Aethra SV1204 User manual

The SV-SIP Family of Integrated
Access Devices (IADs)
enables Network Operators
and ISPs to effectively deploy
Next Generation Networks
based on Voice over
IP technology offering to
Small and Medium Businesses
integrated broadband data and
carrier-class voice services over
a single copper pair either on
ADSL2/2+ (SV12xx-SIP models)
or ShDSL (SV22xx-SIP models).
Fast integration and “Five-9s” service availability
The SV-SIP IADs guarantee seamless installation and the
highest degree of compatibility with every type and brand of
legacy telephony devices (faxes, phone sets, answering
machines, modems). An optional fully managed back-up
battery unit is also available for service continuity in case of
mains faults. Moreover, one of the POTS ports can be set as
FXO thus guaranteeing basic call capabilities in case of IP
connectivity break down.
Full IP services
The SV-SIP Family provides advanced routing and bridging
capabilities also offering firewall functionality to prevent
unauthorized hosts from externally accessing the internal LAN.
The SV supports a variety of VPNs to protect data exchanged
over a public IP network among branch offices and the
corporate headquarters.
Wireless option
The SV-SIP-W Family is compliant to 802.11b/g standards.
Using 802.11g, the device data transmission reaches up to
54Mbps. Wireless security protocols include Wired Equivalent
Privacy (WEP), Wi-Fi Protected Access (WPA1 and WPA2) and
IEEE 802.1x authentication.
VoIP IAD, ADSL2/2+ or ShDSL
WiFi & V/X factory options 8 simultaneous
voice calls - POTS and ISDN BRI mix
Next Generation Networks introduction
Ideal solution for integrating high-quality voice
and data services over IP networks for SOHO
and SME customers at superior cost savings
Flexible
Mixed voice ports configuration and
multiple WAN connectivity options allow
Operators to optimise their offer

All information provided by Aethra in this datasheet is believed to be accurate. Aethra SpA reserves the right to discontinue and change specifications and prices at any time without prior notice. Copyright ©
2005 Aethra SpA - all rights reserved. For Further details about technical specifications please see “Products” on our website www.aethra.com.
AETHRA® SpA
via Matteo Ricci, 10
60126 Ancona (Italy)
Telephone [phone]
Fax [phone]
Video 1 +39.071.2189704
Video 2 +39.071.2189701
Beijing Hong Kong London Madrid
Mexico City Paris Miami São Paulo
Shanghai Shenzhen
Email:[email protected]
www.aethra.com
Leds Indicators
• Power
• Ready
• Emergency
• ISDN (2 or 4)
• POTS (none or 4)
• LAN
• Wi-Fi
• Internet
• ADSL/ShDSL Line
Physical interfaces
• POTS ports: 4 FXS and 1 FXO with RJ-11
and spring connectors (SVx242 models)
• ISDN-BRI ports: 2 (SVx242 models) or 4
(SVx204 models) with RJ-45 connectors
• 4 switched 10/100bT Ethernet ports with
RJ-45 connectors
• Sync IN/OUT ports with 2 Stereo Jack 3,5 mm
connectors
• 1 serial port V35 / RS-449 (V.36) / V.11 DTE
up to 2 Mbps (factory setup on SV12xx-VX models)
• 1 console port with MiniDIN 8P connector
ADSL Network interfaces
• ADSL2/2+ interface (SV12xx models)
• ITU-T G.992.1 (g.dmt), G.992.2 (g.lite)
• ITU-T G.992.3 (ADSL2 or g.dmt.bis)
• ITU-T G.992.4 (g.lite.bis)
• ITU-T G.992.5 (ADSL2+)
• Downstream line rate: up to 24 Mbps
• Upstream line rate: up to 1 Mbps, up to 3.5 Mbps
with Annex M
ShDSL Network interfaces
• ShDSL interface (SV22xx models)
• ETSI TS 101 524,
• ITU G.991.2 Annex B
• Line rate up from 200 kbps to 2312 kbps
Voice Interfaces
• POTS (FXS, FXO)
- Compliant to Q.552 requirements
- Port impedance: real 600ø or complex Euro values
- Low distortion ringing voltages
- Diagnostic features
- One of the FXS is associated to the FXO port
• ISDN-BRI
- Fully compliant to L1 standards (ETSI ETS 300 012)
- PP and PMP configuration
Voice processing
• Voice Codes
- ITU-T G.711 (A-law, Ì-law)
- ITU-T G.729a (factory setup option)
- ITU-T G.726 (VoATM mode only)
- Transparent pass-through
• ITU-T G.165/G.168 echo cancelation
• Voice Activity Detection and Comfort Noise Generation
• RTP/RTCP (RFC 1889)
• 8 Voice Channels VoIP
• 8 Voice Channels VoATM
Signalling
• Euro ISDN EDSS-1 / ETSI BRI/NET3
• ETS 300 125 (ITU-T Q.921)
• ETS 300 102-1 (ITU-T Q.931)
• Q-SIG (PSS-1)
• SIP 2.0 according to RFC 3261 (TCP or UDP transport)
• En-block and Overlap sending
• ISDN speech, audio and data (Fax Gr 4, UDI 64, RDI 64)
• DTMF detection and carrying (RFC2833), DTMF info
• Local Generation of:
- Dial tone
- Ring back tone (180 Ringing reply)
- Call Waiting tone
- Busy tone
- Fast Busy tone
Fax and modem support
• T.38 fax relay
• Automatic G.711 Fax and Modem Pass-Through
Supplementary services1
• Locally managed2 or Softswitch-based
- Call hold
- Consultation call
- Call waiting
- Call Forwarding
- Caller Identity Presentation (CLIP)
- (DTMF and FSK based)
- Identity restriction
- Call transfer
- 3party conference (POTS only)
- MSN
DDI Bundle
• GNR Management
• Multi-port to one number association and vice versa
• Multi-port to multi-number range association
IP Functions
• IP Routing
- RIP v1/v1c/ v2, BGP, OSPF
- Enhanced Network Address and Port Translation
(NAPT) engine, with multiple ALGs (including SIP,
TFTP and H.323)
- DHCP Server/Client/Relay, DHCP Learning
- Multicast IGMP v1/v2/v3, PIM
• Routing Filtering Redistribution
• Firewalling
- Extended Access Lists
- Stateful Packet Inspection including Denial of
Service attacks
• IP Services
- DNS proxy
- VPN (GRE, IP, PPTP server/client)
- IPSec with DES, 3DES and AES
- ICMP, IGMP snooping, Telnet, TFTP
- Layer 3 QoS according to DiffServ model
(RFC2474, RFC2475)
- Priority based queuing (Absolute Priority, WFQ, RED)
- Extensive monitoring, tracing and troubleshooting
facilities
Ethernet services
• Self Learning Bridge with up to 1k MAC addresses
and automatic ageing
• Full-Duplex IEEE 802.3x
• Half-Duplex back pressure flow control
• Automatic MDI/MDI-X crossover
• Broadcast/Multicast storm protection
• VLANs (802.1Q and 802.1p) port based management
• Tag/Re-Tag/Untag
- Trunking (VLAN multiplexing)
- Priority based queuing
Frame relay on V/X (factory setup)
• QoS Management
• FRF.12
• LMI: Q.933a, T1.617
• Multiprotocol over Frame Relay (RFC1490)
• DLCI bundling
ATM
• Services
- Up to 8 VCCs
- Class of Services (CBR, VRB-rt, VBR-nrt, UBR+, UBR)
- Voice and Data packets over different VCCs
(VC bundling)
- Selective CLP marking
- F4/F5 OAM cells, AIS and RDI
- ATM: ITU T-I.361, ITU T-I363.5, ITU T-I432, ITU TI610,
ITU T-I731
• Access protocols
- IP over AAL-5, Ethernet over AAL-5 (RFC2684)
- PPP over AAL-5 (RFC2364)
- PPP over Ethernet (RFC2516)
- LLC/SNAP and VC encapsulation
Authentication
• Client side PAP/CHAP/MS-CHAPv1
and v2 authentication
• Basic and Digest schemes (RFC2617)
WiFi option (factory setup)
• IEEE 802.11b/g
• WEP encryption (64/128-bit)
• WPA1 and WPA2
• IEEE 802.1x authentication
• MAC filtering
Service resiliency
• ISDN backup
• VRRP (RFC2338)
• Dial on Demand Routing
MANAGEMENT & CONFIGURATION
• Password Protected Access
- 2 login levels
- AAA and local authentication
• Local Management
- Console port
- Extensive CLI
- Windows®based wizard for configuration
and firmware download
• Remote Management
- CLI (internal Telnet Server)
- HTTP (embedded WEB Server)
- SNMP Agent (v1, v2c)
- Syslog
- Network Performance Monitor
- Ping MIB
• Firmware upgrades: Local and Remote
(TFTP client embedded)
Models
• ADSL2+
- SV1242, 4 POTS plus 2 ISDN BRI
- SV1204, 4 ISDN BRI
- SV1204-VX, 4 ISDN BRI, 1 VX
- SV1242-VX, 4 POTS plus 2 ISDN BRI, 1 VX
- SV12xx-W, POTS and/or ISDN, WiFi-AP
• ShDSL
- SV2242, 4 POTS plus 2 ISDN BRI
- SV2204, 4 ISDN BRI
- SV22xx-W, POTS and/or ISDN, WiFi-AP
Environmental range
• Temperature
- Operating: 0° to 40°C (32° to 104°F)
- Non-Operating: -35° to 70°C (-31° to 158°F)
• Humidity: Operating: 0 to 95% non- condensing
• Protections: ITU - K21
• Safety: EN 60950
• EMC: ETSI EN 300 386 V1.2.1
• Operating environmental conditions:
ETS 300 019-1-3, class 3.2
• Transport environmental conditions:
ETS 300 019-1-2, class 2.2
Power
• External Class II AC/DC network adapter
• Input voltage from 90 to 250 Vac.
• Power backup unit (PBU)
1Supplementary Services management is not yet
fully standardised by international bodies and their
implementation could be subject to revisions
2Depending on the specific service, a common
implementation between the IAD and the Softswitch
needs to be agreed
Technical Specifications
Code 071073048GB Rev. 0 (10/07)