AEG LFR9514L6U User manual

aeg.com/register
LFR9514L6U
EN User Manual | Washing Machine
aeg.com\register

FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler –
features you might not find on ordinary appliances. Please spend a few minutes reading
to get the very best from it.
Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.aeg.com/support
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data
available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
CONTENTS
1. SAFETY INFORMATION................................................................................ 4
2. SAFETY INSTRUCTIONS.............................................................................. 6
3. PRODUCT DESCRIPTION............................................................................. 8
4. TECHNICAL DATA....................................................................................... 10
5. INSTALLATION.............................................................................................11
6. CONTROL PANEL........................................................................................ 16
7. DIAL AND BUTTONS....................................................................................19
8. SETTINGS.................................................................................................... 22
9. BEFORE FIRST USE....................................................................................23
10. THE WATER SOFTENER (SOFT WATER)................................................23
11. PROGRAMMES.......................................................................................... 27
12. WI-FI - CONNECTIVITY SETUP............................................................32
13. DAILY USE..................................................................................................35
14. HINTS AND TIPS........................................................................................ 40
15. CARE AND CLEANING.............................................................................. 42
16. TROUBLESHOOTING................................................................................ 48
17. CONSUMPTION VALUES.......................................................................... 53
18. QUICK GUIDE............................................................................................ 55
19. ENVIRONMENTAL CONCERNS................................................................56
2 ENGLISH

My AEG Care app
ENGLISH 3

1. SAFETY INFORMATION
Before beginning the installation and use of this
appliance, carefully read the supplied instructions.
The manufacturer is not responsible for any injuries or
damage that are the result of incorrect installation or usage.
Always keep the instructions in a safe and accessible location
for future reference.
1.1 Children and vulnerable people safety
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved.
• Children between 3 and 8 years of age and persons with
very extensive and complex disabilities shall be kept away
from the appliance unless continuously supervised.
• Children of less than 3 years of age should be kept away
from the appliance unless continuously supervised.
• Children should be supervised to ensure that they do not
play with the appliance.
• Keep all packaging away from children and dispose of it
appropriately.
• Keep detergents away from children.
• Keep children and pets away from the appliance when the
door is open.
• If the appliance has a child safety device, it should be
activated.
• Children shall not carry out cleaning and user maintenance
of the appliance without supervision.
4 ENGLISH

1.2 General Safety
• This appliance is for washing domestic-type, machine-
washable laundry only.
• This appliance is designed for single household domestic
use in an indoor environment.
• This appliance may be used in, offices, hotel guest rooms,
bed & breakfast guest rooms, farm guest houses and other
similar accommodation where such use does not exceed
(average) domestic usage levels.
• Do not change the specification of this appliance.
• The appliance maximum load is 10.0 kg. Do not exceed the
maximum load of each programme (refer to the
“Programmes” chapter).
• The operating water pressure at the water entry point from
the outlet connection must be between 0.5 bar (0.05 MPa)
and 10 bar (1.0 MPa).
• The ventilation opening in the base must not be covered by
a carpet, mat, or any floor covering.
• The appliance must be connected to the water mains using
the new supplied hose sets, or other new hose sets
supplied by the Authorised Service Centre.
• Old hose sets must not be reused.
• If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre
or similarly qualified persons to avoid an electrical hazard.
• Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the socket.
• Do not use high pressure water sprays and/or steam to
clean the appliance.
• Clean the appliance with a moist cloth. Use only neutral
detergents. Do not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
ENGLISH 5

2. SAFETY INSTRUCTIONS
2.1 Installation
The installation must comply with
relevant national regulations.
• Remove all the packaging and the transit
bolts including rubber bush with plastic
spacer.
• Keep the transit bolts in a safe place. If the
appliance is to be moved in the future they
must be reattached to lock the drum to
prevent an internal damage.
• Always take care when moving the
appliance as it is heavy. Always use safety
gloves and enclosed footwear.
• Follow the installation instructions supplied
with the appliance.
• Do not install or use a damaged
appliance.
• Do not install or use the appliance where
the temperature can be less than 0°C or
where it is exposed to the weather.
• The floor area on which the appliance is to
be installed must be flat, stable, heat
resistant and clean.
• Make sure that there is air circulation
between the appliance and the floor.
• When the appliance is in its permanent
position, check if it is levelled correctly
with the aid of a spirit level. If it is not,
adjust the feet accordingly.
• Do not install the appliance directly above
a floor drain.
• Do not spray water on the appliance and
do not expose it to excessive humidity.
• Do not install the appliance where the
appliance door cannot be fully opened.
• Do not put a closed container to collect
possible water leakage under the
appliance. Contact the Authorised Service
Centre to ensure which accessories can
be used.
2.2 Electrical connection
WARNING!
Risk of fire and electric shock.
• WARNING: This appliance is designed to
be installed / connected to a grounding
connection in the building.
• Always use a correctly installed
shockproof socket.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable. Should
the mains cable need to be replaced, this
must be carried out by our Authorised
Service Centre.
• Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
• Do not touch the mains cable or the mains
plug with wet hands.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
2.3 Water connection
• The inlet water shall not exceed 25 °C.
• Do not cause damage to the water hoses.
• Before connection to new pipes, pipes not
used for a long time, where repair work
has been carried out or new devices fitted
(water meters, etc.), let the water flow until
it is clean and clear.
• Ensure that there are no visible water
leaks during and after the first use of the
appliance.
• Do not use an extension hose if the inlet
hose is too short. Contact the Authorised
Service Centre for the replacement of the
inlet hose.
• When unpacking the appliance, It is
possible to see water flowing from the
drain hose. This is due to the testing of the
appliance with the use of water in the
factory.
• You can extend the drain hose to
maximum 400 cm. Contact the Authorised
Service Centre for the other drain hose
and the extension.
6 ENGLISH

• Make sure that there is access to the tap
after the installation.
2.4 Use
WARNING!
Risk of injury, electric shock, fire, burns
or damage to the appliance.
• Follow the safety instructions on the
detergent packaging.
• Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
• Do not wash fabrics which are heavily
soiled with oil, grease or other greasy
substances. It can damage rubber parts of
the washing machine. Prewash such
fabrics by hand before loading them into
the washing machine.
• Do not touch the glass door while a
programme operates. The glass can get
hot.
• Make sure that all metal objects are
removed from the laundry.
2.5 Internal lighting
WARNING!
Risk of injury.
• Visible LED radiation, do not look directly
into the beam.
• To replace the internal lighting, contact the
Authorised Service Centre.
2.6 Service
• To repair the appliance contact the
Authorised Service Centre. Use original
spare parts only.
• Please note that self-repair or non-
professional repair can have safety
consequences and might void the
guarantee.
• The following spare parts will be available
for 10 years after the model has been
discontinued: motor and motor brushes,
transmission between motor and drum,
pumps, shock absorbers and springs,
washing drum, drum spider and related
ball bearings, heaters and heating
elements, including heat pumps, piping
and related equipment including hoses,
valves, filters and aquastops, printed
circuit boards, electronic displays,
pressure switches, thermostats and
sensors, software and firmware including
reset software, door, door hinge and
seals, other seals, door locking assembly,
plastic peripherals such as detergent
dispensers. Please note that some of
these spare parts are only available to
professional repairers, and that not all
spare parts are relevant for all models.
• Concerning the lamp(s) inside this product
and spare part lamps sold separately:
These lamps are intended to withstand
extreme physical conditions in household
appliances, such as temperature,
vibration, humidity, or are intended to
signal information about the operational
status of the appliance. They are not
intended to be used in other applications
and are not suitable for household room
illumination.
2.7 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains
electrical and water supplies.
• Cut off the mains electrical cable close to
the appliance and dispose of it.
• Remove the door catch to prevent children
or pets from becoming trapped in the
drum.
• Dispose of the appliance in accordance
with local requirements for the disposal of
Waste Electrical and Electronic Equipment
(WEEE).
ENGLISH 7

3. PRODUCT DESCRIPTION
3.1 Special features
Your new washing machine meets all modern
requirements for an effective treatment of
laundry with low water, energy and detergent
consumption and proper care of fabric.
• The Wi-Fi connection and Remote Start
enable you to start a cycle, to interact with
your washing machine and to check the
washing cycle status in remote control.
• The SoftWater Technology acts as
water softener and removes harsh
minerals from the inlet water and supplies
soft water for the washing. Wash after
wash, fabric stiffness, shrinkage and
colour fading are prevented.
• The water softener function acts
through special resins present in the
appliance. To regenerate the resins and
make them ready to soften the water pour
a special salt in the compartment
Salt
.
• The PowerCare technology has been
designed to protect the fabric fibres thanks
to different pre-mixing phases that
dissolves first the detergent and then
fabric softener in the water before they are
distributed in the laundry. So every fibre is
reached and cared for.
• The ProSense technology detects the
laundry load size defining the programme
duration in 30 seconds. The washing
programme is tailored to the laundry load
and the type of fabric without consuming
more time, energy and water than
necessary.
• The steam has a quick and easy way to
refresh the clothes. The gentle steam
programmes remove odours and reduce
creases in dry fabrics so they need little
ironing.
The Plus Steam option, finishes every
cycle with gentle steam that relaxes the
fibres and reduces fabric creasing. Ironing
will be easier!
• The Stains option pre-treats stubborn
stains optimizing the effectiveness of the
stain remover.
• The AEG Steam Fragrance, thanks to the
steam programmes offers the perfect
solution for refreshing even the most
delicate garments without washing. Use
the delicate fragrance exclusively
developed by AEG to add a pleasant
feeling of "just-washed" garment to the
removing odours and wrinkles action.
8 ENGLISH

3.2 Appliance overview
1 2 3 10
6
7
8
411
9
12 13
5
1Worktop
2Detergent dispenser and salt
compartment
3Control panel
4Door handle
5Internal light
6Rating plate
7Drain pump filter
8Feet for levelling the appliance
9Drain hose
10 Inlet hose connection
11 Mains cable
12 Transit bolts
13 Hose support
00000000
00A
Mod. xxxxxxxxx
000V ~ 00Hz 0000 W
910000000 00
Prod.No.
B C D EA
The rating plate reports:
A. QR code
B. model name
C. product number
D. electrical ratings
E. serial number
3.3 Detergent dispenser and salt
compartment
Always follow the instructions that you
find on the packaging of the detergent
products. Anyway, we recommend not to
exceed the maximum indicated level in
each compartment ( ).
ENGLISH 9

Max
Max
Max
Salt
Salt
Compartment for washing phase:
powder detergent, stain remover.
When using liquid detergent,
make sure that the special
container for liquid detergent is
inserted. Refer to 'Filling the
detergent and additives' in 'Daily
Use' chapter.
Compartment for liquid additives (fabric
conditioner, starch).
Salt
Compartment for salt.
Read carefully 'The Water
Softener technology (Soft
Water)'.
Salt refilling when required by
the appliance maintains the
Soft Water efficient.
Maximum level for detergent/additives
quantity.
When selecting a prewash phase, put the
detergent/additive in a dosing ball inside
the drum.
After a washing cycle, if necessary,
remove any detergent residue from the
detergent dispenser.
4. TECHNICAL DATA
Dimension Width/ Height/ Total depth 59.7 cm /84.7 cm /63.6 cm
Electrical connection Voltage
Overall power
Fuse
Frequency
230 V
2100 W
10 A
50 Hz
Level of protection against ingress of solid particles and moisture ensured
by the protective cover, except where the low voltage equipment has no
protection against moisture
IPX4
Water supply pressure Minimum
Maximum
0.5 bar (0.05 MPa)
10 bar (1.0 MPa)
Water supply 1) Cold water
Maximum Load Cotton 10.0 kg
Spin Speed Maximum spin speed 1400 rpm
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
10 ENGLISH

5. INSTALLATION
WARNING!
Refer to Safety chapters.
5.1 Unpacking
WARNING!
Remove all the packaging and the transit
bolts before installing the appliance.
WARNING!
Use the gloves.
1. Remove the external film. If necessary,
use a cutter.
2. Remove the cardboard top and the
polystyrene packaging materials.
3. Remove the internal film.
4. Open the door and remove the
polystyrene piece from the door seal and
all the items from the drum.
5. Carefully put the appliance down on its
rear side.
6. Put the front polystyrene packaging
element on the floor under the appliance.
Make sure not to damage the hoses.
7. Remove the polystyrene protection from
the bottom.
ENGLISH 11

1
2
8. Pull up the appliance in vertical position.
9. Remove the power supply cable and the
drain hose from the hose holders.
It is possible to see water flowing
from the drain hose. This is due to
the testing with water of the appliance
in factory.
10. Remove the three bolts by using the
spanner supplied with the appliance.
11. Pull out the plastic spacers.
12. Put the plastic caps, that you find in the
user manual bag, in the holes.
We recommend that you keep the
packaging and the transit bolts for any
movement of the appliance.
5.2 Positioning and levelling
1. Install the appliance on a flat hard floor.
Make sure that carpets do not stop the
air circulation below the appliance.
Make sure that the appliance does not
touch the wall or other units.
2. Loosen or tighten the feet to adjust the
level.
WARNING!
Do not put cardboard, wood or equivalent
materials below the appliance feet to
adjust the level.
12 ENGLISH

x4
The appliance must be level and stable.
A correct adjustment of the appliance
level prevents the vibration, noise and
the movement of the appliance when in
operation.
When the appliance is installed on a
plinth or a tumble dryer is stacked on the
washing machine, use the accessories
described in chapter 'Accessories'. Read
carefully the instructions supplied with
the appliance and with the accessory.
5.3 Fixing plate kit
If you install the appliance on a plinth that is
not an accessory supplied by AEG, secure
the appliance with the fixing plates. This
spare part is available in web shop or from
authorised dealer.
Read carefully the instructions supplied with
the accessory.
5.4 The water inlet hose (Ultra Anti-
flood)
Before connecting up the machine to new
pipework or to pipework that has not been
used for some time, run off a reasonable
amount of water to flush out any debris that
may have collected in the pipes.
To protect drinking water enclosed non-
return valve must be installed between the
water tap and the water supply hose.
Connect the water inlet hose to the cold water
tap with 3/4" thread.
WARNING!
Make sure that there is no water leakage
from the coupling.
ENGLISH 13

WARNING!
For any reason, do not disconnect the
water inlet hose from the appliance. If it is
necessary, contact the Authorised
Service Centre.
5.5 The inlet hose
1. Connect the water inlet hose to the back
of the appliance.
2. Position it toward left or right depending
on the position of the water tap.
20º20º
45º45º
Make sure that the inlet hose is not in
vertical position.
3. If necessary, loose the ring nut to set it in
the correct position.
4. Connect the water inlet hose to the cold
water tap with 3/4" thread.
WARNING!
The inlet water shall not exceed 25 °C.
CAUTION!
Make sure that there are no leaks from
the couplings.
Do not use an extension hose if the inlet
hose is too short. Contact the service
centre for information on inlet hose
replacement.
5.6 Water-stop device
The inlet hose has a water stop device. This
device prevents water leaks in the hose
because of its natural ageing.
The red sector in the window «A» shows this
fault.
A
If this occurs, close the water tap and contact
the authorized service centre to replace the
hose.
5.7 Water drainage
The drain hose should be positioned at a
height of not less than 60 cm and not more
than 100 cm from the floor.
You can extend the drain hose to
maximum 400 cm. Contact the
authorized service centre to buy the other
drain hose and the extension.
14 ENGLISH

It is possible to connect the drain hose in different ways:
min.600 mm
max.1000 mm
• Connect the drain hose to the spigot and
tighten it with a clamp.
• Position the hose directly to a built-in drain
pipe in the room wall and tighten it with a
clamp.
• Without the plastic hose guide, to a sink
spigot - put the drain hose in the spigot
and tighten it with a clamp.
• To a stand pipe with vent hole - insert the
drain hose directly into a drain pipe or
stand pipe.
• The drain hose can be bent into U shape
and put around the plastic guide. On the
edge of a sink - fasten the guide to the
water tap or to the wall.
Make sure that the drain hose makes a
loop to prevent particles going into the
appliance from the sink.
Make sure that the plastic guide cannot
move when the appliance drains and the
drain hose end is not immersed in the
water. There may be a return of dirty
water into the appliance. Buy accessories
from authorised supplier.
The end of the drain hose must always
be ventilated , i.e. the inner diameter of
the drain pipe (min. 38 mm - min. 1.5")
must be larger than the external diameter
of the drain hose.
5.8 Electrical connection
At the end of installation you can connect the
mains plug to the mains socket.
The rating plate and the 'Technical Data'
chapter indicate the necessary electrical
ratings. Make sure that they are compatible
with the mains power supply.
Check that your domestic electrical
installation can take the maximum load
required, also taking into account any other
appliances in use.
ENGLISH 15

Connect the appliance to an earthed
socket.
The power supply cable must be easily
accessible after installing the appliance.
For any electrical work required to install this
appliance, contact our Authorised Service
Centre.
The manufacturer does not accept any
responsibility for damage or injury through
failure to comply with the above safety
precaution.
6. CONTROL PANEL
6.1 Control panel description
Sports
Home
Special
45 32 7 86
14 13 11 10 9
12
1
The options are not selectable with all washing programmes. Check the compatibility
between options and washing programmes in the "Options compatibility with programmes"
paragraph in the "Programmes" chapter. An option can exclude another one, in this case
the appliance doesn't allow you to set the incompatible options together.
Make sure the screen and touch buttons are always clean and dry.
1On/Off push button
2Programme dial
3Favourite programmes
4Display
5Plus (+) and Minus (-) touch buttons
linked to Finish In option
6Wi-fi connection and Remote Start touch
button
7Finish In touch button
8Start/Pause touch button
9Plus Steam touch button
10 Extra Rinse touch button
11 Time Save touch button
16 ENGLISH

12 Stains/Prewash touch button and
permanent Child Lock option
13 Spin touch button
14 Temperature touch button
6.2 Display
Door locked indicator.
Washing phase indicator. It flashes during pre-wash and wash phase.
Rinsing phase indicator. It flashes during rinse phase.
Spinning and draining phase indicator. It flashes during spin and drain phase.
Steam phase indicator.
Anti-crease phase indicator.
Eco programme indicator: it lights on when the selected programme and options have an
eco profile.
Add garments indicator: it lights on when the programme starts and the user can still
pause the appliance and add more laundry.
Extra Rinse indicator.
ProSense indicator.
Finish In indicator.
ENGLISH 17

The digital indicator can show:
• Programme duration (e. g. ).
The time shown when the programme is set could not correspond
to effective duration and change after ProSense phase.
• Maximum load.
• Finish in time (e. g. or ).
• Cycle end ( ).
• Warning code (e.g. ).
• Indication of total operating hours of the appliance. Refer to the 'Operating hours
counter' section in the 'Settings' paragraph for more details.
• When working with the APP: , (access point), (update). Please re‐
fer to the chapter 'Wi-FI - Connectivity setup'.
Maximum load indicator. The value is shown for three seconds after programme selection,
alternated with cycle duration.
Maximum laundry indicator. It blinks if the laundry amount exceeds the declared load.
Salt refilling indicator. The compartment
Salt
needs salt refilling: the compartment is empty
or the salt is not enough.
This indicator reminds to run a cleaning cycle.
APP notification to check.
Remote connection indicator.
Wi-Fi connection indicator.
Child safety lock indicator.
The Temperature area:
Temperature indicator
Cold water indicator
The spin area:
Spin speed indicator
No Spin indicator. Spin phase is off.
Extra Silent indicator.
Rinse hold indicator.
Pre-wash indicator.
Stain indicator.
18 ENGLISH

7. DIAL AND BUTTONS
7.1 On/Off
Pressing this button for a few seconds allows
to activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease the
energy consumption in a few cases, you may
need to activate the appliance again.
For more details, refer to Stand-by paragraph
in Daily Use chapter.
7.2 Programme dial
By rotating the programme dial it is possible
to select the desired programme.
7.3 Favourite programmes
These selector positions are available after
the appliance have been connected to Wi-Fi.
The favourite programmes can be set and
saved via App only choosing from the
available ones which are divided into the
three categories indicated on the control
panel.
Once the favourite programmes have been
set, you can select one of them via App or by
turning the programme dial to relevant
position: the relevant led comes on and the
information on the display are updated
accordingly.
The favourite programmes can be
cancelled through the related App
command or pressing the Factory Default
key combination.
7.4 Introduction
The options/functions are not selectable
with all washing programmes. Check the
compatibility between options/functions
and washing programmes in the
"Programme Chart". An option/function
can exclude another one, in this case the
appliance doesn't allow you to set the
incompatible options/functions together.
Make sure the screen and touch buttons
are always clean and dry.
7.5 Plus (+) and Minus (-) touch
buttons linked to Finish In option
These buttons allow increasing (+) and
decreasing (-) the time of cycle end.
7.6 Remote start
A quick touch of this button activates the
Remote Start function that allows you to start,
pause and stop the appliance remotely.
The related led comes on and the related
icon appears on display.
If you set a programme via App and it
does not match with the knob position,
text appears alternating with
programme duration.
Press and hold this button for longer time to
provide two other functions:
• hold it down for 3 seconds as long as a
click sounds: the Wi-Fi is turned on and
off.
• hold it down for 10 seconds as long as a
double beep sounds and appears on
the display: to reset the Network
Credentials.
ENGLISH 19

7.7 Finish In
Set this option as last after programme
and other options selection, otherwise it
can be cancelled if you change some
setting.
This button allows activating the Finish In
option and by means of the Plus (+
increases) and Minus (- decreases) touch
buttons it is possible to choose the time within
which a programme should terminate. The
programme end can be postponed by one 1
hour every + button touch until 24 hours
maximum. The 'finish in' time can be reduce
by means of the - button until 0.
The display shows the normal programme
duration alternatively with the set programme
end time (expressed in hours 0h). The
minimum selectable time corresponds to
rounded up hour of the maximum duration of
a programme (e.g. if the cycle duration lasts
3:15 hours, the minimum selectable time will
be 4h).
After programme start, the door is locked and
the appliance starts the ProSense phase.
When load estimation ends, on the display
the icon of running phase blinks and the time
digit counts down in steps of one hour and in
steps of 1 minute during the last hour.
7.8 Start/Pause
Touch the Start/Pause button to start,
pause the appliance or interrupt a running
programme.
7.9 Plus Steam
This option adds a steam phase followed by a
short anti-crease phase at the end of the
washing programme.
The steam phase reduces fabric creasing and
facilitates the fabric ironing.
The Plus Steam option achieves good results
with a small load because steam better
penetrates the laundry if there is more space.
For this reason, the programme maximum
load combined with this option is 2 kg
(approximately 8 - 10 shirts).
When setting the Plus Steam option, the
maximum load drops to 2 kg in the display
and programme time is adjusted accordingly.
The indicator blinks in the display during
steam phase.
This option can affect the programme
duration.
When the programme stops the display
shows a zero , the indicator is steady
on.
The anti-crease phase starts, the indicator
is blinking, and the Start/Pause led
remains lit. The drum performs smooth
movements for about 30 minutes to keep the
steam benefit.
To interrupt the anti-crease phase, you can:
• Press the On/Off button for a few
seconds to activate or the deactivate the
appliance.
• Turning the programme dial in another
position.
When the anti-crease movements stop and
the door unlocks, the appliance proposes
again the previous set programme.
A small laundry load helps to reach better
results.
7.10 Extra Rinse
With this option you can add a few rinses to
the selected washing programmes and
optimise the fabric softener distribution and
improve the fabric softness.
It is suggested when you use the fabric
softener.
Useful for people allergic to detergents and in
areas where the water is soft.
This option increases the programme
duration.
The button indicator comes on.
20 ENGLISH