Advantek Networks AWN-11G-USB User manual

-
1
-
Wireless –G Range Extra
USB Adapter
Users Manual
Model # AWN-11G-USB

-
2
-
USING T IS DOCUMENT
This document provides detail user guide for Advantek Networks
AWN-11G-USB Wireless-G USB Adapter operation and set-up instructions.
Content
Chapter 1
Introduction --------------------------------------------------------------------------------- 3
Chapter 2
Specifications------------------------------------------------------------------------------- 4
Chapter 3
Installation ----------------------------------------------------------------------------------- 5
3.1 Installation-------------------------------------------------------------------------- 5
3.2 Uninstall ----------------------------------------------------------------------------- 10
Chapter 4
Wireless LAN Management Program ----------------------------------------------- 12
4.1 Introduction of Main Window ------------------------------------------------ 12
4.2 Station Mode----------------------------------------------------------------------- 20
4.3 AP Mode----------------------------------------------------------------------------- 27

-
3
-
Chapter 1: Introduction
Thank you for purchasing Advantek Networks AWN-11G-USB Wireless-G
USB Adapter. AWN-11G-USB is a perfect combination of both performance
and cost-effective solutions. We hoped that you can enjoy both the freedom of
wireless technology and reliability of this product at the same time.
Our AWN-11G-USB provides a full compatibility of all the IEEE 802.11 b/g
protocols that passes the Wi-Fi tests; and ensures the interoperability of these
standards. With AWN-11G-USB on hand it means you can connect to the
internet wireless world without any difficulty.
AWN-11G-USB also equip with full security option setting from the 64/128bits
WEP encryptions second generation WPA-PSK encryption to the most
advanced WPA2-AES encryption. WPA2 is the latest security standard
currently approved by Wi-Fi standards.
Saving mode Adhoc wireless Lan Wake-on-Lan (WOL) and other exciting
features are also included in the AWN-11G-USB. This user manual will guide
you through these exciting features in the following chapters and we believed
that you will enjoy the performance and ease of use on our AWN-11G-USB.

-
4
-
Chapter 2: Specifications
Host system connections
Interface Fully complies with USB 2.0 or 1.1
USB date transfer rate USB high speed (480Mbps) and full speed
(12Mbps)
Wireless LAN (WLAN) environment connections
Multimode features
WLAN Interface Fully complies with IEEE 802.11 b/g specifications
802.11b: DQPSK with data scrambling capability to
provide data rate of 1 2 5.5 and 11Mbps
802.11g :A high-speed Fast Fourier
WLAN transfer rate Transform(FFT)/Inverse Fast Fourier
Transform(IFFT)
provide data rate of 6 9 12.18 24 36 48 and 54Mbps
WLAN Frequency Band
2.4 ~ 2.497 GHz ((Industrial Scientific Medical Band)
Operation Channel Channel 1 ~ 11
Coverage Area Indoors:100m with straight path Outdoor: 300m
Compatibility Fully compatible to IEEE 802.11 b/g devices
Security Hardware-based IEEE 802.11i encryption/decryption
engine including 64-bit/128-bit WEP TKIP and AES
Antenna Detachable dipolar antenna
On: link is on
Off: ling is off
Quick blinking: data transfer
LED present
(Green/Red light)
Slow blinking with 5 times: scan wireless connections
Wake-on-WLAN Wake up system by wireless LAN(AP mode)
SYSTEM REQUIREMENT
Windows Operating System: Windows 98SE ME 2000 XP 32/64 bit Vista
32/64 bit.
PACKAGE CONTENTS
- Wireless LAN USB Adapter
- Antenna
- Installation CD
- User’s Manual

-
5
-
Chapter 3: Installation / Uninstall
Warning! Do not cover or block the airflow to the adapter. The adapter will
reach a high temperature during use.
3.1 Installation
Before you proceed with the installation please notice the following
descriptions.
Note1: The following installation was operated under Windows Vista.
(Procedures are similar for Windows 98SE/ME/2000/XP.)
Note2: If you have installed another wireless adapter driver & utility before
please remove the previous ID and version first before installing this
device.
1. Do not plug the AWN-11G-USB adapter into your computer USB port
before installing the software program. Insert the CD that come with this
product then auto installation window will appear on you monitor screen:
2. While the following screen pops out click Driver Installation

-
6
-
3. Click Driver Installation
4. Choose a set up language. Click Next to process the installation.

-
7
-
5. Click Next at the following screen
6. Click Install at the following screen

-
8
-
7. The system starts software installation of the AWN-11G-USB adapter.
8. Click Finish to complete the installation

-
9
-
9. After click Finish to complete the installation under Windows Vista <ALL
Programs> menu you will find the ID name of REALTEK USB wireless LAN
Utility program installed.
10. Insert AWN-11G-USB adapter into your computer’s USB port it will
automatically detected and active the AWN-11G-USB adapter.

-
10
-
3.2 Uninstall
From “Wireless Network Driver and Utility” or “Control Panel” ”Change or
Remove Programs”.
A. Uninstall the WLAN USB Adapter Driver from “Start” “All Programs” Click
“Uninstall” (or “Change/Remove”) to remove the driver.