Advanced Bionics Naida CI User manual

Naida CI Connect
QUICK GUIDE
On your device (e.g. phone), ensure that
Bluetooth is enabled, and then search for
Bluetooth-enabled devices in the connectivity
setting menu.
Attach Naida CI Connect to your sound
processor. You now have 3 minutes to pair
your Naida CI Connect with your device.
Your device shows a list of Bluetooth-
enabled devices. Select the ‘Naida CI
Connect’ from the list to pair the devices. A
beep confirms successful pairing.
DEVICE DESCRPITION
The Naida CI Connect allows streaming of calls or music via Bluetooth® directly to your Naida CI Q90
sound processor. With built-in microphones that pick up your own voice for phone calls, you can enjoy
hands free calling. Naida CI Connect works with Android™, iOS, and any feature phone, along with all
Bluetooth®-enabled tablets, laptops, and MP3 players.
Configuration of Naida CI Q90 in
SoundWave 3.2
TIP
Naida CI Connect requires the PowerCel 170
battery
INITIAL PAIRING TO A BLUETOOTH®-
ENABLED DEVICE
PHONE CALLS
TIP
A phone call always has highest priority and will mute
music or audio streaming. A Bluetooth music stream
has priority over TV Connector streaming. To switch
back to the TV Connector streaming, simply stop the
music streaming on your smartphone or other audio
streaming device.
1
2
TIP
Once paired to your device, Naida CI Connect will
automatically connect again. Naida CI Connect
can be connected to one device at a time.
Default program: Ensure RogerReady is enabled
in slot 1. This ensures that Naida CI Connect will
automatically switch into streaming mode any time
a streaming signal is received. The sound
processor will automatically revert back to the full
microphone 20 seconds after streaming has ended.
AUX only program: Should the patient wish to hear
no environmental sound from the Naida CI Q90
microphones, then a manual Connect/Roger
program should be added with an AUX only input
source. .Accessing this program requires a manual
program change on the Naida CI Q90.
3
Making a Call: Dial the number on your phone. You
will hear the dial tone through your sound
processor.
CAN’T FIND WHAT YOU NEED?
877-829-0026
CONTACT US!
Contact Us
Naida CI Connect Button Function
Bluetooth
Phone
Calls
Bluetooth
Audio
Using TV
Connector
Short
Press
(less than
2 sec.)
Accept
Call N/A N/A
Long
Press
(greater
than 2
sec.)
Reject
incoming
call OR
End call
Stop
movie or
music
streaming
Mute or
unmute
signal from
TV Connector
1. Connector to Sound Processor
2. Microphones
3. Button
*Accepting, ending and rejecting calls can also
be completed on your phone.

TV Connector
QUICK GUIDE
Press the Connect button on the back,
and the indicator light will start blinking blue.
Ensure the processor or compatible hearing
aid is witched on and within 1 meter (3 ft) of
the TV Connector.
A confirmation beep will play with the
connection is successful. This may take up to
10 seconds.
If no audio is present during the connect
process, ,beeps will be played left/right during
5 seconds after the confirmation beep of the
hearing aids.
If the hearing aids are connected to your cell
phone, you can still receive phone calls, even
when using the TV Connector.
In case of an incoming call, the processor or
hearing aid will automatically stop the audio
signal from the TV Connector and alerts will be
played signalizing the incoming call. After the
call, it automatically switches back to the TV
Connector audio signal.
Switch on the TV (or alternative audio
device). If the TV Connector is powered on, it
will automatically transmit the audio signal to
the connected processor or hearing aid.
To adjust the volume of the audio from the TV
Connector:
•Push the volume increase (+) or decrease
(-) button on top of the TV Connector.
LED
Indicator Solid Green Switched on and transmitting audio
Solid White Standby mode
Blinking blue Connecting mode
Blinking Red Wrong audio input
format
No light Switched off
DEVICE DESCRPITION
The TV Connector allows you to connect your Naida CI Q90 sound processor via the Naida CI Connect
and Phonak direct connectivity wireless hearing aids to your TV or other entertainment/communication
devices. The TV Connector sends audio signals within a 15 meter (50 ft) radius wirelessly to your
processor or hearing aids.
CONNECTING THE TV CONNECTOR
TO A PROCESSOR OR HEARING AID
TIP
A long press on the Naida CI Connect button will
mute the signal from the TV Connector. Another
long press on the Naida CI Connect button will
unmute the signal. You will hear a beep to
confirm the signal has been muted or unmuted.
1
2
3
DAILY USE OF THE TV CONNECTOR
TV CONNECTOR AND PHONE CALLS
1
2
1
2
TIP
Line-of-sight between your hearing aids and the
TV Connector is not required. However,
environmental interference like walls or furniture
may reduce the operating range.
1
2
4
TIP
If no audio input is available, the TV Connector
automatically stops the audio transmission. The
indicator light will be solid white (standby mode).
TV CONNECTOR AND PHONE CALLS
To end transmission of the audio signal, switch
off the TV or other connected audio sources. The
TV Connector will go into standby mode
automatically.
You can also turn off the TV Connector using the
power button on the top of the device. When
using the TV connector the next time, turn it on
by pressing the power button.