Aerpro CHVL02 User manual
C
H
VL02
Volvo Steering Wheel Control Interface
INSTRUCTION MANUAL
a
rpr
ABOUT THIS PRODUCT ...
C
H
VL02
Product Contents
2
a
rpr
Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for installa-
tion. The place of installation must be free of moisture and away from heat sources.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Aerpro can not be held responsible for the installation of this product.
Technical Support
Aerpro want to provide afast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Aerpro, try to provide as
much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: intranet.tdj.com.au/
support/
FITTING GUIDE
Important Note: This step must be completed before connecting power to the
interface. Failure to so do may result in no steering wheel control function.
ww
a
e
rpr
o.com 3
4
FITTING GUIDE
Wire Colour Function Wire Colour Function
ww
a
e
rpr
o.com
8. Disconnect the vehicle display and plug in the male green vehicle display
connector. Take the disconnected display lead and plug this into the female
green vehicle display connector
9. Test head unit for correct operation and reassemble the dash.
STEERING WHEEL CONTROL FUNCTIONS
1. Track -
2. Track+
3. Pick Up
4. Hang Up
5. Volume+
6. Volume -
a
rpr
5
6
5
