AFRISO FloorControl RT01 User manual

AFRISO-EURO-INDEX GmbH
Lindenstr. 20
D-74363 Güglingen
www.afriso.com
Service AFRISO
Tel. [phone]
[email protected]
INSTALLATION AND OPERATION MANUAL 953.011.0093
FloorControl RT01
D-BAT room thermostat
Work on electrical circuits should only be carried out by an authorised electrician.
Do not allow the device to come into contact with water.
Before dismantling the housing, disconnect the wiring box or other controlled device
from the power supply.
Do not make any modications to the device.
WARNING!
Description of the device
Compatibility with wiring boxes
Wall mounting
Dimensions Electrical connections with
FloorControl WB01 D-8 box
The FloorControl RT01 thermostat is acompact device with
adisplay and built-in temperature sensor that enables precise
temperature setting in asingle room or multiple rooms.
The thermostat is powered by two AAA batteries.
The FloorControl RT01 room thermostat is connected
to the FloorControl WB01 D-8 underoor heating wiring box
to control the oor heating system.
The RT01 thermostat can also be used to turn on/off any
heating/cooling device.
The FloorControl RT01 D-BAT thermostat (Art. No. 86 018) can be connected to the WB01 D-8-230
box (power supply 230 V AC - Art. No. 86 013) or to the WB01 D-8-24 box (power supply 24 V DC -
Art. No. 86 014).
The thermostat’s mounting location must provide protection from
the weather. The RT01 thermostat is designed for wall mounting.
The thermostat is xed to the wall through the mounting holes (A) in
the back of the housing. To disconnect the rear part of the housing from
the thermostat, they must be dismantled and released from the latches.
1
Display
Current room
temperature
+
_
A
NO COM NC
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
ADT
user 2020-05-12
Zaprojektowanyprzez Sprawdzonyprzez Zatwierdzonyprzez Data
1 / 1
Wydanie Arkusz
Data
80,60
80,60
27,33
14,73
R1
,0
0
R
2
R
5
7,00
7
7

4
8
22
10,6 60
60
37,8
37,8
77,1
71,6
81
81
57,1
10,97 34,29
11,51
18,16
11,40 16,92
22,2
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
ADT
user 2020-05-12
Zaprojektowanyprzez Sprawdzonyprzez Zatwierdzonyprzez Data
1 / 1
Wydanie Arkusz
Data
80,60
80,60
27,33
14,73
R1
,0
0
R
2
R
5
7,00
7
7

4
8
22
10,6 60
60
37,8
37,8
77,1
71,6
81
81
57,1
10,97 34,29
11,51
18,16
11,40 16,92
22,2

Parameter/part Value/description
General specication
Dimensions (Wx H x D) 81 x 81 x 22 mm
Ambient temperature 5÷50ºC
Temperature setting range 5÷35ºC
Sensor measurement error +/- 0.5ºC
Electrical parameters
Power supply 2xAAA 1.5 V batteries (LR03)
Load capacity of the contact 1 A/250 V AC
Permissible cable type 2x0,5 mm2
Technical data
Operation
2
Hysteresis - permissible deviation from setpoint temperature. Hysteresis is to prevent
undesirable clocking of the controlled device with small temperature uctuations.
Hysteresis setting is possible in the range of 0.2÷4°C.
Entering the
menu: hold
down “+”
and “-”
Sensor compensation. Compensation should be carried out if the room temperature
measured by the sensor of the RT01 thermostat is signicantly different from the actual
temperature.
Key lock.
Battery status.
Resetting to factory settings.
Decommissioning, scrapping
1. Disconnect the power supply from the device.
2. Remove the device.
3. In order to protect the environment, the decommissioned appliance must not be disposed of with
unsorted household waste. The device must be delivered to asuitable disposal point.
RT01 thermostats are made of recyclable materials.
Guarantee
Customer satisfaction
Addresses
Product warranty in accordance with the general conditions of sale and delivery. The guarantee becomes void as
aresult of arbitrary alterations or installation not in accordance with this installation and operation manual.
For AFRISO, customer satisfaction is the most important thing. If you have any questions, suggestions or problems with
the product, please contact us.
The addresses of companies representing the AFRISO group worldwide can be found at www.afriso.com.
Switching between heating mode and cooling mode .
Heating mode: lights – when the room needs reheating
is invisible – when the room is warmed up
Cooling mode: ashes – when the room needs to be cooled
is invisible - when the room is chilled