PCIE-1762H Startup Manual 1
Before installation, check to ensure that you have received
the following items:
• 1 x PCIE-1762H card
• 1 x Startup manual
If anything is missing or damaged, contact your distributor
or sales representative immediately.
User Manual
For more information about this product, please refer to
the PCIE-1762H user manual provided on the Advantech
website.
FCC Class A
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in
a residential area is likely to cause interference. In such
cases, users are required to correct the interference at their
own expense.
CE
This product has passed the CE test for environmental
specifications when shielded cables are used for external
wiring. We recommend the use of shielded cables. This type
of cable is available from Advantech. Contact your local sup-
plier for ordering information.
PCIE-1762H
16-Channel Isolated Digital Input and 16-Channel Relay
Output Card
Advantech’s PCIE-1762H is a 16-channel relay actuator
and 16-channel isolated digital input data acquisition card
for PCIe bus. The 16 on-board SPDT relays are ideal for
applications such as device ON/OFF control and power
switching. Moreover, to ensure easy monitoring, each relay
is equipped with a red LED indicator that shows its ON/
OFF status.
Meanwhile, the 16 optically isolated digital input channels
make the PCIE-1762H card suitable for use in environments
with noise or floating potentials.
PCIE-1762H is a relay actuator and IDI card. The product’s
user manual, drivers, and programming SDK are available
on the Advantech website. To obtain this software, simply
access the link below and then search the product name.
http://support.advantech.com.tw
After the device driver is installed, the PCIE-1762H card can
be installed in your computer.
Follow the steps outlined below to install the PCIE-1762H
card:
1. Touch a metal part of the computer to neutralize any
static electricity that may be in your body.
2. Insert the card into a PCI Express slot. To avoid damag-
ing the card, do not use excessive force.
OverviewPacking List
For more information about this or other Advantech
products, visit our website at
http://www.advantech.com
For technical support and customer service, visit
https://www.advantech.com/support/
This startup manual is for PCIE-1762H.
Part No. 2001176200
Printed in Taiwan
Edition 1
August 2018
Declaration of Conformity
Software Installation
Hardware Installation
