Televes ZAS HD SAT User manual

High Denition TV Satellite Receiver
Ref. 717501
User Manual
www.televes.com
SATELLITE

EN
ENGLISH
Index
1. Safetyrecommendations ............................................................ 4
2. GeneralInformation ................................................................. 5
2.1. Summaryoffeatures ........................................................... 5
2.2. Contents ....................................................................... 5
2.3. ZAS HD SAT generaloperation.................................................. 5
3. Descriptionofconnetions ............................................................ 6
3.1. RemoteControlUnit ........................................................... 7
4. Setting-up ........................................................................... 8
4.1. TV set connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5. Firststeps ........................................................................... 9
6. Basicfunctions ...................................................................... 11
6.1. TVorRadioselection ........................................................... 11
6.2. Selectionofprograms .......................................................... 11
6.3. Programinformation ........................................................... 11
6.4. Volume/Mutecontrol .......................................................... 12
6.5. QuickMenu .................................................................... 13
6.6. Teletext ........................................................................ 14
7.ElectronicProgramGuide(EPG) ....................................................... 15
8.Mainmenu ........................................................................... 16
9.Channellistmenu .................................................................... 17
9.1. FTATVchannels ................................................................ 17
9.2. FTARadiochannels ............................................................. 17
9.3. CompleteTVlist ................................................................ 17
9.4. CompleteRadiolist ............................................................. 18
9.5. Favorites ....................................................................... 18
10.Timers ............................................................................... 19
11. Installation and Conguration Setting-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
11.1.Preferences .................................................................... 20
11.2.Outputsettings ................................................................ 20
11.3. Regional Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
11.4.LanguageSettings ............................................................. 21
11.5.AccessControl ................................................................. 22
11.6.ChannelsSearching ............................................................ 24
11.7.Maintenance ................................................................... 29
12.SystemInformation .................................................................. 30
13.RecordingWizard .................................................................... 31
14.Recording ........................................................................... 32
15.MediaBrowser ...................................................................... 34
16.Glossary ............................................................................. 36
Menustructure ......................................................................... 37
Technicalspecications ................................................................. 38
Troubleshooting ........................................................................ 39
SATELLITE

4
High Denition TV Satellite Receiver
1. Safety recommendations
¡ Read carefully this manual before attempting to install or handle this
receiver !
The ZAS HD SAT just purchased has been manufactured according to international
safety standards.
Dispose of electronics you no longer need in a friendly environment and in
accordance with relevant regulations.
We recommend you read the following safety tips.
POWERING:
Mains adapter 230V~ / 12V .
This adapter becomes the means to switch o the receiver.
The mains socket that is going to be used to connect the equipment should
be located nearby and should be easily accessible
OVERLOADING:
Do not overload sockets, extensions or adapters to avoid the risk of re or
electric shock.
LIQUIDS:
The equipment must not come into contact with water or even be splashed
by liquids. Do not place containers with water on or near the equipment if it
is not adequately protected.
SMALL OBJECTS:
Avoid proximity of small metallic objects. They may enter the slots or
connectors on the receiver and cause serious damage.
CLEANING:
Do not attempt to clean the receiver without rst unplugging it.
Do not use liquid, abrasive, solvent or aerosol cleaners to clean the receiver, it
may be damaged. Just make use of a soft cloth slightly moistened with water.
VENTILATION:
Place the receiver in a well ventilated area without blocking the vents.
Avoid exposure to sunlight, heat or ame.
Do not place other equipment on the receiver.
CONNECTIONS:
Make connections only recommended to avoid possible damage
LNB CONNECTION:
Unplug the receiver before connecting or disconnecting the LNB.
COULD OTHERWISE DAMAGE THE LNB.
TV CONNECTION:
Unplug the receiver before connecting or disconnecting the TV set.
COULD OTHERWISE DAMAGE THE TV SET.
LOCATION:
Place the receiver in a room inside, protected from shock, rain or direct
sunlight.
> 80 %
> 45 ºC
< -5ºC

5
EN
2. General Information
The Digital Satellite TV Receiver ZAS HD SAT is a product
that lets you view a variety of programs supplied by one
or more satellites.
This manual explains how to install the ZAS HD SAT and
the steps needed to use its various functions.
For the installation of the receiver, as for its correct use, be
sure to read the manual and save it for future reference.
2.1. Summary of features
FTA satellite channels receiver.
DiSEqC 1.2 compatible.
LNB unicable compatible.
MPEG2 and MPEG4/H.264 compatible.
USB PVR ready.
Allows direct recording on both external hard drive and
pen drive (FAT 32) by USB*.
Time Shift function by USB with recording option.
Multimedia function.
HDMl (Auto, 576i, 576p, 720p, 1080i, 1080p and
Highest) output.
Optic audio output (TOSLINK).
Multi-video output - CVBS, RGB (SCART).
Advanced functions for playing (Forward / Rewind,
Previous/ Next File, Pause, Go to).
User friendly menu.
Guided Initial installation.
Pre-programmed channel list.
6 List of Favourites (A, B, C, D, E, F).
Up to 5000 programmes can be stored.
Quick and easy software upgrading via USB port.
Timer function for programmes recording.
Electronic Programme Guide (EPG).
Supports OSD, Teletext and Subtitle (standard and TXT)
functions.
Supports VBI teletext.
Parental lock
Automatically saves the last programme.
Low power consumption.
* Televés does not guarantee a 100% compatibility with all USB
devices.
2.2. Package contents
Verify that the following parts are included in the package:
- 1 x HD SAT receiver ZAS.
- 1 x Remote control unit.
- 1 x Power Adapter.
- 1 x HDMI Cable.
- 2 x Batteries “AAA”.
- Instructions for use.
2.3. ZAS HD SAT general operation
Throughout this manual you will see that the use of the
ZAS HD SAT receiver is based on a variety of menus easy
to use.
These menus will help you enjoy your Televes receiver,
guiding for: installation, channel scan, display ... and many
other functions.
It is necessary to note that new software may change
the functionality of the receiver.
If you have any problems with the operation of your
receiver, see “Troubleshooting” before you call your
installer or technical support of Televés.

6
High Denition TV Satellite Receiver
  
3. Description of connections
Receiver Front Panel
Receiver Rear Panel
No. Name Function description
1 HOST USB Connection for a PEN DRIVE, memory card reader or external hard drive (FAT 32) with
separate powering.
2 LED Operating LED (Red: Standby; Green: power ON).
3 IR IR sensor.
No. Name Function description
1 RF-OUT RF output signal loop for connecting another receiver.
2 RF-IN Input signal from the satellite antenna (powering +13, 18V/250mA select. by menu)
3 SCART TV-OUT TV set connection via SCART.
4 HDMI High Denition Multimedia Interface.
5 OPTICAL Optical audio output
6 DC-IN 12V Input for connecting the AC adapter 220 Vac/12 Vdc
    

7
EN
3.1. Remote Control Unit
Button Function description
Switches between “power ON” and “STANDBY” mode.
TV/R Switches between TV and Radio.
QUICK MENU Direct access to functions: Subtitles, Language, Screen
format and SCART switching-o.
0 ... 9 To select a desired program number.
Direct data entry on the menu.
Press to display the programme information.
GUIDE Activates the Electronic Programme Guide (EPG).
VOL+/VOL- TV/Radio volume adjustment (increase/reduce)
Press this button to temporarily switch-o the sound.
CH / CH Channel UP/DOWN in both TV and Radio modes.
(MENU) Activates the OSD function (On-Screen-Display menu).
(EXIT) Return to the previous menu or exit the menu completely.
In normal mode, return to the previous channel.
/ Lets you move through the dierent options in each menu.
Changes channel (UP/DOWN) in TV or Radio modes.
/
Lets you choose from dierent congurations of the
selected option (in the case of the questions to be
conrmed).
Adjusts volume in TV and Radio modes.
Keys that are functional as the menu in question.
Quick access to Teletext mode.
TXT Activates teletext for the displayed channel.
Recording/Playing stop.
Play/Pause the selected le.
Starts recording the selected channel.
Jumps 30 sec. back in play.
Fast reverse play mode (x2, x4, x8, x16, x32).
Fast forward play mode (x2, x4, x8, x16, x32).
Jumps 30 sec. forward in play.
- Do not dispose of
batteries into the trash
or re. Place them in a
container for the purpose.
- Keep batteries away from
heat, sunlight or re.
Buttons , VOL+/VOL- and CH / CH are marked in Braille.

8
High Denition TV Satellite Receiver
4. Setting-up
Dierent types of TVs and other devices can be connected
to your ZAS HD SAT.
This manual lists the most common ways to connect it. If
you have any problem connecting your receiver please
contact your dealer
There are two ways you can connect the receiver ZAS HD
SAT to your TV:
• via SCART or
• via HDMI (high denition).
If your TV has an HDMI connector, use this type of
connection as you will get the best image quality.
When the connection is made using a SCART cable, the
receiver ZAS HD SAT may provide signal RGB or CVBS
(composite video). By default (factory set), the ZAS HD SAT
is congured to provide the CVBS signal as there are some
TVs that do not support RGB output. However, for higher
image quality is recommended that you select RGB (if your
TV is compatible with these signals).
To change conguration settings from CVBS to RGB, do
so via the menu “Format Scart Video” (see Section 11.2.
Output Settings).
Connect the signal from the antenna to the RF IN ZAS
HD SAT (simple installation).
Connect the video and audio signals between the
receiver ZAS HD SAT and the TV set by means of a
SCART or a HDMI extender.
Turn-on the equipments.
Power the receiver ZAS HD SAT using its mains adapter
unit.
- Televés recommends an HDMI cable category 2
(high speed).
- If your TV has only a DVI connector, use an
HDMI-DVI adapter. Connect an audio cable for
sound output.
- All cables used to wire the receiver will be
shielded.
- Do not plug the mains adapter of the receiver
until all the other connections have been made.
4.1. TV set connection








DiSEqC Switch
2 - 4 - 8 ports Motor
Other Installation Options
Simple Installation
Unicable

9
EN
After the wiring is complete, the mains adapter plugged,
and the ZAS HD SAT powered ON with the RCU (press
button ), it needs some time to make a self-check and
be ready to work.
The front LED ashes during this period. Do not switch o
the receiver or press any key.
The welcome screen is activated automatically and will
guide you in conguring the menus and in searching
channels.
You must rst specify the language in which you want to
display on-screen menus.
Choose the language in which menus are displayed on
screen using the cursor keys or .
Press OK to conrm.
On the next screen you must specify the geographical area
where the receiver is installed and the TV display format
you need (4:3 or 16:9).
Location must be correct because of this data depends a
correct indication of the time displayed on the menus.
Select one of these options using the cursor keys or
, and in each one, change the value using the cursor keys
or .
Press OK to conrm the values and continue.
This receiver features a preprogrammed list of channels
which can be activate at this time. This list may already
contain all the channels you want, so it would not be
necessary to perform a full channel search.
Depending on the country selected in the previous section,
select the appropriate list.
- Press OK key to accept the pre-programmed list and nish
the installation, or press EXIT key to make a full search.
- The load of the list of pre-programmed channel
is designed for a simple conguration, consisting
only of antenna and LNB.
If your installation does not correspond to it (has
additional elements like DiSEqC, Motor,... etc.)
we recommend performing a full satellite search.
5. First steps

10
High Denition TV Satellite Receiver
This screen will indicate if you have a DiSEqC, Motor or
Unicable device in your antenna installation.
If you have a simple installation, ie an antenna connected
directly to the receiver, keep the option “None.”
In paragraph Satellite, you must indicate the satellite your
antenna is pointing.
If your installation does not correspond to this, see. 11.5 .-
Channel search => Antenna Setup.
Select one of these options using the cursor keys or
, and in each one, change the value using the cursor keys
or .
The level bars will show you if you have satellite signal and
what is the strength and quality for each TV channel.
Before you start a channel scanning, you must specify the
requirements of the search.
In Scan Mode, indicate if you want to search: All channels
(“All”) or free-to-air channels (“Free Only”).
In Channel Type, indicate the type of channels you
are searching for: only “TV” , only “Radio” or both “TV &
Radio”.
Indicate if the search is going to be performed across
the entire network,“Yes”, or only on transponders stored
in the receiver, “No”.
Press OK to conrm the settings and continue.
The automatic channel searching starts.
This process may take some time. Please wait.
You can stop the search at any time by pressing OK.
Finally, a summary of the channels found is displayed.
Press OK to continue. Press again this key to start
viewing the channels found.
- If the receiver was not able to found any
channels at the end of the searching, a warning
message will appear. Press OK to continue.
Check connections, press OK to perform another
searching or modify any parameter. (For more
information, see par. 11.5. Channels searching
=> Antenna Setup).

11
EN
6.1. TV or Radio selection
While watching a TV channel, press TV / R on the remote
control unit to switch between TV and Radio channels.
Pressing this key again, you return to the previous mode.
6.2. Selection of programs
To select a program, use CH / CH keys, / cursor
keys or the numeric keypad (0 ... 9) of the remote control
unit.
In addition, the receiver features another way to change
the program in a simple and visual manner. While
watching TV or Radio, press the OK key on the remote
control unit. The list of channels will be displayed. Select
a new program from the list with the keys , , or
and then press OK.
By pressing the key , the technical information for the
selected program will be displayed.
You can return to the last program you were watching
by pressing EXIT.
6.3. Program information
Each time you change your program, you will see
information about it for a few seconds at the bottom of
the screen (banner).
While watching a program, you can view this
information at any time by pressing the button on the
remote control unit.
By pressing this key again, the program
information (banner) displayed will be expanded
showing then a short summary of the content.
If the current text spans more than one
page, use the or keys o to scroll.
Use keys or to show the next event information.
In addition to indicating the number and name of the
channel, current time, start time and ending both the
current and the next event, the “banner” may have the
following icons:
ANTENA 3 HD
14
23.15 - 00.00 CougarTown
00.00 - 01.30 Todo el mundo odia a Chris: Todo el mundo odia las matemáticas
SUB
AUDIO TXT
13
: Estimated time display of current event in
relation to the total length of the same.
ANTENA 3 HD
14
23.15 - 00.00 CougarTown
00.00 - 01.30 Todo el mundo odia a Chris: Todo el mundo odia las matemáticas
SUB
AUDIO TXT
13 : Indication of classication by age.
6. Basic functions

12
High Denition TV Satellite Receiver
ANTENA 3 HD
14
23.15 - 00.00 CougarTown
00.00 - 01.30 Todo el mundo odia a Chris: Todo el mundo odia las matemáticas
SUB
AUDIO TXT
13
: Channel information
ANTENA 3 HD
14
23.15 - 00.00 CougarTown
00.00 - 01.30 Todo el mundo odia a Chris: Todo el mundo odia las matemáticas
SUB
AUDIO TXT
13
: Indicates that the channel audio in Dolby Digital Plus
format.
ANTENA 3 HD
14
23.15 - 00.00 CougarTown
00.00 - 01.30 Todo el mundo odia a Chris: Todo el mundo odia las matemáticas
SUB
AUDIO
TXT
13
: Indicates that the channel transmits several audios.
ANTENA 3 HD
14
23.15 - 00.00 CougarTown
00.00 - 01.30 Todo el mundo odia a Chris: Todo el mundo odia las matemáticas
SUB
AUDIO TXT
13
: Indicates that the channel provides subtitles.
ANTENA 3 HD
14
23.15 - 00.00 CougarTown
00.00 - 01.30 Todo el mundo odia a Chris: Todo el mundo odia las matemáticas
SUB
AUDIO
TXT
13
: Indicates that the channel provides teletext.
- The EPG information is only available when
provided by the supplier.
- Press EXIT to go out.
6.4. Volume / Mute control
Volume control
To increase or decrease the volume, use keys VOL+ /
VOL- or / of your remote control unit.
- The volume can also be controlled through the
volume of your TV.
Mute
To mute the sound, press on the remote control unit.
To restore the sound, press this key once more.
You can also restore the sound by pressing either the
VOL+ / VOL- or / on the remote control unit.
Infomation banner

13
EN
6.5. Quick menu
A quick way to access some of the functions of ZAS HD SAT
such as the subtitle language, audio language, the image
format or disabling the SCART, by pressing the QUICK
MENU.
The selected option appears highlighted. Use keys or
to scroll and select another.
Subtitles language
Select subtitle language between “Disable” and one of
the options available using keys or .
If the transmission oers this service, subtitles are
displayed at the bottom of the screen. If the transmission
does not have this service, it shows the “Disable” option
and then changes are not allowed.
By default, this option is disabled.
Audio language
Select the audio language from those available through
the o keys.
If transmission has not several audios, then the default
option will be displayed and no changes will be allowed.
Screen format
Select the format for the display between “Automatic”,
“Zoom”, “Full” or “Black Borders” for a 16:9 ratio, and
“Automatic”, “Full”, “Letter Box” or “Pan & Scan” for 4:3
ratio, using the keys or . To change the aspect ratio
see menu “Output Settings”.
SCART disabling
This option lets you to disable the signal that informs
the TV when the receiver is turned ON and thus avoiding
turn ON the TV.
Select option SCART disabled and press OK.
- Not all suppliers provide information about the
subtitle or audio languages.

14
High Denition TV Satellite Receiver
6.6. Teletext
The ZAS HD SAT allows you to select all teletext services
provided by the service provider.
To activate Teletext, press the TXT key on the remote
control unit.
A second press of the key TXT, makes the background
transparent to see the image at the same time as the
Teletext.
Teletext services are displayed in the usual way. Use
the or keys to move forward or backward page by
page, or directly enter the page number on the keypad.
On pages that run automatically, press the OK key to
stop the progress and see the page longer. The “
= ”
indication is displayed beside the page number. Press
OK again to run the page.
The control of the ZAS HD SAT features coloured
buttons that facilitate fast access to teletext pages.
Even if your TV does not have Teletext decoder, you can
view it on the screen since the ZAS HD SAT is able to
generate the teletext automatically.
 To exit teletext, press the TXT until it disappears from
the screen.
- If you are using the TimeShift function, or playing
a previously recorded program on the hard drive,
teletext will not be available.

15
EN
The ZAS HD SAT provides the “Program Guide” for
the user to access the TV guide (and also radio guide),
which displays information on current programming (or
subsequent) of dierent channels such as name, start time,
end time, a brief summary ...
To view the information of the electronic program guide
(EPG), press the GUIDE key on the remote control unit
while watching a channel.
The screen will display information in two separate
columns. On the left is the list of channels and the right is
the list of programs for the selected channel.
Scroll through the list of channels or programs using
the or keys. To switch between channel list and
program list, use keys or .
By using red and green keys, you can access information
regarding coming days.
After selecting a program, pressing the OK key will
display a screen where you see the extended description
of it. To return to the previous screen press the OK or
EXIT.
By pressing the blue button on one of the programs of
the list, it automatically creates a new timer with the
program, and displays the“ ” symbol beside the name,
thus indicating this state.
For more information on how to schedule an event, see
paragraph 10. Timers.
Finally, press EXIT to leave the guide.
- The information contained in the guide is provided
by the service provider, so it sometimes may not be
available.
- If the current program does not provide data to
the guide “no data available for this channel”
indication is displayed.
7. Electronic Program Guide (EPG)

16
High Denition TV Satellite Receiver
Press MENU to activate the main menu.
This menu includes six submenus as shown in the
picture:
- Channel Lists
- Timers
- Installation and Setup
- System Information
- Recording Assistant
- Media Browser
Select from the menu options with the keys or and
press OK to accept.
Press EXIT or MENU to exit to previous menu, and nally
exit the menus.
8. Main menu

17
EN
Press MENU, select ‘Channel List’ with or keys and
press OK. It shows all the lists of available channels.
The lists are editable by the user, i.e., a personalised list
can be created. Use this option to order the channels to
your convenience.
9.1. FTA TV channels
The FTA TV channels list shows all FTA TV channels that
have been found during the ‘Channel Search’.
Use the keys , , and to select a channel from
the list, then press OK on the selected channel to watch
it immediately.
By pressing the key on the name of a channel it will be
displayed information about it. To close the information
window press EXIT or press the key .
Edit
Choose the “Free TV Channel”-list with or and press
the blue key to enter the edition menu.
- To move a channel from its position on the list, press OK
on the desired channel. This one will be shown between
the signs “> <”. With the keys , , or place the
channel on its new position and press again OK.
- Pressing the red key on the selected channel, this one will
be deleted.
- If you want to sort the satellite channel list, press the blue
key.
- Please note that this kind of sorting is irreversible.
9.2. FTA Radio channels
The list FTA Radio channels contains all free radio channels
that have been found during the Channel searching.
The management of radio channels is equal to that of TV
channels.
9.3. Complete TV list
The complete list of TV shows all the TV channels (free+
scrambled) that have been found during the “channel
searching”.
The management of these channels is equal to the “FTA
channels”.
You will not be able to watch encrypted channels.
9. Channel list menu

18
High Denition TV Satellite Receiver
9.4. Complete Radio list
The complete list of Radio shows all the radio channels
that have been found during the “channel searching”.
The management of these channels is equal to the “FTA
channels”.
You will not be able to hear encrypted channels.
9.5. Favourites
Select one of the lists of favourites with the or keys
and press the blue key to access the editing menu.
Then it will show two columns, one with all channels
found, and one empty column (to the right of the rst)to
which you can gradually add the channels in the order
you want them to appear by pressing the OK button on
the remote control normal mode (viewing a program).
Use the remote control unit or keys to move up
and down the list.
Use the or keys to change from one list to another.
Use the OK key of the remote control unit to add
channels to the list of favourites.
At the same list, you can add channels both TV and
Radio. To select one of the available lists press the red
keys (previous list) and green (following list).
Once the list of favourite channels has been made,
its channels can be ordered to your convenience by
moving their position. To do this select a channel to be
moved, press OK and with the or keys move it to
its new position. Press OK to save it.
To delete some of the channels added to the list, press
the red key on the remote control over the selection to
be deleted.
By pressing the blue key you access the next
list of favorites. Following the process described
above, you can add channels to the list.
To select one of the above lists, press the yellow key.
Press the EXIT key to exit the previous menu and save
the list or lists of favourites.
- Selecting a channel from one of the lists (either
TV, radio or favourites) makes the list active. This
means that, if you create a list of favourites with
ve channels, for example, and select one of them
from the Favourites menu, each time the OK key is
pressed in normal mode (watching a programme)
only the list of these ve channels is shown.
To be able to see all the channels, select one from
the Complete TV List (Menu => Channel Lists =>
Complete TV List)

19
EN
Through this menu you will be able to make the ZAS HD
SAT record an event at a programmed time. Up to 20
dierent events can be programmed.
The list is displayed empty if no event is created.
This function is only possible if you have an
external drive formatted with FAT 32, a pen
drive (memory stick) or a memory card reader.
Create/Add an event
keys or and press OK to conrm.
To add a new event, press the OK key over the option
Timer on the Main Menu.
 Select one of the timers with the cursor or keys
and press OK to conrm.
Channel: Indicate the channel to be recorded once the
receiver is turned on. By default, it displays the current
channel. Select another one with the keys or .
Date: Enter the date for the event.
Starting Time: Enter the starting time for recording.
Ending Time: Enter the time o for recording
Repeat: Indicate whether this process is performed only
once (“No Repeat”), “Everyday” or “Every week.”
Finally, press OK on the remote control unit o activate the
timer.
Delete an event
A list of programmed events will appear on the “Timer”
menu in both manual format as well as through the EPG.
See par. 7. Electronic Program Guide (EPG).
 To delete an existing event, position the cursor over the
EPG and press the red key.
- The time shown on the adapter is sent by the
service provider. Very rarely, it might happen
that this time is not correct. Check this before
programming an event.
- During the procedure of a Timer only programmes
of the same Multiplex can be seen.
- Events cannot be created if the start or end times
are lower than the current ones.
- Events cannot be created if the time overlaps.
10. Timers

20
High Denition TV Satellite Receiver
This menu lets you customize the functions of the ZAS HD
SAT to suit your preferences.
11.1. Preferences
Time bar information
 Between 1 and 10 seconds, select the time to show the
“banner”on the screen every time you change channels
using or keys.
11.2. Output settings
HDMI output
Select the video output resolution using the keys
or . Possible values are Auto, 576i, 576p, 720p, 1080i,
1080p and Highest (the ZAS SAT HD automatically
adjusts the signal to the maximum resolution that gives
the TV).
- See your TV manual for more information
SCART video format:
Select the video output mode between CVBS or RGB,
using the keys or .
Aspect ratio
Select the screen format between 4:3 or 16:9 with or
keys.
Image format
Within each mode you can select the following formats:
Automatic, Full, Black Borders, Zoom (16:9) and
Automatic, Full, Pan & Scan, Letter Box (4:3).
Audio delay
Between 0 and 250 ms, select the delay will be applied
to the audio relative to video signal by means of or
keys.
Digital audio
Select the audio output mode between Stereo or
Multichannel using the keys or .
11. Installation and Conguration Setting-up