Advantech IDK-1110WP Series User manual

User Manual
IDK-1110WP Series
10.1” WXGA Industrial Display
Kit with Touch Solution

IDK-1110WP User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2017
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
AMI is a trademark of American Megatrends Inc.
IBM and PC are trademarks of International Business Machines Corporation.
Intel® Core 2 Quad, Pentium Dual Core and Celeron are trademarks of Intel Corpo-
ration.
WinBond is a trademark of Winbond Corporation.
All other product names or trademarks are properties of their respective owners.
Part No. 2006K10000 Edition 1
Printed in China December 2017

iii IDK-1110WP User Manual
A Message to the Customer
Advantech Customer Services
Each and every Advantech product is built to the most exacting specifications to
ensure reliable performance in the harsh and demanding conditions typical of indus-
trial environments. Whether your new Advantech equipment is destined for the labo-
ratory or the factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name Advantech has come to be
known.
Your satisfaction is our primary concern. Here is a guide to Advantech’s customer
services. To ensure you get the full benefit of our services, please follow the instruc-
tions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions,
you can easily find answers in your product documentation. These answers are nor-
mally a lot more detailed than the ones we can give over the phone.
So please consult this manual first. If you still cannot find the answer, gather all the
information or questions that apply to your problem, and with the product close at
hand, call your dealer. Our dealers are well trained and ready to give you the support
you need to get the most from your Advantech products. In fact, most problems
reported are minor and are able to be easily solved over the phone.
In addition, free technical support is available from Advantech engineers every busi-
ness day. We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.

IDK-1110WP User Manual iv
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.

v IDK-1110WP User Manual
Contents
Chapter 1 Overview...............................................1
1.1 General Description .................................................................................. 2
1.2 Specifications ............................................................................................ 2
1.2.1 LCD Panel..................................................................................... 2
1.2.2 Touch Screen................................................................................ 2
1.2.3 Environment.................................................................................. 2
1.3 LCD Functional Block Diagram ................................................................. 3
Figure 1.1 Function block diagram .............................................. 3
1.4 Mechanical Characteristics ....................................................................... 3
1.5 Touch Screen driver.................................................................................. 4
1.6 Absolute Maximum Ratings ...................................................................... 4
1.6.1 TFT LCD Module .......................................................................... 4
1.6.2 Backlight Unit ................................................................................ 4
1.6.3 Absolute Environment Ratings...................................................... 4
Chapter 2 Electrical Characteristics...................7
2.1 TFT LCD Module....................................................................................... 8
2.1.1 Power Specification ...................................................................... 8
Table 2.1: Power specification..................................................... 8
2.1.2 Power sequence and control signal timing ................................... 8
Table 2.2: Signal electrical characteristics .................................. 8
2.2 Backlight Unit .......................................................................................... 10
Table 2.3: Backlight driving conditions ...................................... 10
Chapter 3 Signal Characteristics.......................13
3.1 Pixel Format Image ................................................................................. 14
3.2 The Input Data Format ............................................................................ 14
3.3 Pin Description ........................................................................................ 15
Table 3.1: Pin Description ......................................................... 15
3.4 Interface Timing ...................................................................................... 16
3.4.1 Timing Characteristics ................................................................ 16
Table 3.2: Timing Characteristics .............................................. 16
3.4.2 Timing Diagram........................................................................... 17
3.5 Power ON/OFF Sequence ...................................................................... 17
Chapter 4 Touchscreen & Touch Controller.....19
4.1 Touchscreen ........................................................................................... 20
4.1.1 Touch Characteristics ................................................................. 20
4.1.2 Optical Characteristics ................................................................ 20
4.1.3 Mechanical Characteristics ......................................................... 20
4.2 Touch Controller...................................................................................... 20
4.2.1 Electrical Specifications .............................................................. 20
4.2.2 Pin Assignment and Description ................................................. 21
Appendix A LCD Optical Characteristics .............23
A.1 LCD Module Optical Characteristics ....................................................... 24
Table A.1: Optical Characteristics.............................................. 24

IDK-1110WP User Manual vi
Appendix B Handling Precautions ....................... 27
B.1 Handling Precautions.............................................................................. 28

Chapter 1
1Overview

IDK-1110WP User Manual 2
1.1 General Description
The Advantech IDK-1110WP series comes with a 10.1" industrial grade LCD display
and project capacitive touch. The series is also available with flexible options for LCD
screens enhanced treatment such as Anti-Reflection surface treatment and optical
bonding solution. IDK-1110WP series has low power consumption at the typical of
6.18 W. IDK-1110WP series is ideal for embedded applications which customers
have maximum flexibility for mechanical design.
1.2 Specifications
1.2.1 LCD Panel
Display Size: 10.1" LED backlight panel
Resolution: 1280 x 800
Viewing Angle): 85°/85°/85°/85°
Brightness: 500 cd/m2
Contrast Ratio: 800:1
Response Time (ms): 25
Colors: 6 bit (262K)/8 bit (16.2 M)
Nominal Input Voltage: 3.3V
Power Consumption: 6.18 W
Signal Interface: LVDS
Weight: LCD: 360g; W/PCAP: 500g
Dimensions (W x H x D): 230.7 x 152.55 x 6.5 mm
1.2.2 Touch Screen
Touch Screen: Projective Capacitive
Light Transmission: 90 3%
Interface: USB
Surface Treatment: Clear
1.2.3 Environment
Operating Temperature: -20~65 °C
Storage Temperature: -25 ~ 70°C

3 IDK-1110WP User Manual
Chapter 1 Overview
1.3 LCD Functional Block Diagram
The following diagram shows the functional block of the 10.1 inches Color TFT-LCD
Module:
Figure 1.1 Function block diagram
1.4 Mechanical Characteristics
Front View

IDK-1110WP User Manual 4
Rear View
1.5 Touch Screen driver
Please down load the touchscreen driver from Advantech website.
1.6 Absolute Maximum Ratings
1.6.1 TFT LCD Module
1.6.2 Backlight Unit
1.6.3 Absolute Environment Ratings
Note1: With in Ta= 25°C
Note2: Permanent damage to the device may occur if exceed maximum values
Item Symbol Min. Max. Unit Note
Logic/LCD Drive Voltage VCC -0.3 4 [Volt] 1, 2
Item Symbol Value Unit Note
Min. Max. 1, 2
Converter Voltage Vi-0.3 18 [Volt]
Enable Voltage EN --- 5.5 [Volt]
Backlight Adjust ADJ --- 5.5 [Volt]
Item Symbol Min. Max. Unit Conditions
Operating Temperature TOP -20 +65 [oC]
Storage Temperature TST -25 +70 [oC]

5 IDK-1110WP User Manual
Chapter 1 Overview

IDK-1110WP User Manual 6

Chapter 2
2Electrical
Characteristics

IDK-1110WP User Manual 8
2.1 TFT LCD Module
2.1.1 Power Specification
Input power specifications are as follows:
2.1.2 Power sequence and control signal timing
Power sequence and control signal timing are shown in the following figure.
Table 2.1: Power specification
Parameter Symbol
Value Unit Condition
Min. Typ. Max.
Logic/LCD Drive
Voltage
VCC 3.0 3.3 3.6 [Volt] 10%
Input Current ICC - 0.265 0.320 [A] White Pat-
tern(VCC=3.3V at
60Hz)
VCC Power PCC - 0.88 1.15 [Watt]
Allowable Logic/LCD
Drive Ripple Voltage
VCCrp --100[mV]
p-p
With panel loading
Table 2.2: Signal electrical characteristics
Symbol Parameter Min. Typ. Max. Unit Condition
VTH Differential Input High Threshold - - +100 [mV]
VTL Differential Input Low Threshold -100 - - [mV]
| VID | Input Differential Voltage 200 - 600 [mV]
VICM Differential Input Common Mode
Voltage
+1.0 +1.2 +1.4 [V]
RT Terminating Resistor - 100 - [Ohm] -
Note1! The module should be always operated within the above ranges.
Note2! Measurement conditions:

9 IDK-1110WP User Manual
Chapter 2 Electrical Characteristics
a. White Pattern b. Black Pattern
Active Area Active Area
Note3! The specified power supply current is under the conditions at VDD
=3.3V, Ta = 25 ± 2°C, DC Current and fv = 60 Hz, whereas a power dis-
sipation check pattern below is displayed.

IDK-1110WP User Manual 10
2.2 Backlight Unit
Following characteristics are measured under stable condition at 25°C:
Table 2.3: Backlight driving conditions
Item Symbol Values Unit Condition
Min. Typ. Max.
Input Voltage VLED 10.8 12 13.2 [Volt]
Input Current ILED - 0.45 0.50 [A] @ Vi = 12V
(Duty 100%)
Power Consumption PLED - 5.3 5.8 [Watt]
PWM Dimming Frequency FPWM 190 200 20K [Hz] Note 2
PWM Control Duty Ratio 1 - 100 [%] @200Hz
PWM Control Level High Level 2.5 3.3 5.0 V
Low Level 0 - 0.15 V
On Control Voltage VLED ON/OFF
2.5 3.3 5.0 [Volt]
Off Control Voltage - 0 0.8 [Volt]
LED Life Time - 50,000 [Hrs] Note 3
Note1! LED current is measured by utilizing a high frequency current meter as
shown below:
Note2! At 200 Hz PWM control frequency, duty ratio range is restricted from 1%
to 100%
Note3! The lifetime of LED is defined as the time when it continues to operate
under the conditions at Ta = 25 ±2°C and Duty 100% until the brightness
becomes ≤50% of its original value. Operating LED under high tempera-
ture environment will reduce life time and lead to color shift.

11 IDK-1110WP User Manual
Chapter 2 Electrical Characteristics
Power sequence and control signal timing are shown in the following figure.
Note! While the system is turned ON or OFF, the power sequences must fol-
low as below descriptions.
Turn ON sequence: Vi(+12V) →BLON →E_PWM signal
Turn OFF sequence: E_PWM signal →BLON →Vi(+12V)

IDK-1110WP User Manual 12

Chapter 3
3Signal Characteristics

IDK-1110WP User Manual 14
3.1 Pixel Format Image
Following figure shows the relationship between input signal and LCD pixel
format.
3.2 The Input Data Format