Aerpro APWC155 User manual

WIRELESS CHARGING
SMARTPHONE PAD
APWC15 5
Specifications
Qi certified
Wireless output: 15W/10W/7.5W/5W
Input Voltage: 12V/1.67A; 9V/1.67A; 9V/1.34A
Output Voltage: 9V/1.67A; 9V/1.12A; 9V/0.83A; 5V/1A
Charging efficiency: ≤65%
Transmission distance: ≤6mm
Size: 126 x 65 x 7 mm
Weight: 50g
1. Input port
2. Wireless transfer contact area
3. Wireless charging indicator

How to use your APWC155
1. Connect supplied USB cable to the input
port of the wireless charging pad.
2. Connect opposite end of the cable into a
USB car charger or USB power adapter
(Not Included).
3. Wireless charging indicator LED will turn
red once plugged into a power source.
4. The wireless charging pad is ready for your
smartphone or device.
Can accept 18W or higher wall
power charger (not included)

Charging your device from the wireless
charging pad
1. Place your QI enabled device on the
transmitter of the wireless charging pad.
2. When successfully charging, the wireless
charging indicator LED will turn blue.
3. Once your device is fully charged the
wireless charging indicator LED will turn off.
4. If the wireless charging indicator LED flashes
blue then there is a problem with the
connection. Reposition your device to fix the
problem.

Charging indicators
Red light on: Wireless charging pad
stand-by
Blue light on: Wireless charging pad
successfully charging device
Light off: Wireless charging device fully
charged
Flashing Blue light on: Wireless charging
unsuccessful (Problem)

NOTE:
1. The car charger or adapter used to power
the Wireless Charging Pad that outputs the
proper voltage is required (Not included). It
should meet QC2.0, QC3.0 or QC4.0
standard. Aerpro Models APCC210 &
APCC220 (In-Car Chargers); APHC210 &
APHC220 (240V Wall Chargers) meet the
requirements, and can accept 18W or higher
(sold separately).
2. The connected power car charger or
adapter used must output 5V/2A or
9V/1.67A. Using a charger or adapter with a
lower output may result in malfunction or
overheating.
3. Quick Charge 3.0 power charger or
adapter required for fast charge mode
4. Charging speed may vary depending on
device specifications, input voltage and
environment.
5. Phone cases or metal plates for magnetic
attachment may interfere with wireless
charging.
6. It’s normal for the charger and your device
to get hot whilst charging. It will get even
hotter if the device is also being used while
charging. Allow charger to cool if too hot.

Inclusions
Wireless charging pad
Micro USB charging cable
User manual
Technical assistance
If you need assistance setting up or using
your Aerpro product now or in the future, call
Aerpro Support Australia TEL: 03 – 8587
8898 FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST
If you would like to download a digital copy of
this manual, or other Aerpro
manuals/software, please visit the
http://aerpro.com website.
This manual is considered correct at time of
printing but is subject to change. For latest
manuals and updates refer to the website.
www.aerpro.com