ADA INSTRUMENTS GroundDrill - 8 User manual
Operating manual
Ground drill
Model: GroundDrill - 8
Manufacturer Address: WWW. ADAINSTRUMENTS.COM
GroundDrill-8
1. Introduction ........................................................................................................................................................................................3
2. Features..............................................................................................................................................................................................3
5. The selection of appropriate auger....................................................................................................................................................6
6. Starting engine...................................................................................................................................................................................6
8. Spark plug .........................................................................................................................................................................................7
9. Gear ...................................................................................................................................................................................................8
12. Long term storage............................................................................................................................................................................8
13. Maintenance.....................................................................................................................................................................................9
Appendix 1.
Appendix 2.
Table of contents
MEASUREMENT FOUNDATION
GroundDrill-8
3
1. Introduction
2. Features
1. Handle
2. Reduction gear
3. Fuel tank
5. Return starter
7. Spark plug cap
9. Input drive
4
56
7
8
9
3
2
1
10
MEASUREMENT FOUNDATION
GroundDrill-8
Engine
3
25 :1
Precautions
MEASUREMENT FOUNDATION
GroundDrill-8
5
prevent fire.
10. Replace auger if there are cracks and damages on it.
15. Before starting ensure that auger is not locked.
at great speed.
19. Move the instrument during operation at no load.
MEASUREMENT FOUNDATION
GroundDrill-8
6
The selection of appropriate auger
Fuel
Starting engine
NOTE!
Drilling
MEASUREMENT FOUNDATION
GroundDrill-8
7
1. Carburetor trouble
2. Start troubles
Spark plug
MEASUREMENT FOUNDATION
GroundDrill-8
8
Gear
100h of operation.
Long term storage
Remove all fuel from the fuel tank. Start the engine and let it run until it stops. Repair all damages that appeared during operation.
engine.
MEASUREMENT FOUNDATION
GroundDrill-8
9
Maintenance
DAILY MAINTENANCE
Check the centering.
Check starter and pullback spring.
MONTHLY MAINTENANCE
Clean outer surface of carburettor and area around it.
Clean ventilator and area around it.
MEASUREMENT FOUNDATION
GroundDrill-8
10
Warranty
-
Exceptions from responsibility
explained in the users’ manual.
-
WARRANTY DOESN’T EXTEND TO FOLLOWING CASES:
regular maintenance of the instrument.
WARRANTY CARD
Name and model of the product ________________________________________________
Serial number ________________date of sale_______________________
Name of commercial organization _____________________stamp of commercial organization
Warranty period for the instrument explotation is 12 months after the date of original retail purchase.
During this warranty period the owner of the product has the right for free repair of his instrument in case of manufacturing defects.
occur in the result of the instrument outage.
The product is received in the state of operability, without any visible damages, in full completeness. It is tested in my presence. I have no
complaints to the product quality. I am familiar with the conditions of qarranty service and i agree.
purchaser signature _______________________________
Before operating you should read service instruction!
If you have any questions about the warranty service and technical support contact seller of this product
__________________________________________________________________________
__________________________________________________________________________
name and model of the instrument
Corresponds to ______________________________________________________________
designation of standard and technical requirements
Data of issue _______________________________________________________________
Stamp of quality control department
Price
Sold ___________________________________ Date of sale ______________________
name of commercial establishment
GroundDrill-8
MEASUREMENT FOUNDATION
16
GroundDrill-8
4
56
7
8
9
3
2
1
10
MEASUREMENT FOUNDATION
17
GroundDrill-8
3
25 :1
MEASUREMENT FOUNDATION
18
GroundDrill-8
MEASUREMENT FOUNDATION
19
GroundDrill-8
MEASUREMENT FOUNDATION
20
GroundDrill-8
Table of contents
Other ADA INSTRUMENTS Drill manuals
ADA INSTRUMENTS
ADA INSTRUMENTS GroundDrill-2 User manual
ADA INSTRUMENTS
ADA INSTRUMENTS GroundDrill - 14 User manual
ADA INSTRUMENTS
ADA INSTRUMENTS GroundDrill - 12 User manual
ADA INSTRUMENTS
ADA INSTRUMENTS GroundDrill 5 User manual
ADA INSTRUMENTS
ADA INSTRUMENTS GroundDrill-9 User manual
ADA INSTRUMENTS
ADA INSTRUMENTS GroundDrill - 1 User manual
ADA INSTRUMENTS
ADA INSTRUMENTS GroundDrill-9 User manual
