Adam Equipment AIP User manual
© Adam Equipment Company 2018
Adam Equipment
AIP PRINTER
© Adam Equipment Company 2018
Easy Reference:
Serial number of the printer:
Model of the product linked to this
printer:
Software revision number of the
product linked to the printer:
Serial number of the product linked to
the printer:
Date of Purchase:
Name of the supplier and place:
© Adam Equipment Company 2018 1
CONTENTS
P.N. 1.12.0.0.14641, Revision A, June 2018
1.0INTRODUCTION........................................................................................2
1.2OVERVIEW..............................................................................................2
2.0SETTING UP..............................................................................................3
3.0TECHNICAL SPECIFICATIONS.............................................................4
4.0 PACKAGE CONTENTS.................................................................................5
4.1 PACKING LIST............................................................................................5
5.0 PRINTER INSTALLATION AND OPERATION...........................................6
5.1 PRINTER CONNECTION...........................................................................6
5.2 INK RIBBON CARTRIDGE INSTALLATION...........................................6
5.3 PAPER ROLL INSTALLATION..................................................................7
6.0 OPERATION....................................................................................................8
6.1 AUTO-SET....................................................................................................8
6.2 PARAMETER SETTINGS..........................................................................8
6.3 OPERATION METHOD...............................................................................9
7.0 TROUBLE SHOOTING................................................................................10
7.1MAINTENANCE....................................................................................11
WARRANTY INFORMATION.............................................................................12
© Adam Equipment Company 2018 2
1.0 INTRODUCTION
The high speed AIP printer is a compact and concise dot matrix printer from Adam
Equipment that fulfills data printing needs through simple and easy operation.
1.1 FEATURES
High-speed impact dot matrix printer with a durable design making it suitable for
long-term storage.
The AIP is easy to use with only an On/Off switch and a paper feed button.
The AIP is supplied with a power supply adapter, to charge the internal
rechargeable battery operation.
Auto-set: Communication parameters can be detected, identified and set
automatically including baud rate, data bits, stop bits, etc.
Supplied with RS-232 interface and USB port which allows for connection between
printer, computer and weighing device to update firmware and set parameters.
The set-up software provided is compatible with Windows operating systems such
as Windows XP, Windows 7, Windows 8 and Windows 10.
Compatible with Windows virtual keyboard function.
Supports multiple national languages and can easily be selected.
Complies with EU RoHS, FCC, UL requirements and CE Certification.
1.2 OVERVIEW
1. RS232 Interface 2. USB Port 3. Power jack
123
© Adam Equipment Company 2018 3
2.0 SETTING UP
Avoid extremes of temperature. Do not place in direct sunlight or
near air conditioning vents.
Make sure both the scale and the printing accessory are located
on a strong table and free from vibration.
Avoid unstable power sources. Do not use near large users of
electricity such as welding equipment or large motors. Do not
mix batteries and use only the factory approved power adapter
supplied with the machine and the printing accessory. Do not
use batteries and the DC adapter at the same time.
Keep free from vibration. Do not place near heavy or vibrating
machinery.
Avoid high humidity that might cause condensation. Keep away
from direct contact with water. Do not spray or immerse the
scales or the printing accessory in water.
Do not place near open windows, air-conditioning vents or fans
that may cause a draft and unstable readings.
Avoid operating in high static areas, or weighing high static
materials, such as plastics or powders, as this may damage
electronics and affect measurements. Use grounding mats or
bonding straps to reduce potential.
© Adam Equipment Company 2018 4
3.0 TECHNICAL SPECIFICATIONS
Model AIP
Printing method 8 pin shuttle impact dot matrix
Printing speed 1.7 lines/sec (approx)
Printing digits 24 digits / line or 40 digits / line, 5 x 7 dot matrix
Character size Approx. 1.7 mm (W) x 2.6 mm (H)
Printer paper Normal paper, 57mm width, 50mm in diameter
Reliability (MCBF) 1,000,000 lines
Operating temperature 5°C to 45°C
41°F to 133°F
Interface Dsub-9 pin (RS-232C), male
Communication
Note:
Data bits + Parity + Stop
bits must >=9, here:
Parity None = 0
Parity Odd = 1
Oarity Even = 1
Baud: 600, 1200, 2400, 4800, 9600, 14.4k, 19,2k, 38.4k, 115.2k
Data: 7,8
Parity: None, Odd, Even
Stop bits: 1, 2
Delimiter (terminate char): CR, LF, CR+LF
Handshake: None, DTR/CTS, Xon/Xoff
Power Supply DC 12V/1500mA
Polarity:
4 x N:-MH AA1500mAh 1.2V
Printer regulations CE(LVD+EMC), RoHS, WEEE
AC adapter
regulations CE, GS, UL/CUL, CC, TUV Mark
Keys 1 key
Cables Two cables: DB9F- DB9F cross, DB9M none-cross
© Adam Equipment Company 2018 5
4.0 PACKAGE CONTENTS
Accessory packing specification
4.1 PACKING LIST
Item Part Number Quantity
AIP Printer 1.12.0.0.14641 1
AC adapter (12V, 12.0A) 3.12.4.0.14658 1
Printer roll, 57mm 3.12.6.0.14659 2
Ink ribbon cartridge
(installed in printer mechanism)
3.12.6.0.14661 1
USB cable 3.07.4.0.10267 1
RS 232 cable 9 pin, female 3.12.4.0.14662 1
RS 232 cable 9 pin, male 3.12.4.0.14663 1
Instruction manual CD N/A 1
Software CD N/A 1
© Adam Equipment Company 2018 6
5.0 PRINTER INSTALLATION AND OPERATION
5.1 PRINTER CONNECTION
Please connect the cable as shown.
Make sure the AIP and HOST machine are powered off and connect the data
communication cable to the SERIAL PORT.
Connect the power adapter to the AIP and electricity supply.
Turn on the balance, then turn the AIP on using the ON/OFF switch located on the
left-hand side of the printer (Switch in ‘I’ position)
5.2 INK RIBBON CARTRIDGE INSTALLATION
The ink cartridge is installed as below:
Replace the ink cartridge when printing becomes unclear or faint.
(1) Lift the paper cover as demonstrated.
(2) Place the left side of the ink cartridge on the gear
shaft on the left side of the printer mechanism and
push the right side down.
(3) Rotate the knob clockwise and press the “LF” button
to flatten and tighten the ribbon as and when
necessary.
(4)
Close the paper cover and the installation is complete
© Adam Equipment Company 2018 7
5.3 PAPER ROLL INSTALLATION
The paper is fitted as below:
(1) Lift the paper cover
(2) Insert the paper shaft into the center of the paper roll as shown:
(3) Place the paper roll into the space provided in the following way:
(a) Correct direction (b) Wrong direction
(4) Insert the end of the printer paper into the printer mechanism as shown:
(5) Press the ‘LF’ key whilst feeding the paper through the mechanism until the
paper comes out.
Damaged or un-specified paper and ribbon should
not be used to avoid possible damage of the printer.
© Adam Equipment Company 2018 8
6.0 OPERATION
POWER light: Power light to indicate POWER is supplied to the printer
LF key: Hold key to continuously feed paper through
6.1 AUTO-SET
This function will automatically detect and set the communication parameters to make the
printer compatible with any balance.
(1) Connect the AIP to your balance using the relevant cable provided
(2) Power ON the AIP whilst holding down the ‘LF’ key
(3) The following contents should be printed:
Once printed release the ‘LF’ key.
(4) Press the relevant transfer key (e.g PRINT) on balance. Once the dataTransfer
is detected analysis will begin automatically and print.
(5) Press the ‘LF’ key to accept the printed data to return to normal working status
6.2 PARAMETER SETTINGS
Parameters can be set through computer software and can run on most windows
operating systems, requirements include:
Windows XP and above
More than 1M disk space and
More than 1M free memory
© Adam Equipment Company 2018 9
6.3 OPERATION METHOD
(1) Disconnect the connection between AIP and AC adapter
(2) Connect the AIP to your PC using the USB cable provided
(3) Start up the Easy Setup software
‘Read…OK Printer is connected’ will be displayed if connection is successful
(4) Select Baud rate, Data Bits, Parity, Stop Bits, Handshake, Terminator, Language
as required and click ‘Set to Printer’ to confirm settings.
(5) Close the program and unplug the USB cable.
(6) A self-check report can be printed in the occasion of any fault in diagnosis. Turn
off the printer and turn on the AIP whilst holding down the ‘LF’ key.
© Adam Equipment Company 2018 10
7.0 TROUBLE SHOOTING
Symptom Cause Remedy
The power light does not
light up when the power
switch is turned ON
An incorrect power adapter is
being used
Use the correct one as supplied
AC adapter failure Replace the adapter or request service.
Printer failure Request service.
Letters printed out are
even but too light
Ribbon is at the end of its
lifetime
Install a new ribbon
Letters printed out are
uneven
Incorrectly installed ribbon Re-install the ribbon
Paper stuck in printer Paper jam Carefully remove the paper and re-install
Sounds like it’s printing
but nothing is printed out
Incorrectly installed ribbon or
no ribbon fitted
Re-install the ribbon
Printing is unclear Paper jam Refer to above content to solve paper jam
The printing paper is installed
in the wrong direction
Re-install the printing paper referring to the
Manual for correct installation details
Incompatible printing paper is
being used
Replace the printing paper with the correct
type
The paper shaft is missing Install the paper shaft into the paper roll
Printing mechanism feeder
fault
Request service
Faulty ribbon Replace the ribbon
Printing mechanism is
damaged, possibly due to an
incorrect type of ribbon, or
dusty environment.
Request service
Partial content is missed
in printing
Ribbon creased Pull the ribbon out and then turn the gear
to wind it back in so that the ribbon is not
creased then re-install the ribbon.
Printer does not print
when print key is pressed
Incorrect cable connection
between printer and balance
Re-install the cable referring to Manual
Balance is not in transferable
status
Set the balance in transferable status
Incompatible
communication parameter
Use “Auto-Set” function in printer to check
and set communication parameter
Printer cannot receive any
information using “Auto-Set”
function
1. Output interface is disabled: enable it.
2. Cable fault: replace the cable
3. Printer or balance fault: request service.
© Adam Equipment Company 2018 11
7.1 MAINTENANCE
Remove all power cables and data cables before cleaning
When cleaning the AIP ensure no liquid gets into it
Use a soft dry cloth to wipe the printer after cleaning
Keep hands dry before touching the adapter
Store printer in a dry environment
Keep the AIP in its packaging when it is not in use for prolonged periods of time.
To avoid damage, it is strongly recommended to use the ink ribbon and other
consumables supplied by Adam Equipment.
Turn off the AIP power supply after use and remove the adapter if the AIP is not
used for a prolonged period of time.
© Adam Equipment Company 2018 12
WARRANTY INFORMATION
Adam Equipment offers Limited Warranty (Parts and Labour) for the
components failed due to defects in materials or workmanship. Warranty
starts from the date of delivery.
During the warranty period, should any repairs be necessary, the purchaser
must inform its supplier or Adam Equipment Company. The company or its
authorized Technician reserves the right to repair or replace the components
at any of its workshops depending on the severity of the problems. However,
any freight involved in sending the faulty units or parts to the service center
should be borne by the purchaser.
The warranty will cease to operate if the equipment is not returned in the
original packaging and with correct documentation for a claim to be
processed. All claims are at the sole discretion of Adam Equipment.
This warranty does not cover equipment where defects or poor performance
is due to misuse, accidental damage, exposure to radioactive or corrosive
materials, negligence, faulty installation, unauthorized modifications or
attempted repair or failure to observe the requirements and
recommendations as given in this User Manual. Additionally rechargeable
batteries (where supplied) are not covered under warranty.
Repairs carried out under the warranty does not extend the warranty period.
Components removed during the warranty repairs become the company
property.
The statutory right of the purchaser is not affected by this warranty. The
terms of this warranty is governed by the UK law. For complete details on
Warranty Information, see the terms and conditions of sale available on our
web-site.
© Adam Equipment Company 2018 13
WEEE 2012/19/EU
Thisdevicemaynotbedisposedofindomesticwaste.ThisalsoappliestocountriesoutsidetheEU,pertheir
specificrequirements.Disposalofbatteries(iffitted)mustconformtolocallawsandrestrictions.
Cetappareilnepeutêtreéliminéaveclesdéchetsménagers.L’éliminationdelabatteriedoitêtreeffectuée
conformémentauxloisetrestrictionslocales.
DiesesGerätnichtmitdemHausmüllentsorgt.
Dispositivonopuedeserdesechadojuntoconlosresiduosdomésticos
Dispositivononpuòesseresmaltitoneirifiutidomestici.
FCC / IC CLASS A DIGITAL DEVICE EMC VERIFICATION STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC rules and Canadian ICES-003/NMB-003 regulation. These
limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Adam Equipment products have been tested with, and are always supplied
with mains power adapters which meet all legal requirements for the
intended country or region of operation, including electrical safety,
interference and energy efficiency. As we often update adapter products to
meet changing legislation it is not possible to refer to the exact model in
this manual. Please contact us if you need specifications or safety
information for your particular item. Do not attempt to connect or use an
adapter not supplied by us.
© Adam Equipment Company 2018 14
ADAM EQUIPMENT is an ISO 9001:2008 certified global company with more than 40 years’ experience in the
production and sale of electronic weighing equipment.
Adam products are predominantly designed for the Laboratory, Educational, Health and Fitness, Retail and
Industrial Segments. The product range can be described as follows:
-Analytical and Precision Laboratory Balances
-Compact and Portable Balances
-High Capacity Balances
-Moisture analysers / balances
-Mechanical Scales
-Counting Scales
-Digital Weighing/Check-weighing Scales
-High performance Platform Scales
-Crane scales
-Mechanical and Digital Electronic Health and Fitness Scales
-Retail Scales for Price computing
For a complete listing of all Adam products visit our website at www.adamequipment.com
Adam Equipment Co. Ltd.
Maidstone Road, Kingston
Milton Keynes
MK10 0BD
UK
Phone:+44 (0)1908 274545
Fax: +44 (0)1908 641339
e-mail:
Adam Equipment Inc.
1, Fox Hollow Rd.
06478
USA
Phone: +1 203 790 4774
Fax: +1 203 792 3406
e-mail:
AE Adam GmbH.
Instenkamp 4
D-24242 Felde
Germany
Phone +49 (0)4340 40300 0
Fax: +49 (0)4340 40300 20
e-mail:
Adam Equipment S.A. (Pty) Ltd.
7 Megawatt Road,
Spartan EXT 22
Kempton Park,
Johannesburg,
Republic of South Africa
Phone +27 (0)11 974 9745
Fax: +27 (0)11 392 2587
e-mail:
Adam Equipment (S.E. ASIA)
PTY Ltd
70 Miguel Road
Bibra Lake
Perth
WA 6163
Western Australia
Phone: +61 (0) 8 6461 6236
Fax +61 (0) 8 9456 4462
e-mail:
Adam Equipment (Wuhan) Co. Ltd.
A Building East Jianhua
Private Industrial Park
Zhuanyang Avenue
Wuhan Economic &
Technological Development
Zone
430056 Wuhan
P.R.China
Phone: + 86 (27) 59420391
Fax + 86 (27) 59420388
e-mail:
info@adamequipment.com.cn
© Copyright by Adam Equipment Co. All rights reserved. No part of this publication may be reprinted or
translated in any form or by any means without the prior permission of Adam Equipment.
Adam Equipment reserves the right to make changes to the technology, features, specifications and design of
the equipment without notice.
All information contained within this publication is to the best of our knowledge timely, complete and accurate
when issued. However, we are not responsible for misinterpretations which may result from the reading of
this material.
The latest version of this publication can be found on our Website.
www.adamequipment.com
Table of contents
Other Adam Equipment Printer manuals
