ADA INSTRUMENTS GroundDrill-9 User manual

Operating manual
Ground drill
Model: GroundDrill - 9
Manufacturer Address: WWW. ADAINSTRUMENTS.COM

GroundDrill - 9
1. Introduction ........................................................................................................................................................................................3
2. Features..............................................................................................................................................................................................3
5. The selection of appropriate auger....................................................................................................................................................6
6. Assembling .........................................................................................................................................................................................6
9. Gear ...................................................................................................................................................................................................9
12. Long term storage............................................................................................................................................................................10
13. Maintenance.....................................................................................................................................................................................10
Appendix 1.
Appendix 2.
Table of contents

- 9
MEASUREMENT FOUNDATION
GroundDrill - 9- 9
3
1. Introduction
2. Features
1. Handle
2. Reduction gear
5. Return starter
11. Lubrication hole
12. Input drive
1
2
3
5 6 7
9
10
11
12

MEASUREMENT FOUNDATION
GroundDrill - 9
Engine
3
25 :1
Precautions

- 9
MEASUREMENT FOUNDATION
GroundDrill - 9- 9
5
prevent fire.
at great speed.
19. Move the instrument during operation at no load.

MEASUREMENT FOUNDATION
GroundDrill - 9
6
The selection of appropriate auger
Pic.1 Pic.2
Assembling (Pic.1)
Fuel

- 9
MEASUREMENT FOUNDATION
GroundDrill - 9- 9
7
Starting engine
NOTE!
Drilling
instrument.
Pic.3
Pic.4

MEASUREMENT FOUNDATION
GroundDrill - 9
Pic.5
Pic.6
1. Carburetor trouble
2. Start troubles
Spark plug (Pic.10)
Pic.7

- 9
MEASUREMENT FOUNDATION
GroundDrill - 9- 9
9
Gear (pic. 11)
-
and remove exhaust carbon from exhaust port or entrance
Pic. 9
Pic. 10
Pic. 11

MEASUREMENT FOUNDATION
GroundDrill - 9
10
Pic. 12
Pic. 13
Long term storage
Repair all damages that appeared during operation.
-
Maintenance
Clean outer surface of carburettor and area around it.
Clean ventilator and area around it.

- 9
MEASUREMENT FOUNDATION
GroundDrill - 9- 9
11
Warranty
presumed to be defects resulting from misuse or abuse.
Exceptions from responsibility
explained in the users’ manual.
-

WARRANTY DOESN’T EXTEND TO FOLLOWING CASES:
-
instruction.
-

WARRANTY CARD
Name and model of the product ________________________________________________
Serial number ________________date of sale_______________________
Name of commercial organization _____________________stamp of commercial organization
Warranty period for the instrument explotation is 24 months after the date of original retail purchase. It extends to the equipment, imported
During this warranty period the owner of the product has the right for free repair of his instrument in case of manufacturing defects.
occur in the result of the instrument outage.
The product is received in the state of operability, without any visible damages, in full completeness. It is tested in my presence. I have no
complaints to the product quality. I am familiar with the conditions of qarranty service and i agree.
purchaser signature _______________________________
Before operating you should read service instruction!
If you have any questions about the warranty service and technical support contact seller of this product

__________________________________________________________________________
__________________________________________________________________________
name and model of the instrument
Corresponds to ______________________________________________________________
designation of standard and technical requirements
Data of issue _______________________________________________________________
Stamp of quality control department
Price
Sold ___________________________________ Date of sale ______________________
name of commercial establishment


GroundDrill - 9

- 9
MEASUREMENT FOUNDATION
17
GroundDrill - 9- 9
1
2
3
5 6 7
9
10
11
12

MEASUREMENT FOUNDATION
GroundDrill - 9
3
25 :1

- 9
MEASUREMENT FOUNDATION
19
GroundDrill - 9- 9

MEASUREMENT FOUNDATION
GroundDrill - 9
20
Other manuals for GroundDrill-9
1
Table of contents
Other ADA INSTRUMENTS Drill manuals

ADA INSTRUMENTS
ADA INSTRUMENTS GroundDrill - 12 User manual

ADA INSTRUMENTS
ADA INSTRUMENTS GroundDrill-9 User manual

ADA INSTRUMENTS
ADA INSTRUMENTS GroundDrill 5 User manual

ADA INSTRUMENTS
ADA INSTRUMENTS GroundDrill-2 User manual

ADA INSTRUMENTS
ADA INSTRUMENTS GroundDrill - 1 User manual

ADA INSTRUMENTS
ADA INSTRUMENTS GroundDrill - 14 User manual

ADA INSTRUMENTS
ADA INSTRUMENTS GroundDrill - 8 User manual