Advent CADNAV2 User manual

CADNAV2

Switching between the OEM system and the inteface can easily
be done by touch screen.
System
Press next lcon on the screen to
scroll through the menu options
pages.

Interface Home Page
The Main menu page of the interface contains the choices for
HDMI Video, OBD Info, Navigation and Settings.

Video:
Once your device is connected
touch the video button to start
viewing. To exit the video page,
touch the screen or press back
or home. 1080P, 720P and 480P are supported.
HDMI

The EQ setting only effects a device that is connected to the
HDMI input through the Media interface. The EQ will have no
effect on the factory radio or other factory Audio sources.
The 10 Band Graphic Equalizer allows you to fine tune the
sound of your music. 2 Preset curves have been added and
you can store one more curve for easy access.
To save your own curve press custom for 2 seconds to save.

Touch the Navigation Icon to enter the IGO map. Please refer to
the IGO map quick start guides for user instructions.
NOTE: The Onstar NAV Icon will still operate as normal. You must
use the interface NAV Icon to access the map.
Navigation

Navigation Path
Navigation file path settings provides the options for path setting,
and running navigation automatically.
This is only used when updating or replacing the map SD card.
Press“ RUN NAVIGATION” to start the map software.
Automatically Run software: Navigation
Select to start Navigation without seeing this
menu each time.
Browse:
Browse will allow you
to see the files and
contents of the
Navigation Memory
folder.

Navigation Path
“.exe”

OBD Information
Outside Temp.
Parking Brake
Applied Brake Pressure
Voltage

OBD Information
Engine RPM
Speect
Vehicle Milage

Navigation Options:
Selects OnStar NAV or Interface
NAV from the Onstar NAV lcon.
GPS voice:
Turns GPS prompt
voice “on”or “off ”.
Settings
GPS Voice Mix:
“on” means
.
GPS prompt voice comes
from driver speaker and keep other
speaker sound soure. “off ” means
GPS prompt voice comes from driver
speaker and mute all other speakers
GPS Volume Level:
This controls the master volume
level of the Navigation voice.
NOTE: A secondary volume
settings is located in the NAV
map setting screen.

Rear camera settings:
During reversing, set (ON),
rear view would be display
on screen.Set (OFF), rear
view would not be display,
still display previous UI.
Navigation settings continued:
Settings
Map Update:
Follows the screen indication
for map update.
Rear Camera Option:
Selection for OEM Camera or
Aftermarket Camera if any.
Temperature unit:
Sets for C or F.

System Update:
Please carry out under the
guidance of the dealer or
professional.
System reset:
When the system
downed, touch it
to reset system.
System settings continued:
Settings
System Language:
English, French or Spanish.
Speedometer Unit:
“ Metric ” for KM/H or “ US ” for MPH.