AEM Wacker Neuson TH627 User manual

Operator’s manual
Telehandlers
TH627
Machine model 418-12
Version 1.0
Document number 1000390678
Language [us]
This Operator's Manual includes the
AEM Safety -anual RTF-0907

Copyright – 2018 Kramer-Werke GmbH
Printed in Germany
All rights reserved, in particular the copyright, the right of reproduction and the right of distribution applicable
worldwide.
This document may be used by the receiver only for the designated purpose. It may in no way be duplicated or
translated into any other language, in whole or in part, without prior permission in writing from the manufacturer.
No reproduction or translation of this publication, in whole or part, without the written consent of KRAMER-
WERKE GmbH.
Violations of legal regulations, in particular of the copyright protection, shall be subject to civil and criminal
prosecution.
KRAMER-WERKE GmbH keep abreast of the latest technical developments and constantly improve their
products. For this reason, we may from time to time need to make changes to figures and descriptions in this
documentation that do not reflect products that have already been delivered and that will not be implemented on
these vehicles.
Technical data, dimensions and weights are only given as an indication. Responsibility for errors or omissions
not accepted.
The cover features the machine with possible optional equipment.
Exclusively built for Wacker Neuson.
Kramer-Werke GmbH
Wacker-Neuson-Str. 1
D-88630 Pfullendorf
Phone: [phone]
E-mail: [email protected]
www.kramer.de
Legend
Original Operator’s Manual x
Translation
of original Operator’s Manual –
Version 1.0
Date 06/2018
Document BA 418-12 *

BA 418-12 * 1.0 * BA_418_12_V1_usIVZ.fm I-1
Table of contents
Table of contents
EC / EU Declaration of Conformity ............................................................................................................. EG-1
Declaration of manufacturer........................................................................................................................ EG-2
1Preface
1.1 Operator’s manual ................................................................................................................................ 1-1
1.2 Warranty and liability ............................................................................................................................ 1-4
2 Safety
2.1 Safety symbols and signal words ......................................................................................................... 2-1
2.2 Behavioral measures and safety instructions ....................................................................................... 2-2
2.3 Qualification of operating and maintenance personnel......................................................................... 2-3
2.4 Operation.............................................................................................................................................. 2-4
2.5 Lifting gear applications ........................................................................................................................ 2-8
2.6 Trailer operation ................................................................................................................................. 2-10
2.7 Attachment operation ......................................................................................................................... 2-11
2.8 Towing, loading and transporting ....................................................................................................... 2-12
2.9 Maintenance ....................................................................................................................................... 2-15
2.10 Measures for avoiding risks ................................................................................................................ 2-18
3 Introduction
3.1 Machine overview ................................................................................................................................. 3-1
3.2 Brief description of machine ................................................................................................................. 3-4
3.3 Information and regulations on use ...................................................................................................... 3-6
3.4 Labels ................................................................................................................................................. 3-26
4 Putting into operation
4.1 Cabin/control stand............................................................................................................................... 4-1
4.2 Overview of control elements ............................................................................................................. 4-29
4.3 Overview of indicator lights................................................................................................................. 4-34
4.4 Preparatory work ................................................................................................................................ 4-49
4.5 Starting and stopping the engine ........................................................................................................ 4-58
5Operation
5.1 Steering system .................................................................................................................................... 5-1
5.2 Accelerator actuation ............................................................................................................................ 5-7
5.3 Brake .................................................................................................................................................. 5-10
5.4 Machine travel operation .................................................................................................................... 5-14
5.5 Differential lock ................................................................................................................................... 5-21
5.6 Lights/signaling system ...................................................................................................................... 5-23
5.7 Window wiper - / wash system ........................................................................................................... 5-32
5.8 Heating, ventilation and air conditioning system................................................................................. 5-34
5.9 Work hydraulics .................................................................................................................................. 5-37
5.10 Attachments........................................................................................................................................ 5-65
5.11 Work operation ................................................................................................................................... 5-86
5.12 Emergency lowering ......................................................................................................................... 5-110
5.13 Options ............................................................................................................................................. 5-112
5.14 Putting out of operation/back into operation ..................................................................................... 5-167
5.15 Permanently putting out of operation................................................................................................ 5-169
6Transport
6.1 Towing the machine ............................................................................................................................. 6-1
6.2 Towing the vehicle ................................................................................................................................ 6-4
6.3 Loading the vehicle............................................................................................................................... 6-5
6.4 Transporting the vehicle ..................................................................................................................... 6-10
Table of contents

I-2 BA 418-12 * 1.0 * BA_418_12_V1_usIVZ.fm
Table of contents
7 Maintenance
7.1 Information on maintenance ................................................................................................................. 7-1
7.2 Maintenance overview .......................................................................................................................... 7-4
7.3 Vehicle fluids and lubricants ............................................................................................................... 7-13
7.4 Maintenance accesses ....................................................................................................................... 7-17
7.5 Cleaning and maintenance ................................................................................................................. 7-20
7.6 Lubrication work.................................................................................................................................. 7-25
7.7 Fuel system ........................................................................................................................................ 7-35
7.8 Engine lubrication system................................................................................................................... 7-39
7.9 Cooling system ................................................................................................................................... 7-42
7.10 Air filter................................................................................................................................................ 7-49
7.11 V-belt/toothed belt............................................................................................................................... 7-52
7.12 Hydraulic system ................................................................................................................................ 7-54
7.13 Electrical system................................................................................................................................. 7-62
7.14 Heating, ventilation and air conditioning ............................................................................................. 7-68
7.15 Washer system ................................................................................................................................... 7-72
7.16 Axles/drive .......................................................................................................................................... 7-73
7.17 Braking system ................................................................................................................................... 7-74
7.18 Tires.................................................................................................................................................... 7-76
7.19 Maintenance of attachments............................................................................................................... 7-79
7.20 Maintenance of options....................................................................................................................... 7-80
7.21 Camera maintenance (optional) ......................................................................................................... 7-82
7.22 Exhaust gas cleaning system ............................................................................................................. 7-83
7.23 Machine preservation ......................................................................................................................... 7-84
8Malfunctions
8.1 Diesel engine malfunctions................................................................................................................... 8-1
8.2 Malfunctions of the travel drive ............................................................................................................. 8-3
8.3 Disorders in the work hydraulics........................................................................................................... 8-4
8.4 Malfunctions of the electrical system .................................................................................................... 8-5
8.5 Malfunctions in the air conditioning system (option) ........................................................................... 8-34
9 Technical data
9.1 Model and trade names ........................................................................................................................ 9-1
9.2 Engine................................................................................................................................................... 9-1
9.3 Traveling drive/axles............................................................................................................................. 9-2
9.4 Brakes................................................................................................................................................... 9-4
9.5 Tires...................................................................................................................................................... 9-4
9.6 Steering system .................................................................................................................................... 9-5
9.7 Work hydraulics .................................................................................................................................... 9-5
9.8 Electrical system................................................................................................................................... 9-7
9.9 Tightening torques .............................................................................................................................. 9-14
9.10 Coolant ............................................................................................................................................... 9-15
9.11 Noise emissions.................................................................................................................................. 9-15
9.12 Vibration.............................................................................................................................................. 9-16
9.13 Weight................................................................................................................................................. 9-16
9.14 Payload/lift capacity/stability ............................................................................................................... 9-17
9.15 Dimensions ......................................................................................................................................... 9-28
Index
Index ..............................................................................................................................................................S-1

EC / EU Declaration of Conformity
BA 418-12 * 1.0 * 418_12_EG_Konformitaet.fm EG-1
EC / EU Declaration of Conformity
according to directive 2006/42/EC, EU official register L157 from June 09, 2006
according to directive 2000/14/EC, EU official register L162 from 7/3/2000
according to directive 2014/30/EU, EU official register L96 from March 29, 2014
Manufacturer
Kramer-Werke GmbH, Wacker-Neuson-Str. 1, D-88630 Pfullendorf
Product description
We hereby declare that the abovementioned product meets all relevant
clauses of the harmonization laws listed.
The manufacturer bears sole responsibility for issuing this compliance statement.
Compliance assessment procedure used
The compliance assessment procedure in accordance with Schedule VIII to EC directive 2000/14 was
employed to determine the environmentally polluting noise emissions for use of the machines in question in
the open air.
Notified body involved in procedure
DGUV Test Prüf- und Zertifizierungsstelle [DGUV testing and certification center] (EU identification
number: 0515, Building Trade Department)
Landsberger Straße 309, D-80687 Munich
Applicable harmonized standards
EN 13309:2010, EN 1459-1:2017, EN 1459-5:2015
Other applicable standards and technical regulations
ISO/TR 25398:2006
Authorized representative for the compilation of technical
documentation
Kramer-Werke GmbH, Wacker Neuson Straße 1, D-88630 Pfullendorf
Pfullendorf, the _ _ ._ _ ._ _ _ _
M. Arndt
Head of product development
Kramer-Werke GmbH
Original declaration of conformity
Designation Telehandlers
Type 418
Variant 418-12
Trade name TH627
Serial number WNK41812xxxxx _ _ _ _
Output in kW 55.4
Measured sound power level dB(A) 103
Guaranteed sound power level dB(A) 104
EC / EU Declaration of Conformity

Declaration of manufacturer
EG-2 BA 418-12 * 1.0 * 418_12_EG_Konformitaet.fm
Declaration of manufacturer
Owing to the exhaust emission values, this vehicle is not licensed for use inside the
European Union (EU).
Manufacturer
Kramer-Werke GmbH, Wacker-Neuson-Str. 1, D-88630 Pfullendorf
Product description
The following standards and/or technical specifications have been
used for the proper application of the requirements regarding safety
and health stated in the EC Directives:
2006/42/EC, 2000/14/EC, 2014/30/EU, EN 13309:2010, EN 1459-1:2017, EN 1459-5:2015
Authorized representative for the compilation of technical
documentation
Kramer-Werke GmbH
Product Development
Wacker-Neuson-Str. 1
D-88630 Pfullendorf
Pfullendorf, the _ _ ._ _ ._ _ _ _
M. Arndt
Head of product development
Kramer-Werke GmbH
Designation Telehandlers
Type 418
Variant 418-12
Trade name TH627
Serial number WNK41812xxxxx _ _ _ _
Output in kW
(Exhaust fume values do not correspond to the
EU standards for low-emission engines)
55.4
Declaration of manufacturer

BA 418-12 * 1.0 * 418_12_1_Vorwort.fm 1-1
Preface 1
1 Preface
1.1 Operator’s manual
Important information about the operating personnel
This Operator’s Manual only applies to the machines on the cover sheet.
It provides information on how to use, adjust and operate the machine,
and on how to perform maintenance on it, and is therefore only intended
for the operator and operating company.
Before performing machine travel or operation for the first time, the user
must be briefed on this machine and must carefully read and understand
this Operator’s Manual, in particular chapter “Safety instructions”.
Work on the machine may only be performed by trained and instructed
personnel that have been authorized by the operating company. Any
person involved in operation, inspection, maintenance, servicing, repair
work or transport of the machine must read, understand and follow the
complete instructions in the Operator’s Manual and in particular the safety
instructions.
The buyer/operating company is responsible for the operators’ training in
safe working on and with the machine.
The basis for this in the Federal Republic of Germany is the
"DGUV principle 308-009." Get informed on and follow the legal
regulations of your country.
recommend repeating the training sessions at regular intervals.
The buyer/operating company is responsible for ensuring that any
additional safety regulations applicable in the country of use of the
machine are followed.
The machine may only be operated by persons who are physically,
mentally and professionally suited for this work.
Persons under the influence of alcohol or drugs may not use the machine.
The operator is the person performing machine operation and/or travel.
• Before putting the machine into operation, the operator of the machine
must ensure that it is in a perfect condition, and during operation, the
operator must observe the regulations regarding operation.
• The operator is responsible for ensuring that the machine and its use
do not pose a risk.
• Before working with the machine, operators must familiarize
themselves with all the control elements and their functions, and with
the handling of the machine.
Information
Careful and prudent working is the best way to avoid accidents!
Preface
Table of contents
Index

1-2 BA 418-12 * 1.0 * 418_12_1_Vorwort.fm
1 Preface
Important information about this Operator’s Manual
• The Operator’s Manual and amendments form part of the machine and
must always be available at the place of use of the machine.
• Store this Operator’s Manual in the storage compartment or net
provided for this in the cabin.
• Immediately replace an incomplete or illegible Operator’s Manual by a
new one.
• In addition to the Operator’s Manual, observe and instruct the operator
in all other generally applicable, legal and other mandatory regulations
relevant to accident prevention and environmental protection.
• Our distributors are always available to you for other questions about
the vehicle and about the operator's manual.
• We keep abreast of the latest technical developments and constantly
improve our products. For this reason, we may from time to time need
to make changes to figures and descriptions in this documentation that
do not reflect products that have already been delivered and that will
not be implemented on these machines.
• Technical data, dimensions and weights are only given as an
indication. Responsibility for errors or omissions not accepted.
Explanation of signs and symbols
The indication left or right in the descriptions always refers to the travel
direction of the machine.
Symbols Explanation
•Identifies a general list
1Identifies a list in a table (position numbers)
2
1. Identifies activities that must be performed in a certain
order
2.
➥Identifies results
►Identifies things to be avoided in the warning and
safety instructions
e.g. (50 in) Indications in brackets (...) are US units of measurement

BA 418-12 * 1.0 * 418_12_1_Vorwort.fm 1-3
Preface 1
Explanation of abbreviations
Abbreviation Explanation
(opt) Option
Fig. Figure
ATF Automatic Transmission Fluid
(lubricant)
Order no. Order, item or part number
BG Employer's liability insurance association
BGG Employer's liability insurance association
principles
o/h Operating hours
resp. respectively
approx. approximately (about, circa)
DGUV German Social Accident Insurance
DIN German Institute for Norming
DOC "Diesel oxidation catalytic converter“
(exhaust after-treatment system)
Doc. Document
DPF "Diesel particulate filter"
(exhaust aftertreatment)
EBE Authorization for stand-alone operation
ECS “Emission Control System”
(exhaust-gas treatment system)
ECU
“Electronic Control System Unit”
(electronic control unit for monitoring
and operating electronic components)
EC European Community
EGR
“Exhaust Gas Recirculation” (exhaust
gas recirculation system for combustion
gases - emission reduction)
EN European Norm
etc. et cetera (from Latin), and so forth
EU European Union
poss. possibly
FOPS Falling Object Protective Structure
FeV Driver's license ordinance
FZV Vehicle Admission Ordinance
if nec. if necessary
ISO International Organization for Norming
LED Light Emitter Diode (light diode)
Trucks Trucks
LoF Agriculture and forestry
LWA Sound power level
max./MAX. maximum
min./MIN. minimal, at least
MVCU Multi Variable Control Unit, control unit
No. Number
o.s. or similar
OK okay, alright
Cars Cars
ROPS Roll Over Protective Structure
RZ Ripper tooth
SAE Society of Automotive Engineers,
viscosity class for motor oil
SCR catalytic
converter
"Selective Catalytic Reduction"
(exhaust aftertreatment system)
StVZO German road traffic regulations
SW Quickhitch (loader unit)
etc. et cetera
VDE Association of Electrical Engineers,
Electronic and Information Technology
e.g. for example
cyl. Cylinder
Abbreviation Explanation

1-4 BA 418-12 * 1.0 * 418_12_1_Vorwort.fm
1 Preface
1.2 Warranty and liability
Notice on warranty and liability
Warranty claims can be made only if the conditions of warranty have been
observed. They are included in the General Conditions of Sales and
Delivery for new machines and spare parts sold by the dealers.
Furthermore, the instructions of this operator's manual are to be observed.
Information about maintenance, repairs and spare parts
Operational safety and readiness of the machine do not only depend on
your reliable control, but also on maintenance and servicing of the
machine. This is why regular maintenance and servicing is absolutely
necessary.
Information
Repair work, maintenance or modifications may only be performed by
specifically trained technical personnel or by an authorized service center!
In particular those specified in the maintenance chapter "Information on
maintenance“ and "Maintenance overview.“
Information
Insist on using original spare parts for repairs!
The machine’s permits, certifications, registrations, etc., may be
withdrawn if machine parts/components with a prescribed condition or
quality, or machine parts/components that can put persons at risk during
operation, are subsequently modified or exchanged!

BA 418-12 * 1.0 * 418_12_2_Sicherheit.fm 2-1
Safety 2
2 Safety
2.1 Safety symbols and signal words
Explanation
The following symbol identifies safety instructions. It is used for warning
against potential personal risk or danger.
DANGER
DANGER identifies a situation causing death or serious injury if it is
not avoided.
Consequences in case of non-observance.
►Avoidance of injury or death.
WARNING
WARNING identifies a situation that can cause death or serious
injury if it is not avoided.
Consequences in case of non-observance.
►Avoidance of injury or death.
CAUTION
CAUTION identifies a situation that can cause injury if it is not
avoided.
Consequences in case of non-observance.
►Avoidance of injury.
NOTICE
IMPORTANT identifies a situation that causes damage to the machine if it
is not observed.
►Avoidance of damage to property.
Safety

2-2 BA 418-12 * 1.0 * 418_12_2_Sicherheit.fm
2 Safety
2.2 Behavioral measures and safety instructions
Prerequisites for operation
• The vehicle has been designed and built in accordance with
state-of-the-art standards and the recognized safety regulations.
Nevertheless, its use can cause danger to the operator or other
persons, or damage to the machine.
• Store this Operator’s Manual in the place provided for this in or on the
vehicle. Immediately replace a damaged or illegible Operator’s Manual
and any supplements to it.
• The vehicle must only be operated in accordance with its designated
use and the instructions set forth in this Operator’s Manual.
• The operator and owner are obligated not to put into operation or
operate a damaged or malfunctioning vehicle.
- If a damage or malfunction occurs during operation, put the vehicle
out of operation immediately and secure it against restart.
- Have all malfunctions jeopardizing the safety of the operator or other
persons immediately repaired by an authorized service center.
• Do not put the vehicle into operation or operate it after an accident;
have it inspected for damage by an authorized service center.
- Have the seat belt replaced by an authorized service center after an
accident, even if there is no visible damage.
- Cabin and protective structures
• Remove all dirt, snow and ice from climbing aids (for example from the
handholds, footholds, handrails).
• The owner is responsible for requiring the operating and maintenance
personnel to wear protective clothing and equipment as required by the
circumstances.

BA 418-12 * 1.0 * 418_12_2_Sicherheit.fm 2-3
Safety 2
2.3 Qualification of operating and maintenance personnel
Owner’s duties
• Only allow specifically authorized, trained and experienced persons to
operate, drive and perform maintenance on the vehicle.
• Do not allow persons to be trained or instructed by anyone other than
an authorized and experienced person.
• Have persons to be trained or instructed practice under supervision
until they are familiar with the machine and its behavior (for example,
with the steering and braking behavior).
• Access to the vehicle or vehicle operation is prohibited for children and
persons under the influence of alcohol, drugs or medicine.
• Clearly and unequivocally define the responsibilities of the operating
and maintenance personnel.
• Clearly and unequivocally define the responsibilities on the job site,
also in view of traffic regulations.
• Give the operator the authority to refuse instructions by other persons
that are contrary to safety.
• Have the vehicle serviced and repaired only by an authorized service
center.
Required knowledge of operator
• The operator is responsible for other persons.
• Avoid any operational mode that might be prejudicial to safety.
• The specific national driving license is required.
• The vehicle may only be operated by authorized and safety-conscious
persons who are fully aware of the risks involved in operating the
vehicle.
• The operator and owner are obligated to operate the vehicle only in a
safe and working condition.
• All persons working on or with the vehicle must have read and
understood the safety instructions in this Operator’s Manual before
starting work.
• Follow, and instruct the operator in, legal and other mandatory
regulations relevant to accident prevention.
• Observe and instruct the operator in regulations regarding road traffic
and environmental protection.
• Use only the defined accesses for getting on and off the vehicle.
• Be familiar with the emergency exit of the machine.
Preparatory measures for the operator
• Before starting, check the vehicle whether it can be driven and
operated safely.
• Increased caution may be required if the driver has long hair or wears
jewelry.
• Wear close-fitting work clothes that do not hinder movement.

2-4 BA 418-12 * 1.0 * 418_12_2_Sicherheit.fm
2 Safety
2.4 Operation
Preparatory measures
• Operation is only allowed with correctly installed and intact protective
structures.
• Keep the vehicle clean. This reduces injury, accident and fire hazards.
• Safely store objects you carry with you in the places provided for this
(for example, in the storage compartment, drinks holder).
• Do not carry objects with you that protrude into the operator’s work
space. They can create another danger in case of an accident.
• Observe all safety, warning and information labels.
• Start and operate the vehicle only with the seat belt fastened and only
from the place provided for this.
• Check the condition and the fastening of the seat belt.
Have malfunctioning seat belts and mounting hardware replaced by an
authorized service center.
• Before starting work, adjust the seating position so that all control
elements can be reached and fully operated.
• Perform the personal adjustment at machine standstill only
(for example, of the operator's seat, steering column).
• Ensure that all safety devices are properly installed and functional
before starting work.
• Before starting work or after interrupting work, ensure that the brake,
steering, signaling and light systems are functional.
• Before putting the machine into operation, ensure that nobody is in the
danger zone.

BA 418-12 * 1.0 * 418_12_2_Sicherheit.fm 2-5
Safety 2
Job site
• The operator is responsible for other persons.
• Before starting work, familiarize yourself with the job site.
This applies to, for example:
- Obstacles in the job site and vehicle travel area
- Any barriers separating the job site from public roads
- Soil weight-bearing capacity
- Existing overhead and underground lines
- Special operating conditions (for example, dust, steam, smoke, asbestos)
• The operator must know the maximum dimensions of the machine and
the attachment – see “Technical data”.
• Maintain a safe distance (for example, from buildings, edges of
building pits).
• During work in buildings or in enclosed areas, look out for:
- Height of the ceiling/clearances
- Width of entries/passages
- Maximum load of ceilings and floors
- Sufficient room ventilation (for example, risk of carbon monoxide
poisoning)
• Use existing visual aids to stay aware of the danger zone.
• In conditions of darkness and poor visibility, switch on existing work
lights and ensure that motorists are not blinded by these lights.
• If the existing lights of the vehicle are not sufficient for performing work
safely, ensure additional lighting of the job site.
• There is an increased risk of fire from hot machine parts and exhaust
gases.
Danger zone
• The danger zone is the area in which persons are in danger due to the
movements of the machine, attachment and/or load.
• The danger zone also includes the area that can be affected by falling
material, equipment or by parts that are thrown out.
• Extend the danger zone sufficiently in the immediate vicinity of
buildings, scaffolds or other elements of construction.
• Seal off the danger zone should it not be possible to keep a sufficient
safety distance.
• Stop vehicle operation immediately if persons do not stay clear of the
danger zone.

2-6 BA 418-12 * 1.0 * 418_12_2_Sicherheit.fm
2 Safety
Carrying passengers
• Carrying passengers with the vehicle is PROHIBITED.
• Carrying passengers on/in attachments/tools is PROHIBITED.
• Carrying passengers on/in trailers is PROHIBITED.
Mechanical integrity
• The operator and owner are obligated to operate the vehicle only in a
safe and working condition.
• Operate the machine only if all protective and safety-oriented
equipment (for example, protective structures such as a cabin or
rollbar, removable safety devices) is installed and functional.
• Check the vehicle for visible damage and defects.
• In case of damage and/or unusual behavior, put the vehicle out of
operation immediately and secure it against restart.
• Have all malfunctions jeopardizing the safety of the operator or other
persons immediately repaired by an authorized service center.
Starting the engine of the machine
• Start the engine only according to the Operator’s Manual.
• Observe all warning and indicator lights.
• Do not use any liquid or gaseous starting aids (for example, ether or
starting fuel).
Machine operation
• Start and operate the vehicle only with the seat belt fastened and only
from the place provided for this.
• Put the vehicle into operation only if visibility is sufficient (have another
person guide you if necessary).
• Operation on slopes:
- Travel/work only uphill or downhill.
- Avoid machine travel across a slope, observe the machine’s
permissible inclination (and of the trailer if necessary).
- Keep loads on the uphill side of the vehicle and as close as possible
to it.
- Keep attachments/work equipment close to the ground.
• Adapt the travel speed to the circumstances (for example, the ground
conditions, weather conditions).
• There is increased danger during backward vehicle travel. Persons in
the blind spot of the machine cannot be seen by the operator.
- Ensure that nobody is in the danger zone when you change the
travel direction.
• Never get on a moving vehicle and never jump off the vehicle.

BA 418-12 * 1.0 * 418_12_2_Sicherheit.fm 2-7
Safety 2
Machine travel on public roads/sites
• The specific national driving license is required.
• Observe the national regulations (for example, the road traffic
regulations) during machine travel on public roads/sites.
• Ensure that the vehicle is in compliance with the national regulations.
• In order not to blind other motorists, using the existing work lights
during vehicle travel on public roads/site is prohibited.
• When crossing for example, underpasses, bridges, tunnels, ensure
that the clearance height and width is sufficient.
• The attachment fitted onto the machine must be certified for travel on
public roads/sites (see for example, the registration documents).
• When transferring the machine on public roads, the attachment must
be brought into transport position and emptied if necessary.
• The mounted attachment must be equipped with the mandatory
lighting and protective devices.
• Take measures against unintentional operation of the operating
hydraulics.
• If the vehicle has different steering modes, ensure that the mandatory
steering mode is selected.
Stopping the engine of the machine
• Stop the engine only according to the Operator’s Manual.
• Before stopping the engine, lower the work equipment/attachment to
the ground.
Stopping and securing the vehicle
• Unbuckle the seat belt only after stopping the engine.
• Before leaving the machine, secure it to prevent it from rolling away
(for example, with the parking brake, suitable wheel chocks).
• Remove the starting key and secure the vehicle against unauthorized
operation.

2-8 BA 418-12 * 1.0 * 418_12_2_Sicherheit.fm
2 Safety
2.5 Lifting gear applications
Requirements
• Have loads fastened and the operator guided by a qualified person
having specific knowledge of lifting gear applications and the usual
hand signals.
• The person giving instructions to the operator must stay in visual
contact with the operator when fastening, guiding or removing the load
(maintain visual contact).
• If this not be possible, ask one more person with the same qualifications to
guide.
• The operator may not leave his seat as long as the load is raised.
Fastening, guiding and removing loads
• Follow the applicable specific regulations for fastening, guiding and
removing a load.
• Wear protective clothing and equipment when fastening, guiding and
removing loads (for example a hard hat, safety glasses, protective
gloves, safety boots).
• Do not place lifting and fastening gear over sharp edges or rotating
parts. Loads must be fastened so as to prevent them from slipping or
falling.
• Move loads only on horizontal, level and firm ground.
• Move loads close to the ground.
• In order to avoid oscillating movements of loads:
- Perform smooth, slow movements with the vehicle.
- Use cables to guide the load (do not use hands to guide).
- Bear in mind the weather conditions (for example, the wind force).
- Keep a minimum safety distance from objects.
• The operator may allow the load to be fastened and removed only if
the vehicle and its work equipment are not being moved.
• Danger zones must not overlap with the work zones of other vehicles.

BA 418-12 * 1.0 * 418_12_2_Sicherheit.fm 2-9
Safety 2
Lifting gear applications
• The vehicle must be certified for lifting gear applications.
• Observe the national regulations for lifting gear applications.
• Lifting gear applications are procedures involving raising, transporting
and lowering loads with the help of lifting and fastening gear.
• The help of an accompanying person is necessary for fastening,
guiding and removing the load.
• There must be nobody under the load.
• Stop the vehicle immediately and stop the engine if persons enter the
danger zone.
• Use the machine for lifting gear applications ONLY if the mandatory
lifting gear (for example, a joint rod and load hook) and safety
equipment (for example, optical and acoustic warning devices, hose
burst valve, stability table) is installed and functional.
• Use only lifting and fastening gear certified by a test/certification body,
observe the inspection intervals (Use only chains and shackles. No
belts, slings or cables).
• Do not use any lifting and fastening gear that is dirty, damaged or not
of sufficient size.
• Do not interrupt the work process with a load attached.

2-10 BA 418-12 * 1.0 * 418_12_2_Sicherheit.fm
2 Safety
2.6 Trailer operation
Trailer operation
• The vehicle must be certified for trailer operation.
• Observe the national regulations for trailer operation.
• The specific national driving license is required.
• Carrying passengers on/in trailers is PROHIBITED.
• Observe the maximum permissible vertical and trailer load.
• Do not exceed the permissible trailer speed.
• The machine requires a front ballast for trailer operation.
• Trailer operation with the towing gear of the machine is prohibited.
• Trailer operation changes the machine’s operating behavior, the
operator must be familiar with this and act accordingly.
• Bear in mind the machine’s steering mode and the trailer’s turning
circle.
• Before hitching/unhitching the trailer, secure it to prevent it from rolling
away (for example, with the parking brake, suitable wheel chocks).
• There must be nobody between the vehicle and the trailer when
hitching a trailer.
• Hitch the trailer onto the vehicle correctly.
• Ensure that all equipment works correctly (for example, the brakes,
lights).
• Before starting vehicle travel, ensure that nobody is between the
vehicle and the trailer.
• If the vehicle has no EC license for agricultural and forestry applica-
tions, only the machine's own attachments may be transported with a
trailer.
• Start machine travel carefully, in particular on slopes.