Aerpro APWC100 User manual

Type-C Input port
Charging pad contact
How to use your Wireless Charging Pad
1. Connect supplied Type-C data cable to the input port of the charging pad
2. Connect supplied USB end of the Type-C data cable (Included) to a USB
car charger or USB power adapter (Not Included).
Specifications
Power: 10W
Input Voltage: 5V/2A; 9V/1.67A
Output Voltage: 5V/1A; 9V/1.12A
Over voltage/temperature protection
Type-C Input
Charging efficiency: ≤70%
Transmission distance: ≤6mm
Size: 185 x100 x 26 mm
Weight: 180g
Can accept 18W or higher wall
power charger (not included)
Thank you for purchasing the APWC100 Wireless Charger/Power Bank.
It is compatible with all Qi enabled devices like Samsung S7/ S8, S9,
S10, iPhone8, iPhone8 plus, iPhoneX, etc.
For optimum performance and safety, please read this manual carefully
before using this product.
SILICONE WIRELESS CHARGING
SMARTHPHONE PAD
APWC100

3. Place your mobile device (face up) on to the Wireless Charging Pad
4. Charge icon will appear on your mobile device for successful connection.
NOTE:
1. The car charger or adapter used to power the Wireless Charging Pad that
outputs the proper voltage is required (Not included). It should meet QC2.0,
QC3.0 or QC4.0 standard. Aerpro Models APCC210 & APCC220 (In-Car
Chargers); APHC210 & APHC220 (240V Wall Chargers) meet the
requirements, sold separately.
2. The connected power car charger or adapter used must output 5V/2A or
9V/1.67A. Using a charger or adapter with a lower output may result in
malfunction or overheating.
3. Quick Charge 3.0 power charger or adapter required for fast charge mode
4. Charging speed may vary depending on device specifications, input voltage
and environment.
5. Phone cases or metal plates for magnetic attachment may interfere with
wireless charging.
6. It’s normal for the charger and your device to get hot whilst charging. It will
get even hotter if the device is also being used while charging.
Technical assistance
If you need assistance setting up or using your Aerpro product now or in the
future, call Aerpro Support Australia TEL: 03 – 8587 8898 FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST
If you would like to download a digital copy of this manual, or other Aerpro
manuals/software, please visit the http://aerpro.com website.
This manual is considered correct at time of printing but is subject to change.
For latest manuals and updates refer to the website.
www.aerpro.com