Ai Hardware AI-HT-T7 User manual

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
AI-HT-T7 Mobile Computer
User Manual

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
1
Content
Content .........................................................................................1
Chapter 1 Product intro.....................................................................3
1.1 Intro....................................................................................3
1.2 Precaution before using battery...........................................4
1.3 Charger...............................................................................5
1.4 Notes..................................................................................6
Chapter 2 Installation instructions .....................................................7
2.1 Appearance.............................................................................7
2.2 Install Micro SD and SIM cards............................................... 8
2.3 Battery charge........................................................................ 9
2.4 Buttons and function area display..........................................10
Chapter 3 Call function ...................................................................11
3.1 Calling numbers ....................................................................11
3.2 Contacts................................................................................11
3.3 SMS and MMS ......................................................................11
Chapter 4 Barcode reader-writer.....................................................12
Chapter 5 RFID reader ...................................................................14
5.1 NFC.......................................................................................14
Chapter 6 Other functions...............................................................15
6.1 PING tool...............................................................................15
6.2 Bluetooth...............................................................................16
6.3 GPS ......................................................................................17
6.4 Volume setup ........................................................................18
6.5 Sensor...................................................................................19

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
2
6.6 Keyboard...............................................................................20
6.7 Network.................................................................................21
6.8 Keyboard emulator ................................................................22
Chapter 7 Device characteristic ......................................................23

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
3
Chapter 1 Product intro
1.1 Intro
AI-HT-T7 is an industrial-grade smart handheld terminal .It is based on
Android 7.1 / Android 9.0, whichruns fast and has a long battery life.
To meet the needs of multi-industry applications like logistics express,
warehouse inventory,manufacturing, retail, etc., It can help customers
to quickly access information and improve the efficiency of outbound
storage inventory

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
4
1.2 Precaution before using battery
Do not leave battery unused for long time, no matter it is in
device or inventory. If battery has been used for 6 months
already, it should be check for charging function or it should be
disposed correctly.
The lifespan of Li-ion battery is around 2 to 3 years, it can be
circularly charged for 300 to 500 times. (One full battery charge
period means completely charged and completely discharged.)
When Li-ion battery is not in used, it will continue discharge
slowly. Therefore, battery charging status should be checked
frequently and take reference of the related battery charging
information on the manuals.
Observe and record the information of a new unused and non-
fully charged battery. On the basis of operating time of new
battery and compare with a battery that has been used for long
time. According to product configuration and application
program, the operating time of battery would be different.
Check battery charging status at regular intervals.
When battery operating time drops below about 80%, charging
time will be increased remarkably.
If a battery is stored or otherwise unused for an extended
period, be sure to follow the storage instructions in this
document. If you do not follow the instructions, and the battery
has no charge remaining when you check it, consider it to be
damaged. Do not attempt to recharge it or to use it. Replace it
with a new battery.
Store the battery at temperatures between 5 °C and 20 °C
(41 °F and 68 °F).

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
5
1.3 Charger
The charger output voltage/current is 9V DC/2A. The plug considered
as disconnect device of adapter.

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
6
1.4 Notes
Note:
Using the incorrect type battery has danger of explosion.
Please dispose the used battery according to instructions.
Note:
Due to the used enclosure material, the product shall only be
connected to a USB Interface of version 2.0 or higher. The
connection to so called power USB is prohibited.
Note:
The adapter shall be installed near the equipment and shall be easily
accessible.
Note:
The suitable temperature for the product and accessories is 0-10℃to
50℃.
Note:
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
7
Chapter 2 Installation instructions
2.1 Appearance
T7back and front appearances are showing as follows:

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
8
Buttons instruction
Button
Description
Side
button
1. Power
Locate on right side, press to ON/OFF device.
2. PTT key
Locate on right side, its function can be defined by software.
3.SCAN Scanning button located onboth sides. There are two scanning
buttons.
4. Volume +/- Volume up and down
2.2 Install Micro SD and SIM cards
The cards sockets are showing as follows:

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
2.3 Battery charge
By using USB Type-C contact, the original adaptor should be used for
charging the device. Make sure not to use other adaptors to charge
the device.
9

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
10
2.4 Buttons and function area display
T7has 6 side buttons, 2D scanning module locates on the top. HD
camera and flashlight locate at rear. NFC identification surrounds the
camera.

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
11
Chapter 3 Call function
3.1 Calling numbers
1. Click icon .
2. Click number key to input phone numbers.
3. Click icon to call.
4. Click icon to end call.
3.2 Contacts
1. Click contacts to open contacts list.
2. Click icon to add new contacts.
3. Click icon to import/export contacts.
3.3 SMS and MMS
1. Click to open message window.
2. Click to input message receiver and contents.
3. Click to send out messages.
4. Click to add attachment pictures and videos.

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
12
Chapter 4 Barcode reader-writer
1. In App Center, to open 2D barcode scan test.
2. Press “SCAN”button or click scan key to start scanning, the
parameter “Auto interval”can be adjusted.
Caution: Please scan codes in correct way otherwise the
scanning will be failed.
2D code:

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
13
Max. radiant power: 0.6mW
Wave length: 655nM
IEC 60825-1 (Ed.2.0).
21CFR 1040.10 and 1040.11 standard.

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
14
Chapter 5 RFID reader
5.1 NFC
Click App Center, open “NFC”to read and write tag information.

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
15
Chapter 6 Other functions
6.1 PING tool
1. Open “PING”in App Center.
2. Setup PING parameter and select external/internal address.

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
16
6.2 Bluetooth
1. Open “BT Printer”in App Center.
2. In the list of detected devices, click the device that you want to
pair.
3. Select printer and click “Print”to start printing contents.

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
17
6.3 GPS
1. Click “GPS”in App Center to open GPS test.
2. Setup GPS parameters to access GPS information.

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
6.4 Volume setup
1. Click “Volume”in App Center.
2. Setup volume by requirements.
18

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
19
6.5 Sensor
1. Click “Sensor”in App Center.
2. Setup the sensor by requirements.