Addictive Desert Designs AC2302601NA User manual

TOOLS REQUIRED
SKILL LEVEL
TIME REQUIRED
(Allen Wrench) 5/64, 5/32
(Wrench) 11/32
Ratchet
21+/FORD BRONCO
DASH MOUNT
AC2302601NA
-Easy/Intermediate
INCLUDED IN KIT
1- Flat Head Bolt (1/4-20 x 3/4)
2- Nylon Lock Nut (#8-32)
2- Button Head Bolt (#8-32 X 3/4)
1- Dual Output USB Charger
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
INSTALLATION guide
-BEFORE YOU INSTALL THIS KIT-
Read and understand all instructions, warnings,
cautions, & notes contained in this installation
instruction guide. Consult your vehicle owner’s manual
for proper disconnection of electrical and lifting of
vehicle if required for installation of this product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not feel
that you are capable of performing this install please
take this product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service [phone]
Addictive desert designs is not responsible for any
bodily injury or harm to you or your vehicle as a result
of an improper install.
Proper installation of this kit required knowledge of
the factory recommended procedures for removal and
installation of original equipment components.
We recommend that the factory shop manual and
any special tools needed to service your vehicle be
on hand during the installation. Installation of this kit
without proper knowledge of the factory recommended
procedures may affect the performance of these
components and the safety of the vehicle.
Inspect all contents of this package to make sure
product is not damaged and all installation hardware
has been included. If parts are missing from kit, please
be prepared to provide the following information:
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
*ALWAYS WEAR EYE PROTECTION
WHEN OPERATING POWER TOOLS*
- 30 minutes

DASH MOUNT
21+/FORD BRONCO
Page 2 | Addictive Desert Designs
INSTALLATION guide
STEP 1
Locate the accessory hole located on top of the dash.

DASH MOUNT
21+/FORD BRONCO
Page 3 | Addictive Desert Designs
INSTALLATION guide
STEP 2
Install the dual output USB charger with the provided #8-32 button head bolt and nylon lock nuts
with a (5/64 allen) and a (11/32 wrench).

DASH MOUNT
21+/FORD BRONCO
Page 4 | Addictive Desert Designs
INSTALLATION guide
STEP 3
Wire the USB charging port to the battery as shown in the diagram below. (Professional wiring is
recommended)

DASH MOUNT
21+/FORD BRONCO
Page 5 | Addictive Desert Designs
INSTALLATION guide
STEP 4
Install the 1/4-20 x 3/4 Flat Head Bolt using a (5/32 allen).

For Additional Support or Technical Questions,
Please Call 480-671-0820 or
Email [email protected]
This product is protected by one or more U.S. patents
www.addictivedesertdesigns.com/patents
Page 6 | Addictive Desert Designs
DASH MOUNT
21+/FORD BRONCO
INSTALLATION guide
Stand back and enjoy your new ADD Dash Mount.
Check and re-tighten, if needed, all mounting bolts after 100 miles and periodically thereafter.
STEP 5