AEG BSB18BL User manual

2
2
Important!
It is essential that you read the instructions in this manual
before assembling, operating, and maintaining the product.
Subject to technical modifications.

33
123
8
9
7
10
65
4
1. Drill bit
2. Keyless chuck
3. Torque adjustment ring
4. Two-speed gear selector
5. Quick mode selector
6. Auxiliary handle
7. Forward / reverse button
8. Trigger switch
9. LED
10. Battery port

4
4
17
8
9
10
START
STOP
11
12

55
6
16
21
14
Remove the battery pack before starting any
work on the machine.
13
15

6
6
1
2
2
1
click
Remove the battery pack before starting any
work on the machine.

77
78-100 %
33-54 %
55-77 %
10-32 %
<10 %

8
8
1
2

99
3
4
2
1
5

10
10
1
2
1
2

11 11
START
STOP

12
12

13 13
LOCK

14
14

15 15
1
2
click

16
16

17 17

18
18
WARNING!
Read all safety warnings and all instructions. Failure to follow
WKHZDUQLQJVDQGLQVWUXFWLRQVPD\UHVXOWLQHOHFWULFVKRFN¿UHDQG
or serious injury.
Save all warnings and instructions for future reference.
HAMMER DRILL SAFETY WARNINGS
Wear ear protectors when impact drilling. Exposure to noise can
cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of control
can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a „live“ wire
may make exposed metal parts of the power tool „live“ and could
give the operator an electric shock.
Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring. Fasteners contacting a “live” wire may make
exposed metal parts of the power tool “live” and could give the
operator an electric shock.
Sawdust and splinters must not be removed while the machine is
running.
:KHQZRUNLQJLQZDOOVFHLOLQJRUÀRRUWDNHFDUHWRDYRLGHOHFWULF
cables and gas or water pipes.
Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or
by burning them. AEG Distributors offer to retrieve old batteries to
protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System GBS chargers for charging System GBS battery
packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
it off immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING!
7RUHGXFHWKHULVNRI¿UHSHUVRQDOLQMXU\DQGSURGXFWGDPDJHGXH
to a short circuit, never immerse your tool, battery pack or charger
LQÀXLGRUDOORZDÀXLGWRÀRZLQVLGHWKHP&RUURVLYHRUFRQGXFWLYH
ÀXLGVVXFKDVVHDZDWHUFHUWDLQLQGXVWULDOFKHPLFDOVDQGEOHDFKRU
bleach containing products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The electronic battery percussion drill/screwdriver may be used for
drilling, percussion drilling, as well as screwdriving for independent
use away from mains supply.
Do not use this product in any other way as stated for normal use.
BATTERIES
New battery packs reach full loading capacity after 4 - 5 chargings
and dischargings. Battery packs which have not been used for
TECHNICAL DATA HAMMER DRILL BSB18BL
Rated voltage 18 V
Drilling capacity in steel 13mm
Drilling capacity in wood 100 mm (hole saw bit)
Drilling capacity in brick and tile 20 mm
Wood screws (without pre-drilling) 15 mm
No-load speed 1st gear 0 - 550 min-1
No-load speed 2nd gear 0 - 2000 min-1
Rate of percussion under load 1st gear 8800 min-1
Rate of percussion under load 2nd gear 32000 min-1
Max torque with battery (4.0 Ah) 100 Nm
Max torque with battery (6.0 Ah) 140 Nm
Drill chuck range 1.5-13 mm
Weight - not including battery pack 1.6 kg
BATTERY AND CHARGER
Compatible battery pack
(not included)
Compatible charger
(not included)
L1815R
L1820R
L1825R
L1830R
L1840R
L1850R
L1860R
L1860B
AL1218G
BL1218
BLK1218
BL18DP-X5
Use AEG 18V battery and charger only

19 19
some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance
of the battery pack. Avoid extended exposure to heat or sunshine
(risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged,
after use.
To obtain the longest possible battery life remove the battery pack
from the charger once it is fully charged.
For battery pack storage longer than 30 days:
 Store the battery pack where the temperature is below 27°C
and away from moisture.
 Store the battery packs in a 30% - 50% charged condition.
 Every six months of storage, charge the pack as normal.
BATTERY PACK PROTECTION
The battery pack has overload protection that protects it from being
overloaded and helps to ensure long life. Under extreme stress the
battery electronics switch off the product automatically. To restart,
switch the product off and then on again. If the product does not
start up again, the battery pack may have discharged completely. In
this case it must be recharged in the battery charger.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of those batteries has to be done in accordance with
local, national and international provisions and regulations.
ŶThe user can transport the batteries by road without further
requirements.
ŶCommercial transport of Lithium-Ion batteries by third parties is
subject to Dangerous Goods regulations. Transport preparation
and transport are exclusively to be carried out by appropriately.
trained persons and the process has to be accompanied by
corresponding experts.
When transporting batteries:
ŶEnsure that battery contact terminals are protected and
insulated to prevent short circuit.
ŶEnsure that battery pack is secured against movement within
packaging.
ŶDo not transport batteries that are cracked or leak.
Check with forwarding company for further advice.
MAINTENANCE
Remove the battery pack before starting any work on the product.
The ventilation slots of the machine must be kept clear at all times.
Use only AEG accessories and AEG spare parts. Should
components need to be replaced which have not been described,
please contact one of our AEG service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state
the Article No. as well as the machine type printed on the label and
order the drawing at your local service agents or directly at:
Techtronic Industries Australia Pty Ltd
PO Box 1065
Mount Waverley VIC 3149
Tel. no. 1300 234 797
Australia
Techtronic Industries N.Z. Limited
PO Box 12-806
Penrose AUCKLAND 1642
Tel. no. 0800 234 797
New Zealand
SYMBOLS
Safety alert
No-load speed
VVolts
Direct current
Regulatory Compliance Mark (RCM). Product
meets applicable regulatory requirements.
Please read the instructions carefully before
starting the machine.
Do not dispose of electric tools together with
household waste material. Electric tools and
electronic equipment that have reached the end of
their life must be collected separately and returned
to an environmentally compatible recycling facility.

Techtronic Industries Australia Pty Ltd
31 Gilby Road, Mount Waverley, VIC 3149
Melbourne, Australia
Techtronic Industries N.Z. Limited
2 Landing Drive, Mangere
Auckland, 2022, New Zealand
961096339-01A