCVAR can be synchronized with up to 3 pcs. HCVA, but max. 1 pcs. HCVAR per
synchro set)
- Push / Pulling, Opening / Closing Speed and Stroke length can be programmed.
- Electronic overload protection.
- Reduced speed and force during the last 50 mm of closing (“Soft-close”).
- Drive is supplied with 2.5 m silicone cable.
- Di󰀨erent types of brackets can be mounted, depending on the window and kind of mounting.
- Tested in accordance with EN 12101-2, EN 50130-4.
- Power supply: 190-250 VAC / 50 Hz Max 10A - Protective class: IP32
- Consumption: 0.5A/230 VAC - Temperature range: -25°C ~ +75°C
- Inrush current: 45A/230 VAC - Locking force: 2000 N
- Leakage current: <0,25mA / 240 VAC - Lifecycle: >11000 double strokes
- Speed open/close: 7 mm/s - Duty cycle: 30% at 10 min. running time
- Soft close speed: 5 mm/s
- Soft close distance: 50 mm
- Soft close force: 200 N
Length of antenna (HCVAR) 35 mm
Features
Technical data
Type Voltage /
Current
Pushing
force
Pulling
force
Stroke
length
Speed
Natural comfort
HCVA/R 500/350 230VAC/25W 500N 500N 350 mm 7 mm/s
HCVA/R 500/600 230VAC/30W 500N 500N 600 mm 7 mm/s
HCVA/R 500/800 230VAC/30W 500N 500N 800 mm 10 mm/s
HCVA/R 500/1000 230VAC/30W 500N 500N 1000 mm 10 mm/s
Dimensions for type HCVA
Stroke Lenght L
350 mm 586 mm
600 mm 711 mm
800 mm 811 mm
1000 mm 916 mm

5
HCVA/HCVAR
Caution!
The white and grey wire are only for changing parameters.
Parameter change can only be made by Actulux or an authorized service and sales partner
by Actulux.
Do not connect the white and grey wire to 230V!
Caution!
The white and grey wire are only for changing parameters.
Parameter change can only be made by Actulux or an authorized service and sales partner
by Actulux.
Note! Do not connect the white and grey wires to 230V!
Do not use wired comfort switch for HCVAR. Use only wireless OPUS switch #111900
Connection for type HCVA in single mode
Connection for type HCVAR in single mode
L
N
PE
L N PE
230VAC / 50Hz
black
brown
blue
yellow/green
white
grey
black
brown
blue
yellow/green
white
grey
N
PE
L N PE
230VAC / 50Hz
L

6
HCVA/HCVAR
Connection for type HCVA in synchro mode and Wind-/rain sensor
Wind-/rain
sensor
AWR-24/250
#111961
black
brown
blue
yellow/green
white
grey
grey
white
black
brown
blue
yellow/green
Caution!
The white and gray wire are used for change parameters or for bus communication for
synchro mode. Parameter change can only be done by Actulux or by an authorized Actulux
service and sales partner.
Note! Do not connect white and grey wire to 230V!

7
HCVA/HCVAR
Note!
Max. 4 pcs. drives can be synchronized.
(1 pcs. HCVAR can be synchronized with up to 3 pcs. HCVA, but max. 1 pcs. HCVAR per synchro
set)
‘
Caution!
The white and gray wire are used for change parameters or for bus communication for
synchro mode. Parameter change can only be done by Actulux or by an authorized Actulux
service and sales partner.
Note! Do not connect white and grey wire to 230V!
Do not use wired comfort switch for HCVAR. Use only wireless OPUS switch #111900
Connection for type HCVAR in synchro mode
black
brown
blue
yellow/green
white
grey
grey
white
yellow / green
blue
brown
black

8
HCVA/HCVAR
Choice of brackets:
*Select suitable screws according to frame material!
Maximum stroke lenght for
this application is 600 mm
Mounting instructions
Application Bracket set Item no. Screws*
Outwards opening window, top hung HMB-HCV-01 390000 No
Inwards opening window, bottom and side hung HMB-HCV-02 390120 No
Skylight HMB-HCV-03 390130 No
Stroke Y
350 mm 227 mm
600 mm 352 mm
Bracket set HMB-HCV-01 for top hung #390000

9
HCVA/HCVAR
Bracket set HMB-HCV-02 for bottom and side hung #390120
Stroke X
350 mm 215 mm
600 mm 340 mm
800 mm 440 mm
1000 mm 545 mm

10
HCVA/HCVAR
Bracket set HMB-HCV-03 for Skylight #33010102
This Document contains proprietary data of Actulux
A/S. No information, reproduction or use of any part
there of may be used without written permission.
Tolerances unless otherwise specified: ISO 2768-mL.
Distance between holes +/- 0.2mm and
diameters +/- 0.1mm. Ri = 1mm for bending
ISO 13920-BH for welding processes
SHEET:
Material <not specified>
Phone int.: [phone]
D
E
F
C
1 2 3 4
B
A
321 5
C
D
4 6 7 8
A
B
5 6 7 8
F
31010100_33010102
E
1 OF 1
HCV 500/350 - 24/36/48VDC
A3
DATE: 15-10-19
w Bracket Set 33010102
1:2
0.863 KG.
-
REV:
Fax int.: [phone]
e-mail: [e-mail]
WEIGHT :
DRAWN BY : GS
SURFACE TREATMENT/FINISH:
www.actulux.com
DWG NO.:
SCALE:SIZE:
TITLE:
MATERIAL:
Actulux A/S
Haandvaerkervej 2
DK 9560 Hadsund
Denmark
Stroke X
350 mm 227 mm
600 mm 352 mm
Note!
The top bracket has to be
mounted straight (parallel) or tilted to the left
side, to keep tension at the back of the chain.
Maximum stroke lenght for
this application is 600 mm.

11
HCVA/HCVAR
Note!
The remote control is operated
at a short press per function.
Long pressures will cause shorter
battery life.
By default, HCVAR comes with a paired remote control (item no.# 111890).
One chain drive remember max. 20 pcs. remote controls.
To access the “Program button” in the drive,
remove the plastic cap on the top of the housing.
Program button
1) Press and hold the “program button” on the chain drive until the
LED / Buzzer indicator lights / beeps.
RELEASE THE BUTTON IMMEDIATELY.
2) Within 5 seconds - press any button on the remote control and its LED indicator lights up.
3) The LED / Buzzer indicator in the chain drive turns o󰀨 after one ash / beep = the remote
control and chain drive are now paired.
If you need to remove one remote, you have to delete all of them; by pressing the “Program
button” for more than 3 seconds until the LED / Buzzer indicator has been switched on and o󰀨
again. Now all remote controls are deleted and you need to pair all of them again.
It is possible to connect a wind / rain sensor wireless to the chain drive.
(See our user manual for wind and rain sensor at www.actulux.com)
Rain sensor # 111960
Wind- & rain sensor # 111961
Function of remote control for HCVAR
Close Stop Open Red LED
Pairing HCVAR with remote control
Pairing HCVAR with wireless wind / rain sensor

12
HCVA/HCVAR
We refer to www.actulux.com
Electrical equipment, accessories and packaging should be recycled for
environment protection!
Don’t dispose electrical equipment into household waste!
Only for EU-Countries: According to the European guideline 2002/96/EG
about waste electrical and electronic equipment and its implementation
into national law, useless electrical and electronic equipment must be
separately collected and recycled for environment protection.
Actulux A/S
Haandvaerkervej 2
9560 Hadsund
Denmark
Tel.: [phone]
Fax: [phone]
e-mail: [email protected]
www.actulux.com
©2017 Actulux A/S
Revision: B07-211830-16.10.2019
Rights to technical modications reserved
Warranty
Disposal
Contact