Advantech WISE-4060 Installation and operation manual

WISE·4050
4-ch Digital Input and 4-ch Digital Output loT Wireless 1/0 Module
WISE·4060
4-ch Digital Input and 4-ch Relay Output loT Wireless l/0 Module
Overview
Thank you for purchasing this WISE-·1000 seric•s
module. This is a qttick guide to help you deploy the
WISE-4000 series module in your application field. It
will include pov,:cr nnd application wiring. If you need
a tll(lre complicated or specific installation. you could
tr y to contact ADVANTFCH for advanced technical
>ttpporl
or sugge>tions.
Input Power Requirements
Th,, WISF-4000 Series system is designed lor a standard
industrial
unregulated 24 Vnc power supply. For further
applicatic>ns. it can
also accept + 10 to I JO V ue ,>fpowcr
input,
200mV peak to peak or power ripple. and the
imm ediate ripple voltnge s hould be maintained between
+
IOand I- 30V ,x .
Sw~t~h Settings_ __ _ • ____ _ _____ _
\\
S W2 SW1
I J)
lfi]
Switch
Ut.•st.·ri l)fion Position ON( Ild i wlt) OF F
SWt
Op~mtion
Pl Normal !'dock' Initial Mode
Mock
P2 NiA N/A
Dl Type PI Drv Con!act
\Vet Contarl
SW2
(all channels)
1'2
Drv Contact Wc•t Contact
Note I: After the po~ition I of SW 1 been ch anged.
user need to power on the modu le again to apply tho
operation mode
Note 2: All 4 channe ls have to be configured to dry
contact or wet contact in the same time. and both PI
and P2 have to be ch anged together
Notes
For more information on this and other ;\dvantcch
prodnt;.lh .. P.!~AS.<:: visi_t our wcl?§.it~, -" ·s co a ,_ t ,_ : ---·---
http://www,advantcdJ.com
For technical supp,m and service:
http://www.advantcch.com/s upp ort /
This startup manual is for \V1SE-4050i40()0
Part No: 2003
045000 I Ist Edition
I Mav2015
1 Startup Manual
'
Application Wiring
Dry Contact
Wet Contact
Isolated Relay
Output (WISE-4060)
Contact Rating:
(Resistive Load)
260V Ac , 30V oc
250 V"c@ SA
30 V, , @ SA
R.LO+
RLO~
RL1+
RL 1·
(il
R:L2+
.<0
Rl2·
> J)
Rl3+
:\'V
RL3·

Quick Start for WISE-4000 Modules
I. Power up using a 10""30\/,c power supply. that's
C(l!lnected between the
tVs and -Vs pin.
2. Enabk the Wi-Fi interface on your device, and
mahc sure the Wi-Fi adapter is in DJJCI' mode.
3. Select the SSI D: "WISF-4xxx .. MAC:"
(Wi-Fi -
WI SE- 4000 _F6EA95
Advantech
Cell Phone
4. Open the brows,•r,(Google Chrome i:; recom-
mended) and enter the conliguration page
URL: hllp://192.
168. 1.1 /conllg. Then login by
account: root, and password: 00000000.
192.168.1.1 icon'iq
5. Scroll to where you are going to make the con-
figuration. f()r e.xample, scroll to "Network" and
click
.. Go to Conllguration··.
Mac
00 DO·C9F6·EA95
IP
192.168. 1.1
Subnet
255.255 255.0
Gateway
192.168. 1.1
IP Mode
Static
~ DHCP
LED Indicators
• Status/Com:
Gn to ConflqurBtlnn.. -4)
8tilluiiCom C=:J
APnnfra D
\:::JD
OD
\JD
~D
Flashes Green when module starts to work
Flashes Orange when ,:ommunicating
• AP/Infra (Green):
On in AP Mode
Ot ' fin Station Mod<' (Infrastructure)
• Signal Indicator:
Signal ~trength in Station Mode
Startup Manual 2