Inovance MD880 Series Installation instructions

MD880 Series
High Performance Single Drive
AC Drive Hardware Guide
MD880 Series High-performance AC Drive (Single Drive) Hardware Guide
Copyright Shenzhen Inovance Technology Co., Ltd.
Shenzhen Inovance Technology Co., Ltd.
Add.: Building E, Hongwei Industry Park, Liuxian Road, Baocheng No. 70 Zone, Bao’an District, Shenzhen
Tel: [phone]
Fax: [phone]
http: //www.inovance.com
Suzhou Inovance Technology Co., Ltd.
Add.: No. 16 Youxiang Road, Yuexi Town, Wuzhong District, Suzhou 215104, P.R. China
Tel: [phone]
Fax: [phone]
http: //www.inovance.com 19011400 A01
*19011400A01*
A01
Data code 19011400
User Guide

Preface
- 1 -
Preface
Thank you for purchasing the MD880 series high-performance AC drive (single drive
system) developed by Inovance.
As a general-purpose and high-performance current vector AC drive, this product is
mainly used for controlling and adjusting the speed and torque of three-phase AC
asynchronous motors. It is a supplement to the MD880 product family. Using high-
performance vector control technology, the MD880 series AC drive features high
torque output at a low speed, excellent dynamic characteristics, and superior overload
capability. It provides user-programmable features and monitoring software, and
communication bus functions and supports multiple encoder types, delivering rich and
powerful combined functions and stable performance. It can be used to drive textile,
papermaking, drawing, machine tools, packaging, foods, fans, water pumps, and other
automated production equipment.
Notes
◆The drawings in the user guide sometimes show the product without covers or
protective guards to display more details. Remember to install the covers or protective
guards as speci󶍾ed 󶍾rst, and then perform operations in accordance with the
instructions.
◆The drawings in the user guide are shown for reference only and may not match the
product you purchased.
◆The instructions are subject to change, without notice, due to product upgrade,
speci󶍾cation modi󶍾cation as well as e󶍽orts to increase the accuracy and convenience of
the user guide.
■Standards compliance
The MD880 series AC drive complies with the directives and standards listed in the
following table.
Directive Name of Directive Standard
EMC directive 2004/108/EC
EN 61800-3
EN 55011
EN 61000-6-2
LVD directive 2006/95/EC
93/68/EEC EN 61800-5-1
NOTE
◆The product complies with the requirements of standard IEC/EN 61800-
3 on the condition of correct installation and use by following the
instructions in
"3 Electrical Installation"
.
■Related User Guide
User Guide Data Code
SOP-20-880 Series Smart Operating Panel User Guide 19010611

Revision History
- 2 -
Revision History
Date Version Description
October 2020 A00 First release.
March 2021 A01 Minor corrections.

Contents
- 3 -
Contents
Preface ........................................................................................................................................ 1
Revision History ......................................................................................................................... 2
Safety Instructions ..................................................................................................................... 7
Safety Disclaimer................................................................................................................. 7
Safety Levels and De󶍾nitions ............................................................................................. 7
Safety Instructions............................................................................................................... 7
Safety Signs........................................................................................................................ 11
1 Product Information ............................................................................................................. 13
1.1 Overview ...................................................................................................................... 13
1.2 Nameplate and Model Number.................................................................................. 13
1.3 Voltage and Power Rating ........................................................................................... 14
1.4 Technical Data and Model Selection .......................................................................... 15
1.5 Technical Data.............................................................................................................. 16
1.6 Derating ........................................................................................................................ 18
1.7 Overload Capacity ....................................................................................................... 20
1.8 Overall Dimensions...................................................................................................... 21
1.8.1 Overall and Mounting Dimensions of Structures T2 to T9................................... 21
1.8.2 Overall and Mounting Dimensions of Structures T10 to T12 (Without Reactors)22
1.8.3 Overall and Mounting Dimensions of Structures T10 to T12 (With Reactors)..... 23
1.9 Tightening Torque of Fasteners.................................................................................. 23
1.10 Consumption of Auxiliary Power.............................................................................. 24
2 Mechanical Installation......................................................................................................... 25
2.1 Storage and Transportation Precautions................................................................... 25
2.1.1 Storage ................................................................................................................. 25
2.1.2 Transportation..................................................................................................... 25
2.1.3 Acceptance........................................................................................................... 27
2.1.4 Unpacking ............................................................................................................ 27
2.2 Installation Environment ............................................................................................ 27
2.3 Installation Clearances and Direction........................................................................ 28
2.3.1 Installation Clearances ........................................................................................ 28
2.3.2 Installation Direction........................................................................................... 31
2.4 Backplate Mounting .................................................................................................... 31
2.5 Floor Mounting ............................................................................................................ 32

Contents
- 4 -
2.5.1 Heat Dissipation Requirements........................................................................... 32
2.5.2 Precautions for Installing AC Drives in Cabinets ................................................. 35
2.5.3 Procedure for Installing the AC Drive in a Cabinet .............................................. 37
2.5.4 Dimensions of the Mounting Bracket .................................................................. 43
2.6 Cover Removal and Mounting .................................................................................... 44
3 Electrical Installation ............................................................................................................ 47
3.1 Safety Instructions....................................................................................................... 48
3.1.1 Safety Precautions Before Installation................................................................ 48
3.1.2 Inspection ............................................................................................................ 48
3.1.3 General................................................................................................................. 48
3.1.4 Insulation Test...................................................................................................... 49
3.2 Wiring of the System.................................................................................................... 50
3.3 System Structure ......................................................................................................... 51
3.4 EMC-Compliant Cable Routing ................................................................................... 52
3.4.1 Basic rules for Cable Routing ............................................................................... 52
3.4.2 Requirements....................................................................................................... 52
3.4.3 Routing Suggestions ............................................................................................ 53
3.4.4 Connection of Shielded Power Cables................................................................. 57
3.5 Wring of the AC Drive................................................................................................... 57
3.5.1 Standard Wiring Diagram..................................................................................... 57
3.5.2 Main Circuit Terminals ......................................................................................... 60
3.5.3 Main Circuit Terminal Arrangement and Dimensions ......................................... 65
3.6 Wiring Checking........................................................................................................... 76
4 HCU Control Module ............................................................................................................. 77
4.1 Components of HCU Control Module......................................................................... 77
4.2 HCU Standard Terminals............................................................................................. 79
4.3 Dimensions and Installation Instructions.................................................................. 79
4.3.1 Installation Precautions....................................................................................... 79
4.3.2 Dimensions .......................................................................................................... 80
4.3.3 Space.................................................................................................................... 80
4.3.4 Installation Procedure ......................................................................................... 81
4.4 Function Module.......................................................................................................... 82
4.5 LED Indicators.............................................................................................................. 84
4.6 SD Memory Card .......................................................................................................... 84
4.7 Terminals...................................................................................................................... 85

Contents
- 5 -
4.8 HPCU Parallel Control Module.................................................................................... 89
4.8.1 Standard Terminals.............................................................................................. 89
4.8.2 LED Indicators ...................................................................................................... 90
4.8.3 Electrical Connection of HPCU ............................................................................ 91
4.9 Applications of HCU..................................................................................................... 91
4.9.1 SLOT Expansion.................................................................................................... 91
4.9.2 Temperature Measurement with AI and AO......................................................... 92
4.9.3 InoLink Communication Bus................................................................................ 93
4.9.4 Communication.................................................................................................... 94
5 Maintenance and Repair....................................................................................................... 96
5.1 Overview ...................................................................................................................... 96
5.2 Routine Maintenance .................................................................................................. 96
5.3 Periodic Inspection...................................................................................................... 97
5.3.1 Periodic Inspection Items .................................................................................... 97
5.3.2 Insulation Test on Main Circuit ............................................................................ 98
5.4 Replacement of Wear Parts......................................................................................... 98
5.4.1 Service Life of Wear Parts..................................................................................... 98
5.4.2 Number of Cooling Fans....................................................................................... 99
5.4.3 Replacing Cooling Fans........................................................................................ 99
5.4.4 Electrolytic Capacitor ........................................................................................ 105
5.5 Maintenance of the HCU Control Module and SOP-20-880 Operating Panel........ 105
5.5.1 Replacing the Memory Card............................................................................... 105
5.5.2 Replacing the Battery of the HCU Control Module............................................ 106
5.5.3 Replacing the Battery of the SOP-20-880 Operating Panel .............................. 108
6 Options................................................................................................................................. 110
6.1 Options....................................................................................................................... 110
6.2 Selection of Cables, Circuit Breakers, and Contactors ........................................... 111
6.3 Selection of Braking Components............................................................................ 113
6.3.1 Selection of Resistance of Braking Resistor ...................................................... 113
6.3.2 Selection of Power of Braking Resistor ............................................................. 113
6.3.3 Selection of Braking Unit ................................................................................... 114
6.3.4 Overall Dimensions and Mounting Dimensions of Braking Unit ....................... 116
6.4 Selection of Applicable Motor................................................................................... 118
6.5 Selection of the AC Input Reactor............................................................................. 119
6.6 Selection of the EMC Filter........................................................................................ 127

Contents
- 6 -
6.6.1 Standard EMC 󶍾lter ............................................................................................ 127
6.6.2 Simple EMC Input Filter...................................................................................... 134
6.6.3 Safety Capacitor and Magnetic Ring.................................................................. 135
6.7 Selection of the AC Output Reactor.......................................................................... 138
Appendix: Installation of the Sheet Metal Base and Side Entry Output Copper Busbar .. 147

Safety Instructions
- 7 -
Safety Instructions
Safety Disclaimer
1) Before installing, using, and maintaining this equipment, read the safety
information and precautions thoroughly, and comply with them during operations.
2) To ensure the safety of humans and equipment, follow the signs on the equipment
and all the safety instructions in this user guide.
3) "CAUTION", "WARNING", and "DANGER" items in the user guide indicate only part
of safety precautions that must be followed. They are supplements to the safety
instructions.
4) Use this equipment according to the designated environment requirements.
Damage caused by improper usage is not covered by warranty.
5) Inovance shall take no responsibility for any personal injuries or property damage
caused by improper usage.
Safety Levels and De󶍾nitions
DANGER
indicates that failure to comply with the notice will result in severe
personal injuries or even death.
WARNING
indicates that failure to comply with the notice may result in severe
personal injuries or even death.
CAUTION
indicates that failure to comply with the notice may result in minor
personal injuries or damage to the equipment.
Safety Instructions
Unpacking
CAUTION
◆Check whether the packing is intact and whether there is damage, water seepage,
damp, and deformation.
◆Unpack the package by following the package sequence. Do not hit the package with
force.
◆Check whether there are damage, rust, or injuries on the surface of the equipment or
equipment accessories.
◆Check whether the number of packing materials is consistent with the packing list.

Safety Instructions
- 8 -
WARNING
◆Do not install the equipment if you 󶍾nd damage, rust, or indications of use on the
equipment or accessories.
◆Do not install the equipment if you 󶍾nd water seepage, component missing, or damage
upon unpacking.
◆Do not install the equipment if you 󶍾nd the packing list does not conform to the
equipment you received.
Storage and Transportation
CAUTION
◆Store and transport this equipment based on the storage and transportation
requirements for humidity and temperature.
◆Avoid transporting the equipment in environments such as water splashing, rain,
direct sunlight, strong electric 󶍾eld, strong magnetic 󶍾eld, and strong vibration.
◆Avoid storing this equipment for more than three months. Long-term storage requires
stricter protection and necessary inspections.
◆Pack the equipment strictly before transportation. Use a sealed box for long-distance
transportation.
◆Use an even and 󶍿at truck to transport the equipment for long distance and ensure
that the installation pad is level. On snowy and rainy days, take proper measures to
proof rain and snow before transportation, such as, packing the equipment with felt
fabric.
◆Never transport this equipment with other equipment or materials that may harm or
have negative impacts on this equipment.
WARNING
◆Use professional loading and unloading equipment to carry large-scale or heavy
equipment.
◆When carrying this equipment with bare hands, hold the equipment casing 󶍾rmly with
care to prevent parts falling. Failure to comply may result in personal injuries.
◆Handle the equipment with care during transportation and mind your step to prevent
personal injuries or equipment damage.
◆Never stand or stay below the equipment when the equipment is lifted by hoisting
equipment. Ensure su󶎀cient tonnage ratings of the crane, cables, and hooks when
lifting the equipment.
Installation
WARNING
◆Thoroughly read the safety instructions and user guide before installation.
◆Do not modify this equipment.
◆Do not loosen 󶍾xed bolts (especially those marked in red) on equipment components.
◆Do not install this equipment in places with strong electric or magnetic 󶍾elds.
◆When this equipment is installed in a cabinet or 󶍾nal equipment, protection measures
such as a 󶍾reproof enclosure, electrical enclosure, or mechanical enclosure must be
provided. The IP rating must meet IEC standards and local laws and regulations.

Safety Instructions
- 9 -
DANGER
◆Equipment installation, wiring, maintenance, inspection, or parts replacement must
be performed only by professionals.
◆Installation, wiring, maintenance, inspection, or parts replacement must be performed
only by experienced personnel who have been trained with necessary electrical
information.
◆Installation personnel must be familiar with equipment installation requirements and
relevant technical materials.
◆Before installing equipment with strong electromagnetic interference, such as a
transformer, install an electromagnetic shielding device for this equipment to prevent
malfunctions.
Wiring
DANGER
◆Equipment installation, wiring, maintenance, inspection, or parts replacement must
be performed only by professionals.
◆Never perform wiring at power-on. Failure to comply will result in an electric shock.
◆Before wiring, cut o󶍽 all equipment power supplies. Wait at least 15 minutes before
further operations because residual voltage exists after power-o󶍽.
◆Always perform wiring after installation of the equipment is completed.
◆Make sure that the equipment is well grounded. Failure to comply will result in an
electric shock.
◆During wiring, follow the proper electrostatic discharge (ESD) procedures, and wear
an antistatic wrist strap. Failure to comply will result in damage to internal equipment
circuits.
WARNING
◆Never connect the power cable to output terminals of the equipment. Failure to
comply may cause equipment damage or even a 󶍾re.
◆When connecting a drive with the motor, make sure that the phase sequences of the
drive and motor terminals are consistent to prevent reverse motor rotation.
◆Wiring cables must meet diameter and shielding requirements. The shielding layer of
the shielded cable must be reliably grounded at one end.
◆After wiring, make sure that no screws are fallen and cables are exposed in the
equipment.

Safety Instructions
- 10 -
Power-on
DANGER
◆Before power-on, make sure that the equipment is installed properly with reliable
wiring and the motor can be restarted.
◆Before power-on, make sure that the power supply meets equipment requirements to
prevent equipment damage or even a 󶍾re.
◆At power-on, unexpected operations may be triggered on the equipment. Therefore,
stay away from the equipment.
◆After power-on, do not open the cabinet door and protective cover of the equipment.
Failure to comply will result in an electric shock.
◆Do not touch any wiring terminals at power-on. Failure to comply will result in an
electric shock.
◆Do not remove any part of the equipment at power-on. Failure to comply will result in
an electric shock.
Operating
DANGER
◆Do not touch any wiring terminals during operation. Failure to comply will result in an
electric shock.
◆Do not remove any part of the equipment during operation. Failure to comply will
result in an electric shock.
◆Do not touch the equipment shell, fan, or resistor for temperature detection. Failure to
comply will result in heat injuries.
◆Signal detection must be performed only by professionals during operation. Failure to
comply will result in personal injuries or equipment damage.
WARNING
◆Prevent metal or other objects from falling into the device during operation. Failure to
comply may result in equipment damage.
◆Do not start or stop the equipment using the contactor. Failure to comply may result in
equipment damage.
Maintenance
DANGER
◆Equipment installation, wiring, maintenance, inspection, or parts replacement must
be performed only by professionals.
◆Do not maintain the equipment at power-on. Failure to comply will result in an electric
shock.
◆Before maintenance, cut o󶍽 all equipment power supplies and wait at least 15
minutes.
WARNING
◆Perform daily and periodic inspection and maintenance for the equipment according
to maintenance requirements and keep a maintenance record.

Safety Instructions
- 11 -
Repairing
DANGER
◆Equipment installation, wiring, maintenance, inspection, or parts replacement must
be performed only by professionals.
◆Do not repair the equipment at power-on. Failure to comply will result in an electric
shock.
◆Before inspection and repair, cut o󶍽 all equipment power supplies and wait at least 15
minutes.
WARNING
◆Require repair services according to the product warranty agreement.
◆When the equipment is faulty or damaged, require professionals to perform
troubleshooting and repair by following repair instructions and keep a repair record.
◆Replace quick-wear parts of the equipment according to the replacement guide.
◆Do not operate damaged equipment. Failure to comply may result in worse damage.
◆After the equipment is replaced, perform wiring inspection and parameter settings
again.
Disposal
WARNING
◆Dispose of retired equipment by following local regulations or standards. Failure to
comply may result in property damage, personal injuries, or even death.
◆Recycle retired equipment by following industry waste disposal standards to avoid
environmental pollution.
Safety Signs
For safe equipment operation and maintenance, comply with safety signs on the
equipment, and do not damage or remove the safety labels. The following table
describes the safety labels.
Safety Label Description
WARNING
警告
• This equipment should be serviced
by qualified personnel only.
• Locate and disconnect all energy
sources.Wait 15 minutes then
operate.
• Observe the instructions described
in the instruction manual.
• 只有专业人士才能维护。
• 维护前确保切断所有电源，15分钟后
方可操作。
• 维护前请阅读维护说明书。
This equipment must only be serviced by quali󶍾ed
personnel.
Disconnect all energy sources and wait 15 minutes
before maintenance.
Read the maintenance instructions before
maintenance.

Safety Instructions
- 12 -
Safety Label Description
注意
为防止预充电电阻过热，两次
合闸的时间间隔不小于三分钟
To prevent overheating of the pre-charge resistor, the
interval between switch-ons must not be less than
three minutes!

1 Product Information
- 13 -
1 Product Information
1.1 Overview
The MD880 series AC drive (single drive system) is a general-purpose low-voltage AC
drive developed by Inovance. Featuring high power density, compact structure, and
high reliability, it can be used for V/F control, sensorless vector control (SVC), and
feedback vector control (FVC) of motors. It covers the power range of 5.5 kW to 450
kW, which is suitable for drive scenarios with papermaking equipment, rolling mills,
experimental stations, cranes, oil rigs, and mining machinery.
1.2 Nameplate and Model Number
MODEL: MD880-01S-0048-4-B
INPUT: 3PH AC 380 ~ 480V 49.5A 50/60Hz
OUTPUT: 3PH AC 0 ~ 480V 48A 0~300Hz 22kW
S/N: XXXXXXXXXXXXXXXX
Suzhou Inovance Technology Co., Ltd.
.PEFM
/BNFQMBUF
3BUFEJOQVU
3BUFEPVUQVU
4FSJBM/P
Figure 1-1 Nameplate
.% 4  
$PEF
4
1SPEVDU$BUFHPSZ
4JOHMFESJWF
$PEF
.%
1SPEVDU1MBUGPSN
.%TFSJFT"$ESJWF
$PEF

3BUFE$VSSFOU
"
$PEF


7PMUBHF$MBTT
5ISFFQIBTF7"$
5ISFFQIBTF7"$
#
4UBOEBSE0QUJPO
#VJMUJOCSBLJOHNPEVMF
8JUIPVUQVUSFBDUPS
$PEF
#
-
/POF
/POF
Figure 1-2 Model number

1 Product Information
- 14 -
1.3 Voltage and Power Rating
The grid voltage ranges from 3AC 380 V to 480 V. The following table lists the power
rating.
Table 1-1 Power rating of the MD880 series AC drive (single drive system)
Structure Model
MD880-01S-...
Rated
Current
(A)
Rated
Power
(kW)
Light-load
Current (A)
Light-load
Power (kW)
Heavy-load
Current (A)
Heavy-load
Power (kW)
T2 0012-4-B 12.0 5.5 12.0 5.5 9.0 3.7
0017-4-B 17.0 7.5 17.0 7.5 13.0 5.5
T3 0024-4-B 24.0 11.0 23.0 11.0 17.0 7.5
0033-4-B 33.0 15.0 32.0 15.0 25.0 11
T4 0038-4-B 38.0 18.5 37.0 18.5 32.0 15
T5 0048-4-B 48 22 45 22 37 18.5
0060-4-B 60 30 58 30 45 22
T6 0078-4-B 78 37 75 37 60 30
0094-4-B 94 45 91 45 75 37
T7 0116-4-B 116 55 112 55 91 45
0149-4-B 149 75 143 75 112 55
T8
0183-4-B 183 90 176 90 150 75
0217-4 217 110 210 110 176 90
0262-4 262 132 253 132 210 110
T9 0314-4 314 160 304 160 253 132
0383-4 383 200 370 200 304 160
T10 0441-4(L) 441 220 426 220 377 200
0481-4(L) 481 250 465 250 426 220
T11 0538-4(L) 538 280 520 280 465 250
0605-4(L) 605 315 584 315 520 280
T12
0673-4(L) 673 355 650 355 585 315
0751-4(L) 751 400 725 400 650 355
0849-4(L) 849 450 820 450 725 400

1 Product Information
- 15 -
1.4 Technical Data and Model Selection
Table 1-2 Selection of MD880 series AC drive (single drive system)
Structure Model
No Overload Light Overload Heavy Overload Weight
(kg)
Loss
(kW)
Overall
Dimensions
(W x L x D)
(mm)
Current
(A)
Power
(kW)
Current
(A)
Power
(kW)
Current
(A)
Power
(kW)
UN: three-phase 400 VAC (range: 380–480 V)
T2
MD880-01S-
0012-4-B 12.0 5.5 12.0 5.5 9.0 3.7
8.5
0.12 140 x 450 x
338
MD880-01S-
0017-4-B 17.0 7.5 17.0 7.5 13.0 5.5 0.195
T3
MD880-01S-
0024-4-B 24.0 11.0 23.0 11.0 17.0 7.5
11
0.262 150 x 470 x
348
MD880-01S-
0033-4-B 33.0 15.0 32.0 15.0 25.0 11 0.445
T4 MD880-01S-
0038-4-B 38.0 18.5 37.0 18.5 32.0 15 12.2 0.553 190 x 470 x 348
T5
MD880-01S-
0048-4-B 48 22 45 22 37 18.5
17.6
0.478 230 x 500 x
357
MD880-01S-
0060-4-B 60 30 58 30 45 22 0.551
T6
MD880-01S-
0078-4-B 78 37 75 37 60 30
27.6
0.694 265 x 510 x
387
MD880-01S-
0094-4-B 94 45 91 45 75 37 0.815
T7
MD880-01S-
0116-4-B 116 55 112 55 91 45
37.5
1.01 300 x 542 x
425
MD880-01S-
0149-4-B 149 75 143 75 112 55 1.21
T8
MD880-01S-
0183-4-B 183 90 176 90 150 75
54
1.57
338 x 580 x
465
MD880-
01S-0217-4 217 110 210 110 176 90 1.81
MD880-
01S-0262-4 262 132 253 132 210 110 2.14
T9
MD880-
01S-0314-4 314 160 304 160 253 132
87.5
2.85 400 x 915 x
470
MD880-
01S-0383-4 383 200 370 200 304 160 3.56
T10
MD880-
01S-0441-4 441 220 426 220 377 200
110
4.15 360 x 1134 x
500
MD880-
01S-0481-4 481 250 465 250 426 220 4.55
MD880-01S-
0441-4(-L) 441 220 426 220 377 200
160
4.15 360 x 1472 x
500
MD880-01S-
0481-4(-L) 481 250 465 250 426 220 4.55

1 Product Information
- 16 -
Structure Model
No Overload Light Overload Heavy Overload Weight
(kg)
Loss
(kW)
Overall
Dimensions
(W x L x D)
(mm)
Current
(A)
Power
(kW)
Current
(A)
Power
(kW)
Current
(A)
Power
(kW)
T11
MD880-
01S-0538-4 538 280 520 280 465 250
155
5.06 390 x 1284 x
545
MD880-
01S-0605-4 605 315 584 315 520 280 5.33
MD880-01S-
0538-4(-L) 538 280 520 280 465 250
215
5.06 390 x 1622 x
545
MD880-01S-
0605-4(-L) 605 315 584 315 520 280 5.33
T12
MD880-
01S-0673-4 673 355 650 355 585 315
185
5.69
400 x 1403 x
545
MD880-
01S-0751-4 751 400 725 400 650 355 6.31
MD880-
01S-0849-4 849 450 820 450 725 400 6.91
MD880-01S-
0673-4(-L) 673 355 650 355 585 315
245
5.69
400 x 1735 x
545
MD880-01S-
0751-4-L 751 400 725 400 650 355 6.31
MD880-01S-
0849-4-L 849 450 820 450 725 400 6.91
1.5 Technical Data
Table 1-3 Technical data of MD880 series AC drive (single drive system)
Item Speci󶍾cation
Basic
performance
Rated input
voltage and
frequency
400 V system: 380–480 VAC, 50/60 Hz
Allowed voltage
󶍿uctuation -15% to +10%; actual allowed range: 323 VAC to 528 VAC
Output voltage 400 V system: 0–480 VAC
Output frequency 0–300 Hz
Overload capacity Light overload: 110% for 1 minute every 5 minutes
Heavy overload: 150% for 1 minute every 5 minutes
E󶎀ciency More than 98%

1 Product Information
- 17 -
Item Speci󶍾cation
Control
characteristics
Motor control
mode
V/F control
Sensorless vector control (SVC)
Feedback vector control (FVC)
Carrier frequency
400 V system:
5.5–37 kW: 4 kHz by default;
45–55 kW: 3.2 kHz by default;
75 kW: 2.5 kHz by default;
90–450 kW: 2 kHz by default
Speed range
V/F control: 1:50
SVC: 1:200
FVC: 1:1000
Speed control
accuracy
SVC: ±10%Fsl
FVC: ±0.01%
Torque response SVC: ≤ 5 ms
FVC: ≤ 5 ms
Startup torque SVC: 0.5 Hz/150%
FVC: 0 Hz/200%
Mechanical
data
Antivibration
performance
Compliant with GB/T 2423.10-2008
Frequency: 5–9 Hz, displacement: 7 mm
Frequency: 9–200 Hz, acceleration rate: 5.9 m/s2
Scanning speed: 1 oct/min
Security
performance Compliant with EN 61800-5-1
Cooling mode Forced air cooling (AF), compliant with EN 60146
Protections
Phase loss
protection
Input phase loss protection
Output phase loss protection
Overvoltage
protection
The AC drive stops when the DC voltage of the main circuit is
above 800 V.
Undervoltage
protection
The AC drive stops when the DC voltage of the main circuit is
below 350 V.
Overtemperature
protection
Protection is triggered when the inverter bridge gets
overheated.
Overload
protection
The AC drive stops after running at 150% of rated heavy-load
current for 60 seconds.
The AC drive stops after running at 110% of rated light-load
current for 60 seconds.
Overcurrent
protection
The AC drive stops when 2.5 times of rated heavy-load
current of the AC drive is exceeded.
Brake protection Braking resistor short-circuit protection (unavailable for
models of 18.5 kW and below)
Short-circuit
protection
Output phase-to-phase short-circuit protection
Output phase-to-ground short-circuit protection

1 Product Information
- 18 -
Item Speci󶍾cation
Environment
Requirements
Installation
location
Free from direct sunlight, dust, corrosive gas, combustible
gas, oil smoke, vapor, drip, or salt indoor
Altitude
Below 1000 m, derated by 1% per 100 m increase when the
altitude is above 1000 m
Maximum altitude: 3000 m
Operating ambient
temperature
Ambient temperature: -10℃ to +40℃ , derated by 1.5% per
1° C increase when the ambient temperature exceeds 40℃
Maximum temperature: 50° C
Storage
temperature -20℃ to +60℃
Humidity Less than 95% RH, non-condensing
Vibration Lower than 5.9m/s2(0.6g)
Pollution degree PD2
Power system TT/TN
IT (VDR and EMC screws removed)
Overvoltage
category OVC III
IP rating Structures T2 to T9: IP20
Structures T10 to T12: IP00
1.6 Derating
1) Ambient temperature and derating
When the temperature falls within 40℃ to 50℃ , the rated output current must be
derated by 1.5% for every 1° C increase. The output current can be calculated by
multiplying the current value given in the rating table by the derating factor (k):
L

 ǫ ǫ5

Figure 1-3 Ambient temperature and derating
2) Altitude and derating
When the altitude is 1000 m to 3000 m above the sea level, for every 100 m increase in
altitude, the output current of the AC drive must be derated by 1%.

1 Product Information
- 19 -
L


 NN
"4-
Figure 1-4 Altitude and derating
3) Carrier frequency and derating
Table 1-4 Carrier frequency and derating
Model
MD880-
01S-...
Rated
Power Carrier Frequency (kHz)
P (kW) 1.2 1.5 2 2.5 3.2 4 5 6 7 8
0012-4-B 5.5 100.00% 100.00% 100.00% 100.00% 100.00% 100.00% 89.56% 80.86% 73.49% 67.24%
0017-4-B 7.5 100.00% 100.00% 100.00% 100.00% 100.00% 100.00% 89.33% 80.42% 72.97% 66.50%
0024-4-B 11 100.00% 100.00% 100.00% 100.00% 100.00% 100.00% 91.04% 83.15% 76.32% 70.36%
0033-4-B 15 100.00% 100.00% 100.00% 100.00% 100.00% 100.00% 91.54% 84.01% 77.27% 71.24%
0038-4-B 18.5 100.00% 100.00% 100.00% 100.00% 100.00% 100.00% 91.29% 83.42% 76.55% 70.43%
0048-4-B 22 100.00% 100.00% 100.00% 100.00% 100.00% 100.00% 93.65% 87.90% 82.65% 77.90%
0060-4-B 30 100.00% 100.00% 100.00% 100.00% 100.00% 100.00% 93.45% 87.60% 82.20% 77.30%
0078-4-B 37 100.00% 100.00% 100.00% 100.00% 100.00% 100.00% 90.60% 82.40% 74.85% 68.30%
0094-4-B 45 100.00% 100.00% 100.00% 100.00% 100.00% 94.40% 86.50% 79.40% 72.85% 67.10%
0116-4-B 55 100.00% 100.00% 100.00% 100.00% 100.00% 94.00% 86.15% 79.20% 73.35% 68.10%
0149-4-B 75 100.00% 100.00% 100.00% 100.00% 95.28% 88.90% 81.75% 75.50% 70.00% 65.20%
0183-4-B 90 100.00% 100.00% 100.00% 93.85% 85.72% 77.50% ― ― ― ―
0217-4 110 100.00% 100.00% 100.00% 93.10% 84.00% 74.90% ― ― ― ―
0262-4 132 100.00% 100.00% 100.00% 93.93% 85.90% 77.70% ― ― ― ―
0314-4 160 100.00% 100.00% 100.00% 94.83% 87.98% 80.80% ― ― ― ―
0383-4 200 100.00% 100.00% 100.00% 94.45% 87.08% 79.70% ― ― ― ―
0441-4-(L) 220 100.00% 100.00% 100.00% 92.50% 82.80% 73.10% ― ― ― ―
0481-4-(L) 250 100.00% 100.00% 100.00% 93.10% 84.16% 75.10% ― ― ― ―
0538-4-(L) 280 100.00% 100.00% 100.00% 93.40% 84.80% 76.20% ― ― ― ―
0605-4-(L) 315 100.00% 100.00% 100.00% 93.85% 85.80% 77.80% ― ― ― ―
0673-4-(L) 355 100.00% 100.00% 100.00% 93.78% 85.46% 77.00% ― ― ― ―
0751-4-(L) 400 100.00% 100.00% 100.00% 94.23% 86.62% 78.70% ― ― ― ―
0849-4-(L) 450 100.00% 100.00% 100.00% 93.55% 85.16% 76.80% ― ― ― ―