Adtec DTA-3150 User manual

benefits
Digital television service operators wishing to
re-distribute MPEG or DVB based services as next
generation IPTV based services will find the DTA ideal.
Available inputs on the DTA-3150 model include two ASI,
two satellite and two DVB-T terrestrial. Inputs options
for the DTA-3154 include two ASI and four DVB-T
terrestrial. All Adtec DTA models have GIGE output,
optional ASI output and support multicast and unicast
configurations including SPTS/UDP or RTP, MPTS/UPD or
RTP. Additionally they support MPEG and DVB tables and
conditional access capabilities including decryption and
encryption. The DTA 315x is ideal
for next generation television
networks focused on IPTV.
applications
• Telco IPTV / Broadband IPTV: Cost
effective and reliable delivery of video, audio
and data services to an unlimited number of
consumer set top boxes or PC/MAC clients on
an IP network.
• Satellite (DVB-S) Digital TV: Turnaround
of digital satellite programming to IPTV or ASI,
without the need for external QPSK receivers.
(DTA 3150)
• Terrestrial (DVB-T) Digital TV: Turnaround
of digital terrestrial programming to IPTV or
ASI, without the need for external COFDM
receivers. (DTA-3150, 3154)
• IP over MPEG 2 Transport: Delivery of IP
data services to set top boxes or computers
over MPEG-2 transport using IP encapsulation.
• Conditional Access: The DTA-3150 and DTA-3154
provide DVB-CSA and AES conditional access decryption
and encryption capabilities. DVB-CSA decryption is
facilitated through two rear mounted CACI slots and
encryption is available as fixed key BISS or Simulcrypt
based interfaces compatible with most major DVB-CSA CAS
vendors. AES decryption and encryption includes support
for Adtec’s OST and Verimatrix VCAS for set top and
computer-based decryption.
• Integrated DVB-S and DVB-T Tuners: The
DTA-3150 features two integrated QPSK satellite tuners for
receiving programming delivered via DVB-S and two
integrated COFDM tuners for receiving terrestrial DVB-T.
The DTA-3154 features four integrated COFDM tuners with
the two ASI inputs.
• Aggregation of ASI SPTS or MPTS services:
The DTA-3150 and DTA-3154 offer two DVB-ASI input ports
enabling it to aggregate locally encoded SPTS or re-muxed
MPTS from another router or receiver.
• IPTV: Gigabit Ethernet distribution of digital television
services includes SPTS over UDP or RTP for Set Top and
computer decoding and MPTS over UDP or RTP for bundled
distribution.
• ASI: An optional 3 port mirrored ASI output interface
provides integration with traditional distribution methods
including Cable, Satellite, and Terrestrial.
• Flexible Configuration & Control: Controlling and
configuring the DTA-3150 and DTA-3154 is easy. Whether using the
integrated front panel keypad with LCD, Terminal or remote Web
page interface, they respond rapidly and reliably to the desires of
the operator.
• IPTV Electronic Program Guide: Adtec’s edjeGuide
Server integrates seamlessly with our DTA routers to deliver an
interactive electronic program guide to IP based Set Tops or a
PC/MAC edjePlayer and includes support for many IP based Set
Tops. Adtec’s edjeVOD enterpise VOD server, an optional service
installed on the edjeGuide server, is ideal for small stream count
implementations like medical, educational or hospitality. Interfaces
to external VOD servers facilitate large stream count VOD
requirements including direct to home Telco TV.
Adtec Digital US Sales: 615.256.6619 International Sales 904.394.0389 www.adtecinc.com
09.25.2006
TATA
availability
models
IP ASI
DTA-3150
DTA-3150-ASI
outputs
DTA-3154
DTA-3154-ASI
ASI DVB-S
inputs
DVB-T
2
2
2
2
2
2
0
0
2
2
4
4
T
315x Digital Turn Around Router
The DTA-315x series is specifically designed for turning
MPEG or DVB based digital television services via ASI,
Satellite, or Terrestrial distribution into IP
distribution. It is ideal for Telco TV and
Broadband TV systems utilizing MPEG 2
or MPEG 4 AVC (H.264).
TATA
NEW

Power GigE
IEEE 1394 FireWire
Terminal Interface Fast Ethernet Interface
ASI Redundancy
Inputs
ASI Inputs QPSK Inputs Terrestrial Cable Inputs
Redundancy Tally ASI Outputs
USB 2.0 Interface
GPIO or Serial Port
CACI Slots
The DTA-3154 does not
have QPSK Input ports.
They are replaced with 2
additional DVB-T inputs.
Front Panel
• 8 Button Tactile Raised keypad:
Mode, Select, Enter, Escape, Up, Down, Left, Right
• Blue Translucent LCD
20 character by 2 row
• Front Panel Host LED’s
Power, Alarm, Link, Busy, MPE
• Front Panel LEDs
Out (Alarm, ASI, GigE, CA)
DTA-3150 Specific
In (2 - ASI Ports, DVB-S 3 Port and Lock , DVB-S
4 Port and Lock, DVB-T 5 Port and Lock, DVB-T 6
Port and Lock)
DTA-3154 Specific
In (2 - ASI Ports, DVB-T 3 Port and Lock , DVB-T
4 Port and Lock, DVB-T 5 Port and Lock, DVB-T 6
Port and Lock)
ASI Inputs
• ASI x 2 (BNC)
• 188 or 204 Byte mode
• SPTS or MPTS
• 211 Mbps per input
• 256 PIDs per input
• Fill scrubbing on input
• Input Modes
Auto (Remap all services)
Manual (Add/Drop/Remap PID/Services)
Pass (Pass all services as-is)
MHP Injector
SI Injector
QPSK Inputs (Satellite)
3150 (2) 3154 (0)
• QPSK
• Antenna Input
L-Band Input 950 – 2150 MHz
• Input Level
-65 dB to –25 dB
• LNB Power
Automatic Polarity Sensing
(Horizontal - 14V-Vertical - 18V)
Automatic Over and Under Current Protection
22 KHz Tone
(High Frequency Block Up-convert)
DiSEqC
• Symbol Rate
2 to 45 MS/s
• Forward Error Correction (Physical)
DVB Viterbi FEC
Automatic Sensing
1/2, 2/3, 3/4, 5/6, 7/8
Reed Solomon (16 bits)
• 188 or 204 Byte mode
• SPTS or MPTS
• 72 Mbps per input
Note: Specifications subject to change without written notice
• 256 PIDs per input
• Fill scrubbing on input
• Modes
Same as ASI
Redundancy
• 1+1 IP and ASI
• ASI x 2 (BNC inputs for auto switch)
• No external controller required
DVB-T Inputs (Terrestrial)
3150 (2) 3154 (4)
• COFDM x 2 (Type F Female)
• Antenna Input
UHF: 470 MHz to 862 MHz
VHF: 174 MHz to 230 MHz
• Input Level
-88 dB to –20 dB
• Channel Bandwidth
6, 7 or 8 MHz
• Channel Assignment
CCIR Channel and +/- 166.666 KHz offset
• Functional
2k and 8k carrier non hierarchical and hierarchical
(DVB-T and DTG compliant)
• Modulation Modes
QPSK, 16 QAM, 64 QAM
• Guard Interval Modes
1/32, 1/16, 1/8, ¼ active symbol duration
Automatic Sensing
• Forward Error Correction (Physical)
DVB Viterbi FEC
Automatic Sensing
1/2, 2/3, 3/4, 5/6, 7/8
• 188 or 204 Byte mode
• SPTS or MPTS
• 72 Mbps per input
• 256 PIDs per input
• Fill scrubbing on input
• Modes
Same as ASI
Outputs
• Gigabit Ethernet
SPTS over UDP or RTP
MPTS over UDP or RTP
150 Mbs
Very low jitter
Output Options
• ASI (model is DTA 3150-ASI)
ASI Mirrored (BNC x 3)
Byte or Burst Mode
54 Mbs Byte
211 Mbs Burst
Jitter less than 150 (nS)
Table Processing
• No Tables
• MPEG Tables
PAT
CAT (if CA is enabled)
PMT
• DVB Tables (Add/Drop/Remap DVB Services)
NIT
SDT
TDT/TOT
EIT
• ATSC Tables (Add/Drop/Remap ATSC Services)
VCT (Cable or Terrestrial)
MGT
STT
RRT
EIT (1-4)
• DCII Tables (Add/Drop/Remap Digicypher services
to DVB or ATSC)
IP Data Encapsulation (ISO 13818-6 MPE)
• EN 301 192 Encapsulation of IP Datagrams over
• Unicast and Multicast Support
• 32 Routes
• 32 PIDs
IP Data de-capsulation (ISO 13818-6 MPE)
• EN 301 192 de-capsulation of IP Datagrams
• 16 PiDs
• 300 Mbs
Conditional Access Encryption
• DVB-Common Scrambling Algorithm (CSA)
• DVB Simulcrypt TS 103 197 v 1.2.1 and SCTE
OpenCAS™ DVS-278 compliant
• FIPS 140-2 hardware based random number
generator (RNG)
• Advanced Encryption Standard (AES)
Adtec Open Secure Transport (OST)
IP based encryption for use with Adtec IRDs
IP Set Top and Computer compatibility
• Current 3rd Party CA Vendors include:
• CSA:
Irdeto
Conax
EuroCAS
KeyFly
Xcrypt
• AES:
Verimatrix
Host Platform
• PowerPC
• Adtec optimized Linux Kernel
• 10/100 Ethernet RJ-45 (Eth 0)
• 10/100/1000 Ethernet RJ-45 (Eth 1)
• Serial Port (RJ-48)
• USB 2.0 (2)
• IEEE 1394 (Firewire)
• N.C. / N.O. Tally Interface
• XML Configuration
• HTTP, FTP, Telnet, IP Logging, DHCP,
(XCP Adtec encrypted layer 3 protocol)
Power
• 70-240 VAC switching power supply
• 50/60 Hertz
• Rated at 94 Watts return nominal usage 20 watts
Physical
• 19” wide, 1.75” tall, 16” deep, (483 x 44.5 x 406 mm)
• 1 Rack Unit
• Weight 13lbs.
Environmental
• Active cooling (Push pull Fans)
• Operating: 0 to +50 degrees C
• Storage: -30 to +65 degrees C
• Less than 70% RH
• Non-Condensing
• DTA 3150 or 3154 Digital Turn Around Router
• Accessory Kit: One 3 pin alarm tally plug,
four rack mount screws with washers.
• Communication Kit to connect the unit to
an external computer via RS232 (Adtec
PN: comkit2). The kit includes an RJ-48
line to a DB-9F connector.
• Adtec Startup CD
• DTA Operations Manual
• Ethernet Cable (10 foot long) Used for
LAN/WAN or Terminal connectivity
• US Power Cord (6 foot long)