Advantek Networks AWN-USB-54S User manual

USB Wireless LAN Adapter
Quick Installation Guide
Model # AWN-USB-54S

1. Install Driver & Utility
STEP 1: Found New Hardware Wizard is displayed after the adapter is plugged. Please click
Cancel to continue.
STEP 2: Insert Installation CD into CD-ROM drive then windows below will appear. Click
Install Driver to begin device driver installation.
STEP 3: Please wait for a while during the Setup Wizard is preparing the setup.
STEP 4: Please read the license agreement. Use the scroll bar to view the rest of this
agreement. Click Yes to accept the agreement.
STEP 5: Please choose Microsoft Zero Configuration Tool or Ralink Configuration Tool
(recommended) to configure the adapter. Click Next to continue.

STEP 6: Please choose Optimize for performance mode to enable the Tx Burst mode for
better performance. Or you can choose Optimize for WiFi mode to run in standard wireless
network.

STEP 7: Please wait for a while during the adapter is configuring your new software
installation.
STEP 8: When the adapter is installed properly, the configuration utility will be displayed
automatically.
STEP 9: Please restart your computer after the installation has finished. Choose Yes, I want
to restart my computer now and click Finish button.
The Configuration Utility appears as an icon on the system tray of Windows while
the adapter is running. You can open the utility by double-click on the icon.