adapt ASENTO User manual

1
ASENTO

2
USER GUIDE
To get into your vehicle
Your new ASENTO assists your transfer into your vehicle.
Follow the next few steps:
Open the door fold down the transfer board.
Position yourself and your wheelchair so as to transfer as safely as possible onto the ASENTO. Be sure to put the brakes
on your wheelchair to prevent it from moving.
Once you have transferred onto the ASENTO, make sure you lower the security arm in place, around you. This security
arm was designed to help you keep your balance while the ASENTO is ascending or descending.

3
USER GUIDE (CONTINUED)
To get into your vehicle
Pick up the hand held pendant, press and hold the UP button so that the ASENTO brings you up to the height of your
vehicle’s seat.
Once the ASENTO has reached the desired height that will offer you the best position to transfer, release the UP button.
You can then transfer over into the vehicle. At any time during the motions you can release the UP button and the
ASENTO will stop, allowing you to reposition. Once you are ready to continue, just press and hold the UP button to
resume your ascent.
After completing your transfer, press and hold the DOWN button to lower the ASENTO back to the floor of your vehicle.
Once the ASENTO has reached its lowest point, release the button and stow the security arm first, followed by the
transfer board, by folding it upwards. You can now close your vehicle’s door.

4
USER GUIDE (CONTINUED)
To get out of your vehicle
Follow the next few steps:
Remove your seat belt and open the door.
Fold down the transfer board and the security arm.
Pick up the hand held pendant.
Press and hold the UP button until the ASENTO has reached the desired height for you to transfer onto it and then
release the button.

5
USER GUIDE (CONTINUED)
To get out of your vehicle
Transfer onto the ASENTO and use the security arm for balance. Press and hold the DOWN button until the ASENTO
has reached the desired height that will offer you the best position to transfer and release the DOWN button.
Stow the hand held pendant.
Stow the security arm before attempting to transfer off the ASENTO.
Transfer off the ASENTO and fold the transfer board back up in place and then close the vehicle’s door.
WARNINGS
WHEN CLOSING THE DOOR, BE SURE THAT THE TRANSFER BOARD IS FOLDED UP IN POSITION.
THE TRANSFER BOARD MUST BE AT ITS LOWEST POINT POSSIBLE AND FOLDED UP BEFORE CLOSING THE DOOR.
NEVER TRY TO OPERATE THE ASENTO WHILE THE VEHICLE DOOR IS CLOSED OR IF THE VEHICLE IS IN MOTION.
WARNING: This product can expose you to chemicals including benzene, which is known to the State of California
to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

6
3 YEAR LIMITED WARRANTY
ASENTO
Adapt Solutions # 1 Ltd. (Adapt Solutions), warrants to the original purchaser of an ASENTO that the equipment is free from
defects in material and workmanship for a period of three years from date of purchase.
During the first year of the warranty, Adapt Solutions will supply the replacement parts as well as a pre-set monetary amount
(determined by Adapt Solutions) for the repair if a defect in materiel or workmanship is discovered. After the initial year of this
warranty, only parts and components are covered. This warranty does not cover labour and other services after the initial
year. Freight and other related repair charges will be the responsibility of the original purchaser.
The only remedy for a defect in one of Adapt Solutions products (LINK; XL-BASE; XL-SEAT; HI-LIFT; SPEEDY-LIFT; XL-
BOARD; POWER-PULL; ASENTO) shall be the repair or the replacement, at the discretion of Adapt Solutions, of the
defective part or component. If repair or replacement is not commercially practical or cannot be timely made, Adapt
Solutions may decide to refund the purchase price of the equipment instead of repairing or replacing the original equipment.
In no event shall Adapt Solutions be responsible for indirect, incidental or consequential damages, whether such damages
arise from claims based on contract, warranty, tort (including negligence), strict liability or product liability.
All implied warranties, including any warranty of merchantability or fitness for a particular purpose, are limited in their duration
to the length of the warranty stated above for the affected component.
This warranty is to the original purchaser only, and excludes product damage due to installation error, product misuse,
product abuse, accidents, physical damage, damage in shipment, modifications not made by Adapt Solutions, or repairs
undertaken by anyone other than authorized distributors.

7
TO OBTAIN WARRANTY PARTS OR REIMBURSEMENT
You must follow these procedures:
1. Obtain warranty authorization by calling your local Adapt Solutions dealer or Adapt Solutions directly at 1-866-641-0419.
2. Return the faulty Adapt Solutions component/equipment, freight prepaid, to the address provided by your Adapt
Solutions dealer or Adapt Solutions with proof of purchase indicating the date purchased.
Adapt Solutions will pay for shipping back to the purchaser within the continental United States and Canada if a defect in
materiel or workmanship is discovered. Return freight and repair charges will be the responsibility of the purchaser if the
problem is not covered by warranty.
This warranty gives you specific legal rights, and you may also have other rights that vary from state to state/ province to
province. Adapt Solutions specifically does not authorize any person to extend the time or scope of this warranty.
For further information regarding this limited warranty, please contact us by calling 1-866-641-0419 or by writing at the following
address:
Adapt Solutions / Warranty Department
145 Damase-Breton
St-Lambert-de-Lauzon, Québec
G0S 2W0 Canada

8
WARRANTY REGISTRATION
Adapt Solutions #1 Ltd located in St-Lambert-de-Lauzon, Québec, Canada, warrants this product to be free from any
manufacturer’s defect and workmanship for a period of three years from the date of purchase. This product has to be
installed by an authorized dealer and has to be operated properly to be warranted. This warranty is limited to the original
purchaser and does not cover defects on the vehicle. The warranty registration must be completed and returned within 30
days of purchase. This warranty does not cover abnormal wear or damages resulting from an accident, misuse, neglect of
if the product has been altered in any way or aspect. Defective parts must be returned by an authorised dealer, who will
have received a prior return authorization from Adapt Solutions #1 Ltd. All warranted parts shall be sent to Adapt Solutions
#1 Ltd prepaid. Parts will be replaced or repaired at Adapt Solutions #1 Ltd.
Date installed:______________________________________
Dealer:_____________________________________________
Dealer signature:____________________________________
TO KEEP FOR YOUR RECORDS
(Place serial number here)