AG Neovo LA-22 User manual

LA-22, LA-24 & LA-27 LED-Backlit Display
User Manual
displays.agneovo.com

TABLE OF CONTENTS
2
Contents
SAFETY INFORMATION
WEEE...........................................................................................................................................................3
PRECAUTIONS
Notice ...........................................................................................................................................................4
Cautions When Setting Up ........................................................................................................................... 4
Cautions When Using...................................................................................................................................5
Cleaning and Maintenance........................................................................................................................... 6
Notice for the LCD Display ........................................................................................................................... 6
CHAPTER 1: PRODUCT DESCRIPTION
1.1 Package Contents ..................................................................................................................................7
1.2 Installation ..............................................................................................................................................8
1.2.1 Installing the Stand...................................................................................................................... 8
1.2.2 Adjusting the Tilt ..........................................................................................................................9
1.2.3 Wall Mounting..............................................................................................................................9
1.3 Overview .............................................................................................................................................. 11
1.3.1 Front View ................................................................................................................................. 11
1.3.2 Control Buttons..........................................................................................................................12
1.3.3 Rear View..................................................................................................................................14
CHAPTER 2: MAKING CONNECTIONS
2.1 Connecting the AC Power .................................................................................................................... 15
2.2 Connecting Input Source Signals ......................................................................................................... 16
2.3 Connecting Audio Devices ................................................................................................................... 17
CHAPTER 3: ON SCREEN DISPLAY MENU
3.1 Using the OSD Menu ........................................................................................................................... 18
3.2 OSD Menu Tree ................................................................................................................................... 19
CHAPTER 4: ADJUSTING THE LCD DISPLAY
4.1 Colour Setting....................................................................................................................................... 21
4.2 Picture Setting ......................................................................................................................................22
4.3 OSD Setting ......................................................................................................................................... 23
4.4 Other Setting ........................................................................................................................................24
4.5 Reset Setting........................................................................................................................................25
CHAPTER 5: APPENDIX
5.1 Warning Messages...............................................................................................................................26
5.2 Troubleshooting....................................................................................................................................27
5.3 Transporting the LCD Display .............................................................................................................. 28
CHAPTER 6: SPECIFICATIONS
6.1 Display Specications .......................................................................................................................... 30
6.2 Display Dimensions..............................................................................................................................31

3
SAFETY INFORMATION
Safety Information
WEEE
Information for users applicable in European Union countries
The symbol on the product or its packaging signies that this product has to be disposed
separately from ordinary household wastes at its end of life. Please kindly be aware that
this is your responsibility to dispose electronic equipment at recycling centers so as to help
conserve natural resources. Each country in the European Union should have its collection
centers for electrical and electronic equipment recycling. For information about your recycling
drop off area, please contact your local related electrical and electronic equipment waste
management authority or the retailer where you bought the product.

PRECAUTIONS
4
PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Symbols used in this manual
This icon indicates the existence of a potential hazard that could result in personal injury
or damage to the product.
This icon indicates important operating and servicing information.
Notice
• Read this User Manual carefully before using the LCD display and keep it for future reference.
• The product specications and other information provided in this User Manual are for reference only. All
information is subject to change without notice. Updated content can be downloaded from our web site at
http://displays.agneovo.com.
• To register online, go to http://displays.agneovo.com.
• To protect your rights as a consumer, do not remove any stickers from the LCD display. Doing so may
affect the determination of the warranty period.
Cautions When Setting Up
Do not place the LCD display near heat sources, such as a heater, exhaust vent, or in direct
sunlight.
Do not cover or block the ventilation holes in the housing.
Place the LCD display on a stable area. Do not place the LCD display where it may subject to
vibration or shock.
Place the LCD display in a well-ventilated area.
Do not place the LCD display outdoors.
Do not place the LCD display in a dusty or humid environment.
Do not spill liquid or insert sharp objects into the LCD display through the ventilation holes.
Doing so may cause accidental re, electric shock or damage the LCD display.
Precautions

5
PRECAUTIONS
Cautions When Using
Use only the power cord supplied with the LCD display.
The power outlet should be installed near the LCD display and be easily accessible.
If an extension cord is used with the LCD display, ensure that the total current consumption
plugged into the power outlet does not exceed the ampere rating.
Do not allow anything to rest on the power cord. Do not place the LCD display where the power
cord may be stepped on.
If the LCD display will not be used for an indenite period of time, unplug the power cord from
the power outlet.
To disconnect the power cord, grasp and pull by the plug head. Do not tug on the cord; doing
so may cause re or electric shock.
Do not unplug or touch the power cord with wet hands.
WARNING:
Unplug the power cord from the power outlet and refer to qualied service personnel under
the following conditions:
• When the power cord is damaged.
• If the LCD display has been dropped or the housing has been damaged.
• If the LCD display emits smoke or a distinct odor.
Ceiling mount or mount on any other horizontal surface overhead are not advisable.
WARNING:
Installation in contravention of the instructions may result in undesirable consequences,
particularly hurting people and damaging property. Users who have already mounted the
display on the ceiling or any other horizontal surface overhead are strongly advised to
contact AG Neovo for consultations and solutions to help ensure a most pleasurable and
fullling display experience.

6
PRECAUTIONS
Cleaning and Maintenance
Do not attempt to service the LCD display yourself, refer to qualied service personnel.
Opening or removing the covers may expose you to dangerous voltage or other risks.
Notice for the LCD Display
In order to maintain the stable luminous performance, it is recommended to use low brightness setting.
Due to the lifespan of the lamp, it is normal that the brightness quality of the LCD display may decrease
with time.
When static images are displayed for long periods of time, the image may cause an imprint on the LCD
display. This is called image retention or burn-in.
To prevent image retention, do any of the following:
• Set the LCD display to turn off after a few minutes of being idle.
• Use a screen saver that has moving graphics or a blank white image.
• Switch desktop backgrounds regularly.
• Adjust the LCD display to low brightness settings.
• Turn off the LCD display when the system is not in use.
Things to do when the LCD display shows image retention:
• Turn off the LCD display for extended periods of time. It can be several hours or several days.
• Use a screen saver and run it for extended periods of time.
• Use a black and white image and run it for extended periods of time.
There are millions of micro transistors inside the LCD display. It is normal for a few transistors to be
damaged and to produce spots. This is acceptable and is not considered a failure.

7
CHAPTER 1: PRODUCT DESCRIPTION
1.1 Package Contents
When unpacking, check if the following items are included in the package. If any of them is missing or
damaged, contact your dealer.
Chapter 1: Product Description
LCD Display
Quick Start Guide
AUTOMENU
Stand
(for LA-24/LA-27)
Base
AUTOMENU
Power Cord
AUTOMENU
Warranty CardAudio Cable
LA-22 LA-24 LA-27
LA-22, LA-24 & LA-27
displays.agneovo.com
LA-22/LA-24/LA-27_Quick Guide_V010
Quick Start Guide
LA-22, LA-24 & LA-27 LED-Backlit Display
LA-22 LA-24/LA-27
Note:
• Use only the supplied power cord.
• The above pictures are for reference only. Actual items may vary upon shipment.
VGA Cable

8
PRODUCT DESCRIPTION
1.2 Installation
1.2.1 Installing the Stand
1. Place the LCD display with the screen side down on a cushioned surface.
2. Attach the stand to the LCD display.
a. Press rmly on the base to secure the latches on the base into the slots on the stand.
b. Attach the stand to the base mount. (LA-24, LA-27 model)
LA-22
LA-24
LA-27

9
PRODUCT DESCRIPTION
1.2.2 Adjusting the Tilt
For comfort viewing, tilt the LCD display up to an angle of 15°/20°. Hold the stand with one hand and use the
other to adjust the LCD display to the desired angle.
-5°~ +15° -5°~ +20°
LA-22 LA-24 / LA-27
1.2.3 Wall Mounting
To wall mount the LCD display, do the following steps:
1. Remove the base stand.
Please refer to page 28.
2. Remove the base mount.
a. Place the LCD display with the screen side down on a cushioned surface.
b1. Remove the screws securing the base mount to the LCD display. (LA-22 model)
b2. Push the release button and detach the stand from the base mount. (LA-24, LA-27 model)
c. Pull and detach the base mount away from its compartment. (LA-22 model)
LA-22

10
PRODUCT DESCRIPTION
LA-24 / LA-27
3. Wall mount the LCD display.
Screw the mounting bracket to the VESA holes at the rear of the LCD display.
100
mm
100
mm
100 mm
100
mm
LA-22 LA-24 / LA-27
Note: Take measures to prevent the LCD display from falling down and lessen possible injury and damage
to the display in case of earthquakes or other disasters.
• Use only the 100 x 100 mm wall mount kit recommended by AG Neovo. All
AG Neovo wall mount kits comply with VESA standard.
• Secure the LCD display on a solid wall strong enough to bear its weight.
• It is suggested to wall mount the LCD display without tilting it facing
downward.

11
PRODUCT DESCRIPTION
1.3 Overview
1.3.1 Front View
AUTOMENU
AUTOMENU
AUTOMENU
1
2
1
2
1
2
LA-22 LA-24
LA-27
1Display screen
2Control buttons
Press the button to perform its function. For more information about each button, refer to pages
12-13.

12
PRODUCT DESCRIPTION
1.3.2 Control Buttons
AUTOMENU
AUTOMENU
LED Indicator
AUTO
MENU
AUTO
MENU
LED Indicator
AUTOMENU
AUTOMENU
LED Indicator
LA-22 LA-24 LA-27
Button Description
Menu Button
(MENU)
On Screen Display (OSD)
• Press to call out the OSD menu.
During OSD menu
• Use to conrm the selection or enter a submenu.
Left / Right Button
(t/u)
Volume Bar
• Press the ubutton to call out the volume bar.
Audio Volume
50
Then press the t/ubutton to adjust the volume level.
Note: During volume or menu setting adjustment, press and hold the t/ ubutton
to change the values continuously.
Input Select Bar
• Press the tbutton to call out the Input Select bar.
VGA DPHDMI
Then press the t/ubutton to switch the input source and press the MENU
button to conrm.
During OSD menu
• Use to scroll through the menu options.
• Use to select an option and adjust the settings.

13
PRODUCT DESCRIPTION
Button Description
Auto Button
(AUTO)
Auto Adjustment (available in VGA input only)
Press to perform auto adjustment. This function automatically tunes the LCD
display to its optimal setting, including horizontal position, vertical position, clock,
and phase.
When auto adjustment is initiated, the below message is displayed on the screen.
Auto Adjust
When the message disappears, this indicates the auto adjustment is completed.
Note:
• During auto adjustment, the screen will slightly shake for a few seconds.
• It is recommended to use the auto adjustment function when using the
LCD display for the rst time or after a resolution or frequency change.
During OSD menu
• Use to close the OSD menu or exit a submenu.
During volume adjustment
• Use to close the volume bar.
Power Button ( ) Power ON/OFF
• Press once to turn the display ON.
• Press again to turn the display OFF.
LED Indicator LED lights green during normal operation and blinks green when on standby
mode.

14
PRODUCT DESCRIPTION
1.3.3 Rear View
AUDIO INHDMI VGA
DP
1 3 4 5
7 7 7
LA-22 LA-24 LA-27
26
1AC Power Input
Use to connect the power cord.
2DP (DisplayPort) connector
Use to connect an DisplayPort cable for digital input signal.
3HDMI connector
Use to connect an HDMI cable for digital input signal.
4VGA connector
Use to connect a VGA cable for analogue input signal.
5Audio In port (3.5mm Audio Jack)
Use to connect an audio cable for audio input.
6Head Phone (3.5mm Audio Jack)
Use to connect a head phone.
7Kensington lock socket
Use to physically lock the system to prevent theft.
The locking device is sold separately. To purchase, contact your retailer.

15
CHAPTER 2: MAKING CONNECTIONS
CAUTION:
Make sure that the LCD display is not connected to the power outlet before making any
connections. Connecting cables while the power is ON may cause possible electric shock or
personal injury.
2.1 Connecting the AC Power
1. Connect the power cord to the AC power input at the rear of the LCD display.
2. Connect the plug to a power outlet or power supply.
AC IN
CAUTION:
When unplugging the power cord, hold the power cord by the plug head. Never pull by the
cord.
Chapter 2: Making Connections

16
MAKING CONNECTIONS
2.2 Connecting Input Source Signals
Input source signals can be connected with either of the following cables:
HDMI VGADP
HDMI VGA
DP
• DisplayPort
Connect one end of a DisplayPort cable to the DisplayPort
connector of the LCD display and the other end to the
DisplayPort connector of the computer.
• HDMI
Connect one end of an HDMI cable to the HDMI connector
of the LCD display and the other end to the HDMI
connector of the computer.
• VGA
Connect one end of a D-sub 15-pin cable to the VGA
connector of the LCD display and the other end to the
D-sub connector of the computer.

17
MAKING CONNECTIONS
2.3 Connecting Audio Devices
• Audio Input
Connect one end of an audio cable to the audio port of the LCD display and the other end to the audio port
of the computer.
AUDIO IN
Audio Out
• Audio Output
Connect a headphone to the headphone jack of the LCD display.

CHAPTER 3: ON SCREEN DISPLAY MENU
18
3.1 Using the OSD Menu
1. Press the MENU button to call out the OSD window.
Submenu
1920x1080 60Hz
Contrast 78
Brightness
Color Temp.
Auto Adjust
Color Adjust
90
Menu
option
During HDMI/DisplayPort input,
Picture Setting is disabled and
grey out.
2. Press the tor ubutton to select a menu and press the MENU button to enter the selected
menu.
1920x1080 60Hz
H. Position 50
V. Position
Clock
Phase
50
50
78
1920x1080 60Hz
H. Position
V. Position
Clock
Phase
50
50
50
78
A selected menu is highlighted in grey and the text of the selected menu option turns yellow.
3. Press the tor ubutton to select an option and press the MENU button to enter its
submenu.
1920x1080 60Hz
H. Position
V. Position
Clock
Phase
50
50
50
78
1920x1080 60Hz
H. Position
V. Position
Clock
Phase
50
50
50
78
The text of the selected menu option or submenu turns yellow.
4. Press the tor ubutton to adjust the settings.
5. To exit the submenu, press the AUTO button.
6. To close the OSD window, press the AUTO button twice.
Note: When settings are modied, all changes are saved when the user does the following:
• Proceeds to another menu
• Exits the OSD menu
• Waits for the OSD menu to disappear
Chapter 3: On Screen Display Menu

19
ON SCREEN DISPLAY MENU
3.2 OSD Menu Tree
Main Menu Submenu Reference
Colour Contrast Refer to page 21.
Brightness
Color Temp. 9300
6500
5500
USER
Auto Adjust
Color Adjust
Picture H. Position Refer to page 22.
V. Position
Clock
Phase
OSD Language English Refer to page 23.
Français
Deutsch
Italiano
Русский
Spanish
Portuguese
日本語
한국어
繁體中文
简体中文
OSD H. Pos.
OSD V. Pos.
OSD Timer
Transparency

20
ON SCREEN DISPLAY MENU
Main Menu Submenu Reference
Other Mode PC Refer to page 24.
Vivid
Movie
Audio Volume
Signal Source VGA
HDMI
DP
Aspect Ratio 16:9
AUTO
4:3
Active Contrast On
Off
Over Drive On
Off
Anti Blue Light
ANTI-BURN-IN
Reset Reset Refer to page 25.
Note: Availability of some menu items depend on the input source signal. If the menu is not available, it is
disabled and greyed out.