Adobe PHOTOSHOP ELEMENTS 2.0 - LESSONS FOR EDUCATORS (ST. PATRICK S DAY... User manual

Adobe Education
Adobe Photoshop Elements 2.0
Lessons for Educators
®
®
St. Patrick’s Day Project

Adobe Photoshop Elements 2.0 ST. PATRICK’S DAY PROJECT
Photoshop Elements 2.0: St. Patrick’s Day Project 1
St. Patrick’s Day
This project will teach Adobe® Photoshop® Elements painting techniques using shapes and styles to create
the look of 3D.
For this project, you will create a landscape to be printed as a greeting card. All areas of the landscape will
be created directly in Photoshop Elements. Photoshop Elements features will be used to create the illusion
of 3D paper cutouts from all the landscape elements.
This project will demonstrate the many ways to create the effects of craft techniques using Photoshop
Elements alone. These techniques can be applied to many types of projects created with both shapes
and text.
Materials
This project works best when printed on paper heavier than 24 pounds in weight.

Adobe Photoshop Elements 2.0 ST. PATRICK’S DAY PROJECT
Photoshop Elements 2.0: St. Patrick’s Day Project 2
Preparation
File management. Create a new work folder on your desktop. Name this folder with a unique name that you
will recognize. Always keep all image files for a single project in their own unique work folder.
In Photoshop Elements
Refer to the illustration of the toolbox for steps requiring the use of any of the Photoshop Elements tools.
Figure 2
Figure 1

Adobe Photoshop Elements 2.0 ST. PATRICK’S DAY PROJECT
Photoshop Elements 2.0: St. Patrick’s Day Project 3
1. Create a new Photoshop Elements master file:
(Figure 3)
From the menu bar, choose File > New. In the new
file window set the new file size to Width 8 inches,
Height 10 inches, 150 pixels/inch (this is a good pixel
range for printing on a digital printer), and RGB
mode (Figure 1).
Save the file. To do this: From the menu bar, choose
File > Save As and browse the dialog box for your
folder. Open the folder, name your master file a
short, easy-to-remember name, and click on Save.
(Make sure that the name in the title bar is the name of
your work folder.)
2. Creating the Sky.
From the toolbox, select the rectangular marquee
tool.
3. In the options bar click the small arrow to the right
of the Style selector and choose Fixed Size. Type 5
inches for height and 8 inches for width. Using the
rectangular marquee tool, click on the bottom
right corner of the image area to select the bottom
half of the canvas (Figure 4). (“Canvas” is another
name for the entire image area in a Photoshop
Elements file.)
Figure 3
Figure 4

Adobe Photoshop Elements 2.0 ST. PATRICK’S DAY PROJECT
Photoshop Elements 2.0: St. Patrick’s Day Project 4
4. In the palette well, click on the Swatches
tab. Select a sky blue color (Figure 5).
5. From the toolbox, select the paint bucket
tool. Click inside the rectangular selection
and it will fill with the blue color. The reason
you place the sky in the bottom portion of
the canvas is that the card will be folded in
half. Folding will place the sky in its proper
position at the top of the landscape.
6. Creating clouds in the sky. From the
toolbox, select the custom shapes tool. In
the toolbox, note that there are five
sections to the layout. Each section is
designated with a line. The shape tools
and other painting tools are located in
the second section from the top. The
shapes tool is the first tool on the left
side of this selection. It can initially
appear as a line, rectangle, ellipse, or
several other shapes. To locate all the
shapes in the shapes tool submenu, click
and hold on the tiny triangle in the
bottom right corner of the shapes Icon. A
new shape palette will roll out. Click on
the small right-pointing arrow to the
right of the custom shapes tool.
7. In the options bar, click and hold on the
small, downward pointing arrow to the
right of the word Shape and the shape
icon to open the Shape submenu. A new
Shapes palette will open. Hold on the
small right-pointing arrow to the right of
this palette. A long submenu will drop
down. Scroll down and select the Nature
option. Another Shape palette will open (Figure 6).
Figure 5
Figure 6

Adobe Photoshop Elements 2.0 ST. PATRICK’S DAY PROJECT
Photoshop Elements 2.0: St. Patrick’s Day Project 5
8. In the palette well, click on the Swatches tab and select
white or whatever color you want to make the clouds. On
the image area click and drag two or three clouds onto the
sky.
9. To make the cloud shapes look three-dimensional, do this:
From the Layer Styles palette, choose Drop Shadow, and
Soft Edge (Figure 7).
10. To create the hills, do this: Select the custom shapes tool. In
the options, click and hold on the small, downward-
pointing arrow to the right of the word shape and the shape
icon to open the Shape submenu. A new Shapes palette
will open. Select the Filled Half Cloud silhouette which is the
second from the right in the second row (Figure 8).
11. In the palette well, click on the Swatches tab. Select a pastel
green color from the second row.
Figure 7
Figure 8

Adobe Photoshop Elements 2.0 ST. PATRICK’S DAY PROJECT
Photoshop Elements 2.0: St. Patrick’s Day Project 6
12. To automatically paint hills, click the left bottom of the image area
and drag horizontally across the screen to the right, ending up
outside the image area. You will see a rolling green hill appear
(Figure 9).
13. In the palette well, click on the Swatches tab. Select a medium
green color.
14. To automatically paint a second hill, click again at the bottom to
the right of the first hill. Drag horizontally across the screen to the
right, ending up outside the image area. You will see another
lighter green hill appear (Figure 10).
15. In the palette well, click on the Swatches tab. Select a deep green
color.
16. To automatically paint a third hill, repeat step 10. You will see a
dark green hill appear. Create a series of progressively darker hills.
Working from left to right and then back again to cover the middle
of the canvas. You can resize and reposition each hill by selecting
the move tool at the top right corner of the toolbox. Then click and
drag on the colored area to reposition it. Notice that the higher the
hills, the more the 3D effects will show (Figure 11).
Figure 9
Figure 11Figure 10

Adobe Photoshop Elements 2.0 ST. PATRICK’S DAY PROJECT
Photoshop Elements 2.0: St. Patrick’s Day Project 7
17. Note that as you create each hill, a new layer is added to your
Layers palette. These layers will be titled shape 1, shape 2,
shape 3, etc. It is important to remember which layer is
associated with which hill as you will be working on
individual layers to create a 3D effect. If you want to re-label
each layer to distinguish them more easily, double-click on
the layer title and type in a new title in the dialog Box that
opens.
18. Creating a 3D effect on the hills.
In the Layers palette, click on the right-most hill layer to
activate it. In the Layer palette click the Layer Styles tab. Click
and hold on the small down-pointing arrow in the top left
corner to see the submenu. Click on Drop Shadows. Select
the Soft Edge shadow. A shadow will appear to the right of
the hill. Select each hill in the Layers palette and apply the
Soft Edge shadow to see your hills look as though they are
standing away from the page (Figure 12).
19. Creating the Castle.
In the palette well, click on the Swatches tab, and select a
medium gray. In the options bar, select the rectangle-shape
tool, which is second from the left next to the arrow (Figure 13).
20. A little right of center on top of the highest hill, click and drag a tall, narrow rectangle. This will be the first
tower of your castle (Figure 14).
Figure 12
Figure 14
Figure 13

Adobe Photoshop Elements 2.0 ST. PATRICK’S DAY PROJECT
Photoshop Elements 2.0: St. Patrick’s Day Project 8
21. Making new towers.
To build the castle quickly, you will copy this tower. To do
this: In the Layers palette, drag the layer title of your first gray
rectangle to the small middle icon at the bottom of the
Layers palette. This icon is between the black and white circle
and the trash can. This will make a copy of the first tower.
You can select this layer in the Layer palette to activate the
new tower (Figure 15).
22. To move and resize the towers.
From the toolbox, select the Move tool. In the Layer palette
click on the new tower layer, then move to that shape on the
image area and use the corner and center boxes as well as
the arrow keys on the keyboard to resize and reposition the
tower. Repeat step 21 to make enough towers for the castle
(Figure 16).
23. Changing the colors.
In the palette well, select the Swatches and select a
different gray color. In the toolbox, select the Paint Bucket
tool. Activate a tower layer in the Layers palette. Click on the
Active tower on the canvas to change the colors of the
towers. For the roof tops of the Castle, click on the Swatches
tab, and select a gold color. Note: if you cannot change the
color, check to see if there is a chain icon next to that layer.
If there is that layer has become locked. To unlock, click and
hold on the small right-pointing arrow at the top right of
the Layers palette then scroll down to Simplify Layer.
Pats 12
Figure 15
Figure 15
Figure 16

Adobe Photoshop Elements 2.0 ST. PATRICK’S DAY PROJECT
Photoshop Elements 2.0: St. Patrick’s Day Project 9
24. Putting roof tops on the castle towers.
With the custom shape tool selected, go to the
Shortcuts Bar and select the polygon tool. This is the tool
between the Line and the ellipse. In the Sides box enter
3 to make a triangle. Position the cursor at the center of
the top of a tower, click and drag straight upward to
make a triangular roof top (Figure 17).
25. To resize and move the triangles.
Using the arrow tools on the keyboard, nudge the roof
tops to the proper position on the towers. From the
toolbox, select the move tool. In the Layers palette click
on the new roof layer, then move to that shape on the
image area and use the corner and center boxes as well
as the arrow keys on the keyboard to resize and
reposition the tower. To make a taller tower, move the
cursor upward in the triangle selection box till the
pointer changes into a double-ended arrow. Drag
upward to make a taller roof top. If the roof does not fit
on top of your tower, you can resize it with the corner
and side handles.
26. Creating more roof tops.
In the Layers palette, drag the roof layer to the Make
New Layer icon at the bottom of the palette (see step 20
and Figure 18 for details).
Figure 15
Figure 17
Figure 18