AeroBed R2110 AU / RDV User manual

Made in China.
PUMP R2110 AU / RDV
INSTRUCTION MANUAL

1
WARNINGS AND IMPORTANT SAFETY NOTES
CAREFULLY READ THE INSTRUCTION MANUAL BEFORE USE.
Thank you for purchasing our luxury AeroBed® product. You can expect premium quality,
innovation and durability from every AeroBed®product.
You are about to enjoy the comfort of the AeroBed® product, the finest alternative
sleeping system available anywhere. It is your responsibility to read and always follow
the safety, care and maintenance instructions for your new product. Always instruct and
supervise others on the proper use, maintenance and safety of your bed.
IMPORTANT: Preparation of your bed requires no tools. Use of
tools may damage your bed.
Read, follow and retain this instruction manual for future reference.
CUSTOMER QUALITY ASSURANCE
AeroBed®has gone to every effort to ensure that your product is of superior quality and
meets the highest standards for convenience comfort and durability. If for any reason
your AeroBed®product is not working properly you will be entitled to a full repair in
accordance with the warranty.
However, please note that you will be asked to return your product with your proof of
purchase for testing and if a fault cannot be found you will be charged a service fee.
Bed
• Adult supervision is required. This is not a lifesaving device.
Do not leave children unattended in or around water.
• Do not use this airbed as a raft or a boat.
• Do not inflate with an air compressor.
• Keep away from fire.
• This product is delivered with a carry bag. Keep it away from
children. Danger of suffocation!
• This bed is not designed for use by children under 3 years of
age. Children under the age of 3 may suffer serious or fatal
injury through suffocation, falling from the bed or becoming
trapped between the bed and a wall or other objects.
• Product is for indoor use only.
• Fill with cold air only.
• Never use a hair dryer to inflate, this could cause melting.
• Do not over inflate.
• Bursting items can cause serious injury.
• Inflate the airbed until most of the wrinkles in the material are
gone and the bed feels firm to the touch.
WARNING

2
Caution: Air temperature and weather do affect the air pressure in inflatable products. In
cold weather your airbed will lose some pressure due to the fact that the air will contract.
If this occurs, you may want to add a little air to improve your airbed’s performance.
However, in hot weather, the air will expand. You must let some air out to prevent the
airbed from failing due to overpressure.
You should avoid exposing your airbed to extreme temperature (hot or cold).
• Do not let inflatable products come in contact with sharp,
pointed objects that may puncture the plastic material.
• This mattress is not intended for infants or persons with
limited mobility. They may roll off of the mattress and
become entrapped between the mattress and a wall.
• Product is intended for use as an indoor bed only. Do not step
or jump on bed or use as a trampoline. Bed may puncture.
• Place bed in a safe area before use, making sure that there are
no sharp edges, steps, drops, or breakable items nearby. Use
on flat surfaces only. Bed may tip over on uneven surfaces.
• This bed is made of plastic and therefore may melt or burn if it
comes in contact with any flame or heat source. Do not place
it near or against heaters, open flame or other hot objects.
• This is not a water toy. Use as a mattress only.
Pump
• Adult supervision is required for inflation, deflation and
maintenance. Follow all safety instructions to avoid
serious injury.
• This is an electrical product - not a toy. To avoid risk of fire,
burns, injury, and shock, it should not be played with or
placed where small children can reach it. Do not use in or
around water.
• This appliance is not intended for use by persons (including
children) with reduced physical,sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not
play with the appliance.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
WARNING

3
IMPORTANT: THE FIRMNESS OF YOUR AIRBED MAY
DECREASE AFTER YOU INITIALLY INFLATE IT. YOUR AIRBED
IS NOT LEAKING. THIS IS NORMAL AND IS CAUSED BY THE
MATERIAL STRETCHING AFTER THE AIRBED IS INFLATED.
ADD AIR TO MAINTAIN YOUR DESIRED FIRMNESS.
NOTE: BED MUST BE AT ROOM TEMPERATURE PRIOR
TO INFLATING OR IT MAY CAUSE AIR LEAKS. PRESSURE
CAN VARY DEPENDING ON ROOM TEMPERATURE AND
CONSUMER WEIGHT.
1. Place your rolled-up bed on the floor free of obstructions or sharp objects.
2. Make certain the Quick Release Valve is closed. Bed should be stored with valve in
the closed and latched position. If the Quick Release Valve is open, close it by using 2
thumbs to push cover and snap into valve. Be careful to avoid pushing valve cover to
the right or left as it snaps into the valve opening.
3. Remove AC plug and cord from plastic bag and shrink wrap.
INFLATION
SERVICING OF DOUBLE-INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated product, nor is a
means for grounding to be added to the product. Servicing a double-insulated product
requires extreme care and knowledge of the system, and is to be done only by qualified
service personnel. Replacement parts for a double-insulated product must be identical to
the parts they replace.
IMPORTANT: TIME TO FULLY INFLATE IS APPROXIMATELY 4
MINUTES. TO AVOID OVERHEATING AND PUMP DAMAGE, DO
NOT LET PUMP RUN CONTINUOUSLY FOR MORE THAN
5 MINUTES.
• Pump is not intended for continuous use. Pump may stop
working or overheat if it is used for extended periods of time.
Do not use pump continuously for more than 5 minutes.
Once pump is overheat, let it rest for 30 minutes for restart.
• Do not attempt to disassemble, repair, or service the pump.
No serviceable parts are contained inside. Contact Consumer
Service Department for repair or servicing information.
• Avoid splashing the pump with water.
• Never overinflate an inflatable item.
• Unplug product when not in use.
• Do not block air intake during operation; this could damage
the motor.
• Always monitor the pump during use.

4
4. Plug into any standard polarized 240 Volt AC electrical outlet.
This product electrical rating: 230 VAC, 50 Hz, 0.55 A.
Note: Because this is an electric device,
ensure your hands are dry when connecting
the cord set to the pump or plugging it into
the wall outlet.
5. Turn dial on pump to “Inflate” position. Bed will inflate hands-
free. When desired firmness is reached, turn dial to neutral
position (Off).
6. To adjust firmness level, slowly turn dial on pump to silent
adjust position (see figure Adjust). Pump will slowly release
air. Turn dial to neutral position once you reach your desired
firmness level. To add more air, repeat Step 5.
IMPORTANT: PUMP HAS RESETTABLE FUSE
WITH AUTO SHUT-OFF FEATURE. IF PUMP
RUNS FOR APPROXIMATELY 5 CONSECUTIVE
MINUTES, THE AUTO SHUT-OFF FEATURE WILL
ENGAGE WHICH WILL ALLOW THE MOTOR TO
COOL. PUMP WILL AUTOMATICALLY RESET
ITSELF IN APPROXIMATELY 30 MINUTES.
This is the closed position. Open Quick Release Valve. Close valve using 2 thumbs.
Adjust
Make sure product is completely dry and clean before deflating and storing.
1. To deflate your AeroBed®product, open the Quick Release Valve.
2. For most compact storage, close Quick Release Valve, plug
power and turn dial to Deflate. Once excess air is released, turn
dial to neutral position (Off).
3. Roll or fold the AC cord and secure it. Fold sides of bed into the
center along its length. Tightly roll and place bed in convenient
carry bag for easy storage and transport.
4. Store your bed in a clean, dry place at room temperature
(above 50 °F / 10 °C). Storing your bed under 50 °F (10 °C) and
over 100 °F (38 °C) may affect its performance and will not be
covered under warranty.
DEFLATION AND STORAGE

5
Very rarely, your AeroBed®product may fail to inflate properly.
Should this occur, please use the following check list.
1. If your AeroBed®product doesn’t appear to be inflating:
• Make sure the Quick Release Valve is closed and
locked securely.
If the valve is open, close it by using 2 thumbs to push
cover firmly into valve. Be careful to avoid pushing valve
cover to the right or left as it snaps into valve opening.
• Make sure your bed is plugged into an active
electrical outlet.
TROUBLESHOOTING
Bed
We recommend that you do not let the plush surface of your AeroBed®product get wet.
Repeated exposure to water or other liquids may cause damage to the plush surface
that will not be covered by your warranty. Should liquid come in contact with the plush
surface, blot liquid dry and use a damp cloth to remove any stain. Let surface air
dry completely.
You may clean the PVC on the sides and bottom of your AeroBed®product with a mild
dishwashing detergent or household cleaner. Do not use strong chemicals or other
compounds. Allow your bed to air dry completely after cleaning and before storing.
Cover / Valance (if included)
Machine wash separately in warm using mild soap or detergent. Tumble dry on LOW
HEAT. Remove immediately after drying.
CLEANING
1. Inspect your AeroBed®product prior to each use.
2. Keep your AeroBed®product away from any sharp objects. Large cuts or snags may
not be repairable and will not be covered by your warranty.
3. When not in use, store your AeroBed®product in a clean, dry place out of extreme
temperatures. Product must be at room temperature prior to inflating.
4. Do not store your AeroBed®product folded inside sofa beds or roll-aways. This may
cause damage to your bed that will not be covered under your warranty.
5. In case of incidental damage to your bed, a repair patch has been included.
Please follow repair instructions carefully.
CARE AND MAINTENANCE
5. Do not store your bed folded inside sofa beds or roll-aways. This
may cause damage to your bed and will void your warranty.
6. If a mattress cover and/or valance is included with your bed, it/
they may be removed after deflation. Alternatively, you may store
your product with the mattress cover and/or valance on the bed.
Wrinkling may occur.

6
2. If air leakage occurs:
Carefully inspect the soft round gasket on inside of Quick Release Valve cover. Make sure
there is no dirt or debris, cuts, nicks or tears to the gasket. If there is dirt or debris; clean
and use. If cut, nicked or torn, call our Customer Service Department.
Carefully inspect the bed for a puncture or tear. If damaged, repair using the repair
patch included with your bed. Follow instructions and warnings printed on label.
3. If trouble persists, please phone our Customer Service Department for assistance.
WARRANTY
EXPRESS WARRANTY
Coleman Brands Pty. Ltd. (“Coleman”) warrants that this product will be free from defects
in material and workmanship for the following periods: the pump and valve, five (5) years
from the date of original purchase and the mattress, one (1) year from the date of original
retail purchase. Coleman will, depending on the circumstances, refund, repair or replace
this product or any component of the product found to be defective during the warranty
period. Replacement will be made with a new or remanufactured product or component.
If the product is no longer available, replacement may be made with a similar product of
equal or greater value. To the extent permitted by law and subject to your non-excludable
rights under the Australian Consumer Law (Schedule 2 to the Competition and Consumer
Act 2010 (Cth)) and the New Zealand Consumer Guarantees Act, which are not limited to
a one (1) year period, this is your exclusive remedy for any breach of this limited warranty
or for any other claims otherwise relating to this limited warranty.
In Australia, our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. The benefits provided under
this warranty are in addition to and do not affect purchaser’s statutory rights under the
Australian Consumer Law or other rights at law.
This warranty is valid for the original retail purchaser from the date of initial retail purchase
and is not transferable. Please keep your proof of purchase documentation, such as the
original sales receipt or the relevant credit card statement. Proof of purchase is required
to obtain warranty performance. Coleman dealers, Coleman service centres, or retail
stores selling Coleman®products do not have the right to alter, modify or in any way
change the terms and conditions of this warranty. The warranty is valid only for products
that are purchased new and unused in Australia and New Zealand, from Coleman or
Coleman dealers or retailers.
WARRANTY EXCLUSIONS AND LIMITATIONS
THE AUSTRALIAN CONSUMER LAW PROVIDES CONSUMERS WITH CERTAIN
‘CONSUMER GUARANTEES’. THESE GUARANTEES APPLY WHERE THE GOODS AND
SERVICES COLEMAN SUPPLIES TO YOU ARE OF A KIND ORDINARILY ACQUIRED
FOR PERSONAL, DOMESTIC OR HOUSEHOLD USE OR COST LESS THAN $40,000,
AND IN THE CASE OF GOODS, ARE NOT RE-SUPPLIED BY YOU. NOTHING IN THIS
LIMITED WARRANTY EXCLUDES, RESTRICTS OR MODIFIES RIGHTS WHICH YOU
HAVE UNDER THE AUSTRALIAN CONSUMER LAW IN RESPECT OF THE CONSUMER
GUARANTEES AND ALL OF THE PROVISIONS IN THIS SECTION ARE TO BE READ
SUBJECT TO THE AUSTRALIAN CONSUMER LAW.

4010046523 (ECN20060957-02)
This warranty does not cover: (a) normal wear of the product and/or its parts; (b) parts
that are not genuine Coleman®parts, consumables, lost parts and accessories; (c)
damage resulting from any of the following: negligent use or misuse of the product,
commercial use of the product, use contrary to the operating instructions; disassembly,
repair or alteration by anyone other than Coleman or Coleman service centre, the use
of a part other than a genuine Coleman®part; or (d) acts of God, such as fire, flood,
hurricanes and tornadoes.
To the extent permitted by the Australian Consumer Law, the Competition and Consumer
Regulation 2010 and the New Zealand Consumer Guarantees Act, Coleman’s liability is
limited, depending on the circumstances, to refund, replacement or repair of Coleman®
products or components.
For the avoidance of doubt, any and all other warranties or conditions which are not
guaranteed by the Australian Consumer Law, the Competition and Consumer Regulation
2010 and the New Zealand Consumer Guarantees Act and which are not expressly
included in this warranty as additional warranties or conditions are expressly excluded,
including liability for incidental or consequential damages caused by the breach of any
express or implied warranty or condition.
MAKING A WARRANTY CLAIM - RETURN TO COLEMAN FOR REPAIR
Take the product to an authorised Coleman retailer or Coleman service centre as soon
as the warranty claim arises. You may locate the nearest authorised Coleman retailer or
Coleman service centre by visiting www.coleman.com or calling 1800 224 350 or
+ 61 2 8762 5000. Please ensure that you provide a written description of the problem
with the product, together with your contact name, address and telephone number and
proof of purchase.
Subject to the applicable consumer laws in your jurisdiction, you must pay for the
costs of transporting the product, including packaging, freight and insurance costs, to
an authorised Coleman retailer or Coleman service centre for warranty service. If the
warranty claim is substantiated and accepted by Coleman, Coleman will at its cost, repair
or replace any product or parts and return the product to you. Additionally, if the warranty
claim is substantiated and accepted by Coleman, Coleman will reimburse you for the
costs of transporting the product to an authorized Coleman retailer or Coleman service
centre. Coleman reserves the right to seek reimbursement for any costs and expenses
incurred for a warranty claim if the product is found to be in good working order.
Please call or write us with any comments or questions:
Coleman Brands Pty. Ltd.
Unit 5-6, 13 Lord Street,
Botany NSW 2019
Australia
Telephone: [phone]
Email: [email protected]
www.colemanaustralia.com.au
Warning: Due to our policy of continual product development, the company reserves the right to alter
or modify this product without prior notice.