Advantech IDS31-190 User manual

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 1of 21
Preliminary
USER MANUAL
TITLE
Industrial Monitor / Monitor
MODEL NAME
IDS31-190
Signature Date Prepared by Date
Please return 1 copy for our
confirmation with your signature
and comments
SERIAL NAME IDS31-190-P35DVA1E

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 2of 21
Preliminary
TABLE OF CONTENTS
NO
ITEM
PAGE
Ⅰ
Overview
3
Ⅱ
General Description
4
Ⅲ
Electrical Specifications
5
1
Electrical Characteristics
5
2
Interface Connections
6-8
Ⅳ
OSD Function
9
Ⅴ
Environment Specifications
10
Ⅵ
Reliability
10
Ⅶ
Inspection Standard
11-13
Ⅷ
Accessory
14-19
Ⅸ
Packing
20
BSMI 甲類
警告使用者這是甲類資訊產品, 在居住的環境中使用時, 可能會造成射頻干擾,
在這種情況下, 使用者會被要求採取某些適當的對策.
警告 : 使用過度恐傷害視力
(1) 使用30分鐘請休息10分鐘。
(2) 2歲以下幼兒不看螢幕, 2歲以上每天看螢幕不要超過1小時。

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 3of 21
Preliminary
Ⅰ. OVERVIEW
The IDS31-190-P35DVA1E is designed 19 inch monitor
- Support the monitor with 1280 × 1024 resolution.
- Brightness - 350 cd/㎡(without Touch)
- Contrast Ratio : 1000:1

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 4of 21
Preliminary
Ⅱ. General Description
Display Type
TFT LCD Panel (19 inch)
Pixel Pitch
0.294 (per one triad) × 0.294
Pixel Format
1280 Hor. By 1024 Ver. Pixels RGB vertical stripe
Display Colors
16.7M colors
Brightness
350 cd/㎡(Typical)
Contrast Ratio
1000 : 1 (Typical)
Response Time
5 ms (TR+ TF)
Viewing
Angle
Horizontal
170˚
Vertical
160˚
Life Time
50,000 Hr (Typical)
Input Signal
Analog RGB, DVI-D
OSD Controls
Soft Power(On/Off), Menu, Select, Up, Down, Auto
Power Saving
(LED Display)
VESA DPMS,
On (Green), Stand-By (Green blinking),
Suspend (Green blinking), Off
Dimension
422(H) x 347(V) x 45(D)
Weight
4.6kg
Operating Temp.
0℃~+50℃
Storage Temp.
-20℃~ +60℃

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 5of 21
Preliminary
Ⅲ. Electrical Specifications
1-1. Electrical Characteristics
Power
DC Input Voltage
12VDC/3.5A ±10%
Standby power
1.0 W
Power consumption
23 W
Analog
Video
Signal
Type
Analog RGB
Gain Level
0.714 ±5%
Input impedance
75ohm ±5%(terminated)
Pixel frequency
Max. 165MHz
Resolution
Max. 1280×1024 / 60Hz
Input
Sync
Signal
Type
H/V, Separate only
Gain Level
TTL level
(High ≥2.0V, Low ≤0.8V)
Polarity
Positive or Negative
Maximum Duty
Max. 25%
Frequency Range
Horizontal
28.5 ~ 80KHz,
Vertical
48 ~ 75Hz
DVI
Differential output
150 ~ 1200 mVp-p
Input clock freq
20 ~ 135 MHz
1-2 Board Block Diagram

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 6of 21
Preliminary
2. I/O Port (Interface Connections)
2-1. Analog RGB Pin Assignment
Connector
P/No.
Symbol
Description
VGA Input
connector For 15P D-sub
1
Red
Red, analog input
2
Green
Green, analog input
3
Blue
Blue, analog input
4
N.C
Not connected
5
DGND
Digital ground
6
Red GND
Ground for Red return
7
Green GND
Ground for Green return
8
Blue GND
Ground for Blue return
9
N.C
Not connected
10
DGND
Detect connector
11
N.C
Not connected
12
DDC Data
DDC Data
13
H-sync
Horizontal sync, input
14
V-sync
Vertical sync, input
15
DDC Clk
DDC Clk
2-2. DVI Jack Pin Assignment
Connector
P/No.
Symbol
Description
DVI
1
RX2N
TMDS Data 2-
2
RX2P
TMDS Data 2+
3
GND
TMDS Data 2/4 Shield
4
NC
TMDS Data 4-
5
NC
TMDS Data 4+
6
SCL-DVI-1
DDC Clock
7
SDA-DVI-1
DDC Data
8
VSYNC
Analog Vertical Sync
9
RX1N
TMDS Data 1-
10
RX1P
TMDS Data 1+
11
GND
TMDS Data 1/3 Shield
12
NC
TMDS Data 3-
13
NC
TMDS Data 3+
14
+5V Power
DVI+5V
15
GND
Ground
16
HPD
Hot Plug Detect
17
RX0N
TMDS Data 0-
18
RX0P
TMDS Data 0+

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 7of 21
Preliminary
19
GND
TMDS Data 0/5 Shield
20
NC
TMDS Data 5-
21
NC
TMDS Data 5+
22
GND
TMDS Clock Shield
23
RXCP
TMDS Clock +
24
RXCN
TMDS Clock -
C1
NC
Analog Red
C2
NC
Analog Green
C3
NC
Analog Blue
C4
HSYNC
Analog Horizontal Sync
2-3. Input Signal format
Character
Mode
Pixel
Freq.
Horizontal Timing
Vertical Timing
Sync
Polar
Freq.
Total
Activ
e
Sync
Polar
Freq.
Total
Active
MHz
KHz
Pixel
Pixel
Hz
Line
Line
640x480 @60Hz
25.175
-
31.47
800
640
-
59.94
525
480
800x600 @60Hz
40.000
-
37.88
1056
800
-
60.32
628
600
1024x768 @60Hz
65.000
-
48.36
1344
1024
-
60.00
806
768
1280x1024 @60Hz
108.000
63.98
1688
1280
60.02
1066
1024
Sync : H/V Separated LVDS
2-4. Touch Glass / Touch Controller
Projected Capacitive Touch
Input Method
Finger
Light Transmittance
More than 82% (Typical)
Operating Temperature
‐25℃~ 70℃Humidity 90% RH at max 35℃
Storage Temperature
-30℃~ 80℃Humidity 90% RH at max 35℃

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 8of 21
Preliminary
Note
1. Total Thickness : 2.45 ± 10%
2. Cover Glass Thickness : 2.0T ( Tempered glass )
3. Transparency : 82% or More
4. Tail : FPC style ( Copper trace )
Controller Board
Circuit Board Dimension
120mm x 40mm
Input Voltage
D.C.+5V (100mA typical, 50mV peak to peakmaximum ripple and
noise
Operating Temperature
-25 to 80 ℃
Storage Temperature
-25 to 80 ℃
Relative Humidity
95% at 60 ℃, RH Non-condensing
Interface
USB: 1.1 Full Speed
Resolution
20482048 resolution
Power consumption
Active Mode: Max 55 mA
Idle Mode : 5mA
Sleep Mode :1mA
Response time
Max. 25 ms

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 9of 21
Preliminary
Ⅳ. OSD Function
1) Button
Button
Function
Notes
Power
Power on/off button
- Turn power on or off
Menu
Main menu on/move button
- Show OSD menu on the screen
- Exit the main menu or submenu
SLEECT
Menu off button
- Submenu Select
- Input Source Select(RGB/DP)
DOWN
Adjust button
- OSD Menu Down
- Moves the bar left to decrease the adjustment
UP
Adjust button
- OSD Menu UP
- Moves the bar right to increase the adjustment
2) Menu
Image
Sub Menu : Brightness, Contrast, Sharpness, Color
Use the ‘Adjust –‘ or ‘Adjust +’button to decrease or increase
the setting
Display
Sub Menu : Auto Adjust, Phase, Clock, Display Position,
Panel Select
Use the ‘Adjust –‘ or ‘Adjust +’button to decrease or increase
the setting
System
Sub Menu : Input Source, OSD Setting, Language, Dimming,
Reset
Use the ‘Adjust –‘ or ‘Adjust +’button to adjust the settings
automatically

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 10 of 21
Preliminary
Ⅴ. Environment Specifications
Parameter
Values
Units
Notes
Min.
Max.
Operating Temperature
0
+50
℃
Storage Temperature
-20
+60
℃
Operating Humidity
5
90
%RH
Storage Humidity
5
90
%RH
Ⅵ. Reliability
No.
Test Item
Conditions
1
High temperature operating test
Ta : 50℃, 120Hr
2
Low temperature operating test
Ta : 0℃, 120Hr
3
High temperature storage test
Ta : 60℃, 120Hr
4
Low temperature storage test
Ta : -20℃, 120Hr
5
High humidity operating test
Ta : 50℃, 80%RH, 120Hr
6
High humidity storage test
Ta : 50℃, 90%RH, 120Hr
7
Thermal shock operation test
Ta : 0℃, 60min 0℃~50℃, 30min
50℃, 60min, 50Cycle
8
Thermal shock storage test
Ta : -20℃, 60min -20℃~60℃, 30min
60℃, 60min, 50Cycle
9
ESD
Contact
8KV,1sec/cycle
Air
15KV,1sec/cycle
10
Vibration
(Non-Operation)
Linear sweep 30minutes, 10~200Hz
1.5G, X, Y, Z direction
11
Shock
(Non-Operation)
50G, 20ms, Half-sine wave
±X, ±Y, ±Z

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 11 of 21
Preliminary
Ⅶ.Inspection standard
1. Description
These inspection standards shall be applied to LCD monitor supplied by GTT.
2. The condition of inspection
2.1 Inspection Environment
1) Ambient temperature : 15~25℃
2) Humidity : 25~75%RH
3) Ambient Illumination :
400~600Lux for external appearance inspection
100~200Lux for light on inspection
2.2 Inspection condition
- Viewing Distance : 30~50㎝from the surface of the monitor.
- Viewing Angle : 90 degree to the front surface of display panel.
- Viewing Distance : 30㎝from the surface of the monitor.
- Viewing Angle : 90 degree to the front surface of display panel.
- Inspection time for 15seconds.
- while the monitor is on the display and while running the Color
patterns(White/Red/Green/Blue)
- Under the inspection condition above, we judge a failure in the inspection
if stain or finger print are detected by naked eyes .
2.3 Inspection resolution
1280×1024, 60Hz
3. Visual inspection
3.1 Packing inspection
Item
Standard
Inspection equipment
Carton label
The character(Model, P/N, S/N
etc…) can be discerned.
* Visual
Box
No broken and dirty
3.2 Appearance inspection of monitor
Item
Standard
Inspection equipment
Rear & side
No crack, Broken and Distortion
* Visual
* Calipers
* Steel scale
Scratch
Noticeable scratch and exfoliation
coating are not permitted
Mounting hole
No omission
Rear label
The character(Model, P/N, S/N
etc…) can be discerned.
Dimension and hole size
Tolerance : ±0.2mm

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 12 of 21
Preliminary
3.3 LCD visual inspection
[unit : mm]
Item
Standard
Inspection equipment
Dot
(Bright & Dark)
Random
N≤ 8
* PC for inspection
* Pattern generator
* Lupe : ×10
* N-test program
* ND Filter
2 adjacent
N≤ 4 (Note 1)
3 adjacent or more
N≤ 2
Total
N≤ 12
Mura(Note 4)
Judged by 2% ND filter in gray pattern
Line defect
Not allowed
* D : Diameter, W : Width, L : Length, N : Count
Note (1) Two dot adjacent
Note (4) The inspection method of ND filter –holding ND filter in front of the panel around
1cm and examine the panel from 35±5cm in the front view for 3 seconds.
3.4 Touch glass & LCD Panel visual inspection [unit ; mm]
Item
Defect size
Q’ty
Inspection equipment
Circular defect
D<2.0
Ignore
* Visual
* Lupe ; ×10
D≥2.0
0
Liner defect
(Scratch,Foreign
object)
W<0.5, L<15
Ignore
W≥0.5, L≥15
0
*out-of-box cosmetic criteria within the viewing area while the touch sensor is on the
display and while running the “Colors” program
* Inspection method
- Position front of touch screen 50cm form your eye.
- Inspection for 15seconds.
- Use one of the following patterns to aid eye.

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 13 of 21
Preliminary
4. Function inspection (Resolution 1280*1024 at 60Hz)
4.1 OSD key function inspection
Item
Standard
Inspection equipment
Key function
Function normally each key button on
the PC mode.
* PC
4.2 Display inspection
Item
Standard
Inspection equipment
Color
No strange color displaying
* PC
* Pattern generator
Flicker
No flicker
Noise
No critical noise
Jittering
No critical jittering
Power LED indicator
Power & signal on
Green
4.3 Function inspection of touch screen
Item
Standard
Inspection equipment
Accuracy
Within 2.5mm each target
& 10% Jitter limit on moving
* Finger

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 14 of 21
Preliminary
Ⅷ.Accessory
1) VGA Cable

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 15 of 21
Preliminary
2) DVI Cable

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 16 of 21
Preliminary
3) AC Cord

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 17 of 21
Preliminary
4)USB Cable

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 18 of 21
Preliminary
5) Adaptor

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 19 of 21
Preliminary

Model : IDS31-190-P35DVA1E
Rev. No : Ver. 0.90
Date :21/APR/2015
Page 20 of 21
Preliminary
Ⅸ. Mechanical Characteristics