Agrisem DS610 User manual

USER MANUAL
AGRISEM INTERNATIONAL - 535 Rue Pierre Levasseur CS 60263 –44158 ANCENIS CEDEX
Tél : [phone] –Fax : [phone]
NOTT-E-601-C 21.11.14
MECHANICAL SEEDERS
-
DS610
DS1100
DS1400
Return the warranty certificate within
15 days together with a copy of the
invoice (without these elements the
warranty procedure cannot be
implemented).

2

3
PREAMBULE
This manual is provided with your machine to enable you to make best use of your equipment, in
particular under safe working conditions.
All owners are reminded that the manual is an essential accessory which must remain with the
machine at all times, and that in the event of resale, article 1615 of the Civil Code requires that as
such it must be handed over to the new owner.
You are also reminded that as the manual is essential to the machine, all owners must undertake to
leave it physically available with the machine for all users to consult.

4

5
AGRISEM INTERNATIONAL - 535 Rue Pierre Levasseur CS 60263 –44158 ANCENIS CEDEX –Tél : [phone] –
Fax : [phone]

6

7
DECLARATION OF COMPLIANCE
WITH THE “MACHINES” DIRECTIVE
The manufacturer referred to above certifies that the new equipment described below:
MECHANICAL SEEDERS
Complies with the measures of the modified "Machines" directive (directive 98/37/CE) and with the
applicable national legislation.
Ligné,
30th March 2010
Michal GUZOWSKI
Chief Executive Officer

8
CONTENTS
1. INTRODUCTION................................................................................................................................... 10
2. WARRANTY CONDITIONS................................................................................................................ 11
2.1. EXCLUSIVE RESPONSIBILITY CLAUSE........................................................................................ 14
2.2. COMPLIANT USEOF THE MACHINE ............................................................................................. 15
2.3. SAFETY INSTRUCTIONS.................................................................................................................. 16
2.3.1. Safety instructions......................................................................................................................... 16
2.3.1.1. Introduction............................................................................................................................................... 16
2.3.1.2. Instructions to respect before using the machine....................................................................................... 17
2.3.1.3. Instructions to be respected for hitching and unhitching ........................................................................... 18
2.3.1.4. Instructions to respect before using the machine....................................................................................... 19
2.3.1.5. Instructions to respect before carrying out any operations on the machine ............................................... 21
2.3.1.6. Instructions regarding installation ............................................................................................................. 22
2.3.1.7. Instructions regarding the hydraulic system .............................................................................................. 23
2.3.1.8. Instructions relating to the braking system. ............................................................................................... 23
2.3.1.9. Instructions specific to AGRISEM seeders ............................................................................................... 24
2.3.1.10. Instructions relating to safety systems with spring security....................................................................... 25
2.3.1.11. Instructions relating to transmission shafts with universal joints............................................................... 25
2.3.1.12. Instructions relating to loading and transport ............................................................................................ 25
2.3.2. Safety symbols on the machine...................................................................................................... 26
3. TECHNICAL INSTRUCTIONS........................................................................................................... 27
3.1. ADJUSTMENTS /USING THE MECHANICAL DISC-O-SEM ........................................................ 27
3.1.1. Hitching / unhitching..................................................................................................................... 27
3.1.1.1. Tractor-mounted machine.......................................................................................................................... 28
3.1.1.2. Trailed machine......................................................................................................................................... 28
3.1.2. Adjustments / Use.......................................................................................................................... 29
3.1.2.1. Adjusting working depth using the roller .................................................................................................. 29
3.1.2.2. Disc-O-Sem settings for firm ground ........................................................................................................ 30
3.1.2.3. Disc-O-Sem settings for soft ground ......................................................................................................... 30
3.1.2.4. The batchers .............................................................................................................................................. 31
3.1.2.5. Adjusting the position of the tongues on the moveable base ..................................................................... 32
3.1.2.6. Batcher calibration..................................................................................................................................... 32
3.1.2.7. Flow rate test procedure ............................................................................................................................ 33
3.1.2.8. Flow rate test ............................................................................................................................................. 34
3.1.3. Metering table for the DS610 and DS1100................................................................................... 34
3.1.3.1. Seed metering table (kg/ha)....................................................................................................................... 35
3.1.4. Seed metering table for the DS1400.............................................................................................. 36
3.1.4.1. Seed metering table (kg/ha)....................................................................................................................... 36
3.1.5. Check during sowing..................................................................................................................... 37
3.1.6. Operating advice........................................................................................................................... 37
3.2. SERVICING -MAINTENANCE ......................................................................................................... 38
3.2.1. Servicing frequency....................................................................................................................... 38
3.2.2. Storage.......................................................................................................................................... 39
3.2.3. Lubrication................................................................................................................................... 39
3.2.4. Lubrication.................................................................................................................................... 40
3.2.5. Maintenance.................................................................................................................................. 41

9
3.2.6. Disks...............................................................................................................................................43
3.2.7. Lighting system ......................................................................................................................... ...44
4. WARRANTLY CLARM FORM …………………………………………………………………………..45

10
1. INTRODUCTION
Warranty certificate MUST be returned within 15 days of delivery of the
machine to the final user.
You have just acquired your AGRISEM machine. It has been designed to give complete satisfaction.
The equipment has been carefully designed using new solutions to reduce usage costs.
However, to get the best and most profitable use from your AGRISEM machine, please read this
manual carefully before starting it and follow the instructions strictly. In particular, follow the
instructions for adjusting and servicing the machine and the safety measures very carefully.
For any information or advice: please contact our dealer.
This user manual must be read and complied with by any persons who will be using it or maintaining
it, in particular:
-Usage (including preparation, repairs required during periods of work and maintenance).
-Maintenance (servicing and inspection).
-Transport.
AGRISEM INTERNATIONAL cannot be held liable for personal injury or damage to equipment and
malfunctions resulting from failure to comply with the instructions given by the manufacturer in this
manual.
This user manual is an integral part of the machine and must always be kept with the machine,
especially in case of resale.
AGRISEM INTERNATIONAL is constantly seeking to improve its products and reserves the right to
modify or improve its production without being under any obligation to apply these modifications or
improvements to products already on the market.
The instructions in this manual are not exhaustive and cannot cover all eventualities. The user must
comply with the applicable legislation, in particular with regard to safety, ensure that the rules for
safety and caution dictated by the situation are applied, use common sense and adapt the use of the
machine to the circumstances.
It is the Purchaser’s responsibility to check that the AGRISEM machine complies with the legislation
and regulations applicable to its final destination.

11
2. WARRANTY CONDITIONS
The warranty conditions applicable to machines fitted exclusively with genuine spare parts from
AGRISEM INTERNATIONAL - 535 Rue Pierre Levasseur CS 60263 –44158 ANCENIS CEDEX,
France, are as follows:
DURATION
If a defect is observed on a structural part within a period of 6 months as from the date of delivery
of the machine, and if this defect is due to faulty raw materials, or its manufacture at the factory.
The parts presumed to be faulty must be returned to the address of the Company for expert
inspection.
The following shall be considered proof of the date of delivery of the equipment:
-the date of the delivery slip and the purchaser’s invoice.
-the return of the warranty certificate within 15 days (with dealer's and purchaser’s stamp and
signature) following delivery of the equipment.
MACHINES AND PARTS CONCERNED
For the purposes of this warranty, the term “Machine” is exclusively used to designate machines
and parts manufactured by AGRISEM INTERNATIONAL. (It does not include external
components, in particular tyres, hydraulic hoses, etc. even though these parts are also supplied by
the Company)
The warranty is void if any modifications have been made to the machine without
the formal agreement of AGRISEM INTERNATIONAL or if parts other than those
manufactured by the Company have been fitted (e.g. counterfeit wear parts).
EXTENT OF THE WARRANTY
The warranty is limited to the reimbursement or repair of parts recognised as faulty with regard to
the raw material or machining, in our factories by our Technical Departments.
Any costs linked to dismantling and replacement of the faulty part are not covered by the warranty.
The cost of transporting machines or machine parts to the place of repair and their return to their
owner is not covered either.
Wear parts are not covered by the warranty.
PRECONDITIONS
The machine must be maintained and used in compliance with the instructions in this User Manual.
All the safety measures described in the User Manual and in the manuals of any additional equipment
must be complied with.
All the protection and safety elements, and dangerous parts (e.g. shock absorbers, etc.) must be
inspected regularly and replaced if necessary.
The warranty is only valid if the customer has satisfied the general obligations of the contract, in

12
particular the payment conditions.
WARRANTY EXCLUSIONS
The warranty does not of course apply to:
-Faults due to normal wear, incorrect use, lack of maintenance, incorrect monitoring or
negligence.
-If the machine is damaged by an accident or develops a fault due to being used other than for
the applications specified by AGRISEM.
-In case of non-compliant use of the machine. Please consult chapter 3 with regard to this
point: Compliant use of the machine.
-If the instructions and advice issued by the manufacturer included in this manual are not
complied with, in particular with regard to: safety, assembly, commissioning, usage, operation
and maintenance.
-Improper handling on the part of the user.
-Causes due to the presence of foreign bodies.
-In the event of damage due to the machine being combined with other machines or
instruments without prior written agreement from AGRISEM, and/or without complying with the
instructions of the manufacturers of the tractor and other instruments or machines.
-If the machine is used with protection and safety devices that are incorrectly fitted or not
working.
-If the machine has been modified without prior written permission from AGRISEM, or if spare
parts, accessories or equipment have been fitted to the machine which were not
recommended by AGRISEM.
-In case of non-compliant repair.
-If faults are due to the machine being immobilised.
-In the event of damage during transport or handling by a transporter. It is the recipient’s
responsibility to lodge the necessary complaints with the transporter.
-The adverse consequences of the machine being immobilised due to a fault or incident on the
machine are not covered by the warranty.
-Personal injury to the owner or third party and the indirect consequences resulting from this
are not covered by the warranty.
Moreover, AGRISEM INTERNATIONAL shall not be liable for the payment of compensation for
any reason whatsoever in case of loss of the crop or any damage whatsoever due to a fault,
hidden defect or machine breakdown.
The purchaser is always responsible for the choice of product and the suitability of the machine for
the result he hopes to obtain. He is responsible for its correct use in line with professional practice
and the regulations.
Under no circumstances will AGRISEM INTERNATIONAL have any obligation with regard to the
final result.
LIMITATION AND RESPONSIBILITY
-The warranty cannot be attributed or transferred to any other person without the prior written
permission of AGRISEM INTERNATIONAL.
-Under no circumstances do those selling our machines have the right or power to make any
decision whatsoever, either express or tacit, in the name of the Company.
-The technical assistance given by the Company or its representatives for the repair or
operation of equipment does not make it responsible for any costs and in no way alter or lead
to the waiver of the conditions of this warranty.
PROCEDURE FOR IMPLEMENTING THE WARRANTY: TO BE STRICTLY
ADHERED TO BY THE DISTRIBUTOR AND BY THE PURCHASER

13
Application of the warranty is dependant on the strict compliance on the part of the dealer and the user
with the following measures:
A) RETURN BY THE DEALEROF THE WARRANTY CERTIFICAT DULY COMPLETED AND
SIGNED BY THE DEALER AND THE PURCHASER.
B) Claims must be made without fail on an AGRISEM INTERNATIONAL "WARRANTY CLAIM
SLIP" (see appendix) and sent by registered letter with acknowledgement of receipt by the
dealer to the company’s technical department within 10 days as from the date of the incident.
This slip must be completed legibly by the dealer and must include the following information:
-Name and address of the dealer, code No.
-Name and address of the purchaser,
-Type of machine,
-Working width,
-Machine serial number,
-Date of delivery to the purchaser,
-Date of breakdown,
-Precise references of the parts replaced, No. and date of invoice,
-Make and model of the tractor used,
-Detailed description and assumed cause of the incident.
-Surface worked with the seeder
-Utilised agricultural land belonging to the farm,
-Type of soil % clay
-Proof of wear part invoice
-stones yes no
-parts replaced yes no (send photocopy of the invoice)
C) Supposedly faulty parts are to be returned by the dealer to the Company address for
expert inspection, together with the copy of the warranty claim form provided for this purpose.
The dealer must order the faulty part from the spare parts department. Transport costs
incurred by the return of the said parts are at the sender’s expense.
D) The final decision regarding payment under the terms of the warranty shall be made by the
company’s technical or general management. Whatever the reason for the warranty claim may
be, this decision is final and irrevocable and the purchaser undertakes to accept this decision
both with regard to the fault and the replacement of the part or parts.
Under no circumstances are the company salesmen authorised to make such a decision, which
would be void.
NOTE: In case of refusal, the part remains at the customer’s disposal for eight days. After this time it will be scrapped with
no appeal possible.
Under no circumstances do those selling our machines have the right or power to make any
decision whatsoever, either express or tacit, in the name of the Company.
5-YEAR WARRANTY CONTRACT
If the customer subscribes to the 5-year warranty, please see this contract for the measures and
conditions for implementing this warranty.

14
2.1. EXCLUSIVE RESPONSIBILITY CLAUSE
AGRISEM INTERNATIONAL declines any responsibility for damage (and any indirect consequences
linked to it) resulting from one or more of the following causes:
-Non-compliant use of the machine.
-Failure to comply with the instructions and advice issued by the manufacturer included
in this manual, in particular with regard to: safety, assembly, commissioning, usage,
operation and maintenance.
-Unsuitable assembly, commissioning usage and maintenance of the machine.
-Using the machine with faulty protection and safety measures or safety and protection
measures that are incorrectly installed and not working.
-Combining the machine with other instruments or machines without the written
agreement of AGRISEM and/or without complying with the instructions given by the
manufacturers of the tractor and other instruments or machines.
-Modification made to the machine without the written permission of AGRISEM.
-Fitting of spare parts, accessories or equipment on the machine which are not
genuine or which have not been recommended by AGRISEM.
-Failure to monitor the wear parts on the machine.
-Using the machine other than for the applications specified by the manufacturer.
-Non-compliant repair and maintenance.
-Catastrophes resulting from foreign bodies, unforeseeable circumstances and force
majeur.
Moreover, AGRISEM INTERNATIONAL shall not be responsible for injury to the owner or third party
nor the indirect consequences, resulting or not from a fault. You are reminded that a safety distance of
50 meters must be maintained around the machine
Any claim for compensation for damage that did not occur directly on the machine is excluded.
AGRISEM INTERNATIONAL shall not be liable for damage caused by driving or usage errors.
AGRISEM INTERNATIONAL cannot be held liable for compensation of the consequences of the
immobilisation of the instrument due to a fault or an incident on the machine.

15
2.2. COMPLIANT USE OF THE MACHINE
AGRISEM INTERNATIONAL products must only be used for the work for which they were designed:
Work on arable land under normal conditions
In the event of damage linked to the use of the machine other than for the applications specified by the
manufacturer, the manufacturer shall be entirely released from liability.
Only use the machine in good technical condition, in accordance with the purpose for which it was
designed and in full knowledge of the risks.
Compliant use of the machine also involves:
-Compliance with the instructions for use, servicing and maintenance issued by the
manufacturer
-Compliance with all the instructions in this manual, in particular the safety instructions.
-Exclusive use of genuine spare parts, accessories and equipment or those recommended by
the manufacturer.
AGRISEM machines must not be combined with other machines or instruments without prior written
permission from AGRISEM INTERNATIONAL.
For any combination, the user must also comply with the instructions given by the tractor
manufacturer.
AGRISEM machines must only be used, serviced and repaired by competent persons who are familiar
with the features and mode of use of the machine. These persons must be informed of the dangers to
which they may be exposed.
The user is required to strictly comply with the current legislation with regard to:
Accident prevention
Safety at work (labour code)
Driving on the public highway (Highway code)
He is required to observe the warnings affixed to the machine. Any modifications made to the machine
by the user or any other person without the prior written permission of the manufacturer releases the
latter from any responsibility for damage which may result.
The damage resulting from non-compliant use of the machine:
Is the entire responsibility of the user,
is under no circumstances assumed by AGRISEM INTERNATIONAL

16
2.3. SAFETY INSTRUCTIONS
2.3.1. Safety instructions
2.3.1.1. Introduction
Most accidents which occur during work, maintenance or travelling from one place to another are due
to failure to apply the most basic safety rules. It is therefore essential that anyone likely to be working
with this machine should strictly adhere to the basic rules listed below and to the safety instructions
displayed on the stickers affixed to the machine.
This machine has been designed for a specific task. It must always be in good working order and must
only be repaired using genuine AGRISEM INTERNATIONAL spare parts.
This machine must only be used, maintained and repaired by competent persons who are familiar with
its features, its modes of use and who are aware of the safety rules for accident prevention and the
dangers to which they may be exposed.
This machine must only be used: in accordance with its final purpose and in a condition that does not
present any risk to safety. Any malfunctions likely to be harmful to safety must be corrected
immediately.
The user is required to strictly adhere to the safety instructions in this manual and the stickers affixed
to the machine.
The user is also required to strictly comply with the current legislation with regard to: accident
prevention, safety at work (labour code), occupational medicine and highway legislation.
Before using the machine for the first time, read all the safety instructions in this user manual carefully
and familiarise yourself with the controls.
The machine must never be entrusted to a person who is not trained to use it.
Responsibility and warranty:
In addition to the other cases mentioned in this manual, the manufacturer declines any responsibility
for any injury or damage to equipment resulting from one or more of the following causes:
-Failure to comply with the instructions and advice issued by the manufacturer included
in this manual, in particular with regard to: safety, assembly, commissioning, usage,
operation and maintenance.
-Non-compliant use of the machine.
-Unsuitable assembly, commissioning, usage and maintenance of the machine.
-Using the machine with faulty protection and safety devices or safety and protection
devices that are incorrectly installed or not working.
-Combination of the machine with other instruments or machines without the written
agreement of AGRISEM and/or without complying with the instructions given by the
manufacturers of the tractor and other instruments or machines.
-Modification made to the machine without the written permission of AGRISEM.
-Fitting of spare parts, accessories or equipment on the machine which are not
genuine or which have not been recommended by AGRISEM.
-Failure to monitor the wear parts on the machine.
-Using the machine other than for the applications specified by the manufacturer.
-Non-compliant repair and maintenance.
-Catastrophes resulting from foreign bodies, unforeseeable circumstances and force
majeur.

17
In the same way, in addition to the other cases mentioned in this manual, any claim under the
warranty linked to damage resulting from one or more of the above-mentioned clauses is excluded.
2.3.1.2. Instructions to respect before using the machine
Wear close-fitting clothes. Loose clothing may become caught in moving parts.
Wear individual protective equipment corresponding to the work you are planning to do
(gloves, shoes, goggles, helmet, ear protection, etc.).
Be aware that tillage equipment, even of small width, has very sharp elements (blades, shares,
disks, etc.) which can cause serious injury in case of accident.
Before each time the machine is used, check the area around the machine (presence of
children). Ensure you have sufficient visibility.
Before any work, ensure that the tractor is sufficiently weighted at the front to avoid any risk of the
front lifting. If not, add weights to the front of the tractor.
Check that screws, nuts and bolts are correctly tightened before each time you use the machine.
Tighten if necessary. Also check the condition of the tools and their fastening elements in accordance
with the instructions in this manual.
While folding and unfolding the machine, no one must be within 50 metres of the machine.
Check that the machine is correctly hitched.
Always install the pins and locking systems.
Check that the machine complies with personal safety.
Check before each time you use the machine that the safety and protection devices are in place and
working. Replace any worn or damaged protector immediately.
Move any person or animal likely to be in the area where the machine is manoeuvring or being
used. A 50-metre safety zone must be kept clear around the machine.
Go around the machine looking for any external damage and checking the condition of the protection
devices.
Only persons authorised by the owner of the machine and who have been trained are allowed to work
on and with this machine. The operator is responsible with regard to third parties when he is working
on and with the machine.
The owner of the machine must:
-Provide the operator with the user manual.
-Ensure that the operator has read it and understands it.
-Ensure that the operator knows the basic instructions regarding safety at work and accident
prevention.

18
2.3.1.3. Instructions to be respected for hitching and unhitching
Pay attention to the various possibilities permitted for connecting the tractor’s coupling equipment to
that of the machine.
Only combine equipment that is compatible (machine and tractor)
Check that the tractor has the necessary characteristics to hitch the machine.
WARNING:
Risk of the tractor breaking during operation, of having insufficient stability under load, and
insufficient manoeuvrability and braking power in the case of non-compliant implementation.
Check that the tractor satisfies the necessary requirements before installing or hitching the machine.
The machine must only be mounted on a tractor or hitched to a tractor if it satisfies the necessary
requirements.
Perform a braking test to check that the tractor can provide the regulatory deceleration power even
with the machine mounted or hitched.
The requirements relating to the tractor concern in particular:
-The total authorised weight
-The authorised axle loads
-The authorised vertical load on the tractor coupling point
-The permissible load capacities of the tyres mounted on the tractor
-Sufficient authorised load on the coupling point
You will find this information on the data plate or on the vehicle's registration papers and in the tractor
user manual.
The tractor's front axel must systematically be able to support at least 20% of the empty weight of the
tractor.
Calculation of the real values of the total tractor weight, tractor axle load and the load capacity
of the tyres, and of the minimum ballast required:
The total authorised weight of the tractor indicted on the vehicle’s registration papers must be greater
than the sum of:
- The empty weight of tractor,
- The ballast
- The total weight of the mounted machine or the vertical load of the hitched machine.
This instruction only applies in Germany:
If the axle loads and/or the total authorised weight are not complied with after all the possibilities have
been exhausted, the competent authority according to the law of the land, may deliver a waiver based
on the report of an approved expert in the field of motor vehicle circulation and with the agreement of
the manufacturer, in accordance with article 70 of the German law governing the authorisation of
vehicles to use the public highway, and the obligatory authorisation with regard to the German
highway code.
Combination of machines: do not combine machines which are incompatible or a combination of which
is incompatible with the tractor.

19
AGRISEM declines all responsibility in the case of damage resulting from a combination of
machines which has not received written authorisation from AGRISEM.
Danger of accidents linked to the breakage of components during operation resulting from
unauthorised combinations of hitching equipment.
Hitching and ballasting are operations which involve a risk of injury.
Before hitching or unhitching:
-Place the machine on stable ground.
-Chock the machine and take all the necessary measures to avoid accidental
movement of the tractor.
The machine must only be coupled using the coupling points provided for this purpose and in
compliance with the applicable rules.
When hitching, do not exceed:
-The total authorised weight for the tractor
-The authorised axle loads for the tractor
-The permissible load capacities of the tyres mounted on the tractor.
2.3.1.4. Instructions to respect before using the machine
WARNING
Risk of accident involving crushing, cuts, entanglement, pinching or impacts linked to a safety
fault concerning movement or operation.
Before starting up, check that the machine and the tractor are able to move and operate in complete
safety.
Never climb on to the machine or stand on it when it is moving.
Never work in reverse.
Never allow children to climb on the tractor or the machine, or play near the equipment, even if
the machine is stopped.
When using or manoeuvring the machine ensure no one is within the manoeuvring or working
area.
The elements of the machine controlled by external force have crushing and shearing zones.
Keep away from these hazardous areas.
Be aware of hidden obstacles (stones, roots, pipes, cables, etc.) in case of collision with an obstacle.
It is essential to stop the drive, stop the tractor engine, remove the ignition key and wait
for the machine to stop completely.
No one must be standing between the tractor wheels and the tool when
hitching or unhitching.

20
Before starting work again, check the machine for any damage.
If the obstacle is an electric cable or gas pipe, inform the appropriate authorities.
When using the machine, stones or other foreign bodies are likely to be thrown a considerable
distance.
Move any person or animal likely to be in the danger area around the machine.
Do not stand in the machine's working area nor in the area where the machine rotates and pivots.
Each time the machine is used, carry out a careful visual inspection of the machine to detect any
external damage and ensure the safety and protection devices are operating correctly. Also carry out
regular inspections of the various settings.
Do not approach the machine until all the moving parts are completely immobile.
Enforce a 50-meter safety area around the machine.
With regard to driving :
Adapt your driving to ensure you are in control of the tractor with the machine mounted or hitched
under all circumstances.
In this respect, take into account your personal faculties, the conditions of the land or road, the traffic,
the visibility and the weather, the tractor’s driving characteristics and the conditions of use when the
machine is mounted or hitched.
Ensure that the rules for safety and caution required for situation are applied.
The speed and method of driving must always be adapted to the land, roads and tracks.
On uneven ground or tight corners, reduce speed.
In bends, take into account the overhang and the inertia of the mounted tool.
Avoid sudden changes of direction at all times.
Do not leave the driver's seat until the equipment has completely stopped, the engine is off and the
parking brake is on.
Do not transport any person or animal on the machine and additional tools during work or
transport.
When driving on the public highway:
Comply with the highway code applicable in your country.
Before going out on the public highway, check the regulatory width of the machine and
unbolt or remove elements which exceed this width.
Take into account authorised widths for transport and take into account the transported height
depending on the hitched machine, in line with current legislation.
Before setting off on the road ensure that the hitched machine is fitted with the lighting and signalling
devices required by the highway code and any other measures required by the current regulations.
AGRISEM rear signalling lights and panels can be removed when working. Check that this signalling
equipment has been correctly refitted.
Check that this equipment is clean and is working properly. Replace all missing or damaged
equipment.