Acustek SWORD-24s Quick start guide

SWORD-24s
Extendable Handheld Non-linear Junction Detector
Operational Manual
FORENSICSSURVEILLANCECOUNTERMEASURES

Harmonic test samples (2nd, 3rd)
Adaptor
Cable
SWORD-24s
Non-linear Junction Detector
Headphone
Non-linear Junction Detector
Hand-held telescopic pole
SWORD-24s
Extendable Handheld
Non-linear Junction
Detector

PART 01

Antenna: Transmit and receive test signals.
Headend: Display device status, such as
battery level, transmit power value, second
harmonic and third harmonic signal strength;
Central control keys: Including power button,
transmitting power adjustment button,
receiving sensitivity adjustment button, sound
adjustment and vibration adjustment button.
Headphone jack: Supporting 3.5mm headphone.
Speaker: Support sound warning.
Type-c connector: AC-DC adapter for charging.
Lanyard: Suspendable and non-slip.
Schematic Diagram of Product Structure
SWORD-24s
Non-linear Junction Detector

SWORD-24s Can be widely used in government, public security, prison, judicial, military,
education examination and personal privacy protection, etc.
BUSINESS SECURITY Enterprise and commercial secret protection: Detect unauthorized
electronic devices hidden in important conference rooms or confidential offices of the
company, such as eavesdroppers, mobile phones and devices containing SIM cards, etc..
PUBLIC SECURITY AND SWAT EXPLOSIVE DISPOSAL Detect electronic detonation devices
and remote controls in dangerous areas.
PERSONAL PRIVACY PROTECTION Detect equipment for secretly photographing and
recording hidden in houses, hotels and other places, such as recording pens, cameras, etc..
Use Scenarios
PART 02

SWORD-24s
Non-linear Junction Detector
Operation guide
1. Central Control Key Operation Area
Power on button：
On/off button, press and hold for 2 seconds to switch on, press and hold for 2
seconds to switch off, with indicator.
Tx button：
Transmit power adjustment button, divided into high, medium and low, with
indicator light.
Rx button：
Receive sensitivity adjustment button, divided into high, medium and low, with
indicator light.
Sound button：
Button for adjusting the alarm sound level, divided into high, medium and low, with
indicator light.
Vibrate button：
Turn on/off the vibration function

PART 03
Transmit Power Strength Indicator
Indicates the received second harmonic signal strength
Indicate the received third harmonic signal strength
When a suspicious electronic device is detected in the target area, the second
harmonic signal strength is significantly stronger than the third harmonic signal
strength and the electronics icon is displayed on the screen.
2. Charging instructions：
The device supports charging using the C-type connector. The power
button indicator will always be orange when charging, and if the unit
is switched on, the battery icon will be displayed on the screen as
charging.

SWORD-24s
Non-linear Junction Detector
3. Interface
The screen interface mainly displays the battery level, the alarm mode, the transmit power level
and the strength of the received second and third harmonic signals.
The detection process and results are as follows:
Battery status display Vibration alarm mode
Audio alarm mode indicator Headphone mode indicator
Indicates that an electronic
product has been detected
Indicates that the device is in
the process of detection

PART 03
Product working frequency band:
Frequency range：
Receiving 2nd~3rd harmonic range:
Pulse mode transmit power (max):
Receive sensitivity:
Receive dynamic adjustable range:
Battery working time:
Battery type:
Interactive interface:
Detection distance:
Detect penetrability:
Product dimension:
Transit case dimension:
Product weight:
Working temperature:
Working humidity :
2.400GHz
2.404GHz - 2.472GHz
4.808GHz-4.944GHz， 7.212GHz-7.416GHz
0-1W
≤-125dBm
30dBm
4.5H
Lithium battery
LED displays received harmonic signal intensity
Audio prompts are supported and headphones can be connected
Supporting vibration tips
>6M，C-class product complying with GA1236-2015 standard
It can penetrate 370mm brick wall and meet the grade C product specified in
GA1236-2015 standard
370mm x 96mm x 38.5mm)±5mm，
(355mm x 295mm x 165mm)±10mm
≤0.52kg±0.05kg
-20，°C~55， °C
Less than 93%, no condensate
General Spcifications

FAQ
Q: What can I do if it does not start when I press the power button?
A: Normal boost requires long press on the power button for more than 3s; Long press on the power
button for 3s and still can't turn on. It may be that the battery has run out of power. You need to
connect the power adapter for charging.
Q: How to detect the target electronic products at a long distance?
A: 1. The machine can be set to silent mode, you need to exit silent mode to generate audible alarm;
2. Turn up the sound;
3. Check that the horn is not blocked.
Q: When will the machine automatically shut down?
A: 1. It will automatically switch off after 5 seconds when the head is folded;
2. It machine will automatically switch off if it detects no movement for 5 minutes.;
3. It machine will automatically switch off when the battery power is below 10%.
Q: The box may not be opened or deformed after long-term transportation or storage. How to deal
with it?
A: This situation is caused by the change in air pressure difference between the inside and outside of
the box. Rotate the pressure reducing valve so that the air pressure inside and outside is not even,
open the box and tighten the pressure reducing valve to avoid water leakage.