Advantech UNO-2000-LKAE User manual

User Manual
Lockable Kit User Guide
UNO-2000-LKAE
(with 10 sets inside, only
UNO-1372GH-E3AE have 2 sets as
default package)

1Lockable Kit User Guide
Purpose
The mainly usage of lockable kit is for fixing external I/O cable with UNO System
from any abnormally pulling of cable or accidently vibration of system. In hazardous
location, any sparks will cause exposure and damage the system, with lockable kit,
it can make sure all cables been secured tightly on system to prevent the uninten-
tionally drop of cables.
Part number
UNO-2000-LKAE (with 10 sets inside, only UNO-1372GH-E3AE have 2 sets as
default package)
Assembly with UNO System
Follow the 4 STEPs to fix the I/O cable with lockable kit:
Lockable kit configuration
Lockable screw:
To screw into the hole behind I/O on UNO system.
Lockable Stopper:
Cables need to pass through the lock stopper then
screw tightly to fit cable’s dimension.
Lockable Nut:
For Fixing the lock stopper.
Lockable Stopper
Nut lockableScrew lockable
STEP 1. Find the lockable hole on UNO System near the I/O.
(UNO-1372GH have 3 holes on front panel, 1 on top cover)
STEP 3.
Plug in I/O cable connector by passing through the lockable
stopper and make sure the location of stopper and nut on the
appropriate place.
STEP 4. Adjust the plastic lockable stopper to fit with cable’s dimension
and length.
STEP 2. Assemble the lockable screw into UNO system.