ADDAC System ADDAC200PI User manual

July.2019
ADDAC200PI Assembly Guide
ADDAC SYSTEM page 2

ADDAC SYSTEM page 3
STEP 1:
Locate and solder the 4 capacitors like shown below..
ADDAC200PI Assembly Guide

ADDAC SYSTEM page 4
STEP 3:
Locate and solder the 2x5 boxed pinheader like shown below.
ADDAC200PI Assembly Guide

ADDAC SYSTEM
STEP 6:
Locate the remaining pinheaders, place and solder them like shown below.
page 5
ADDAC200PI Assembly Guide

ADDAC SYSTEM page 6
STEP 8:
Locate all jacks and place them like shown below.
ADDAC200PI Assembly Guide

STEP 11:
Place the smaller pcb on the panel, tighten the nuts and solder their pads.
ADDAC SYSTEM page 7
ADDAC200PI Assembly Guide

ADDAC SYSTEM page 8
STEP 13:
Attach the bigger pcb tighten the nuts and solder the last pads.
ADDAC200PI Assembly Guide

ADDAC SYSTEM page 15
Congratulations you’re done!
Happy Patching!!
ADDAC200PI Assembly Guide

For feedback, comments or problems please contact us at:
[email protected]
ADDAC200PI ASSEMBLY GUIDE
July.2019Revision.01