AIBAO YB702A User manual

Group I+II+III : 9-36kg
USER’S MANUAL

Contents Important
01
Thank you for your purchasing our baby car seat to protect your babies. This child
restraint has been approved in accordance with the regulaon ECR-R44/04, and
manufactured under strict quality control. Please follow all regulaon labeled on
this child restraint and in the wrien instrucons can result in death or serious
injury in a crash.
Contents ...............................................................................................1
Important .............................................................................................2
Know your car seat ............................................................................3-4
1. Suitability ..........................................................................................5
2. Use in the vehicle ..............................................................................6
3. Securing your baby ............................................................................7
3.1 Securing your baby using the baby insert ........................................7
3.2 How to adjust the belts, headrest and seat posions .....................8
3.3 Securing your baby using the harness ..............................................9
3.4 Tightening the harness .....................................................................9
4.Installaon in the vehicle ..................................................................10
4.1 Installaon of Group I for the children weight between 9-18kg .....10
4.2 Installaon of Group II/III and it is for the children whose weight
between 15-36kg............................................................................11
5.Care instrucons ..............................................................................12
5.1 Removing the 5-point harness system and cover ..........................12
5.2 Refing the 5-point harness system and cover .............................12
5.3 Cleaning .........................................................................................13
5.4 Checklist .........................................................................................13
5.5 Warranty ........................................................................................14
Read carefully before installing your car seat
Please read carefully before installaon, serious injure will be occur if install
incorrectly. Manufacturer won’t take responsibility for any risks in this case.
Don’t make any changes, addions, or changes the way of the restraint
harness to the child car seat, otherwise could seriously affect the security
and funconality.
Always keep the restraint secured in the vehicle even when it is unoccupied.
Child can’t be placed in child car seat alone or should not be unaended.
Never place the child car seat on the vehicle seat with air bag.
Never place the child car seat on the vehicle seat with two-point car safety
belt.
Please ensure all people in car use safety belt, goods in car must be fixed,
otherwise, people and goods may injury child when in the emergency brake
situaon.
Child car seat can’t be reused aer damaged in an accident.
Keep the child car seat out of sun directly, otherwise high-temperature can
hurt child.
Buckle can’t be in semi-locked status. Always confirm the restraint is locked
before using. In case of emergency child can be taken out quickly.
Keep the child car seat away from any erosive arcles.
Never use the child car seat without cover. Never use any cover which not
recommended by manufacture to replace old cover, because the cover
constutes an integral part of restraint performance.
Car seat surface will be signs of wear aer using child car seat on that made
from sensibility material, for example, velour, leather and so on. Please use
think blanket or towel to prevent from this maer.
Child car seat can be only used in car to protect your child, it can’t be used
at home as seat or toy.
Manufacturer guarantees the product’s quality except second-hand products.
02

Know your car seat Know your car seat
0304
Headrest
Shoulder Pads
Harness Strap
Buckle Pads
Harness Adjustment Strap
Adjustment Device
Harness Buckle
Baby Insert Headrest Belt
ShoulderStrap
MetalYoke
ShoulderStrap
Slot
Headrest Red
Buon
Backrest

Use in the vehicle
Suitability
05
WARNING
2. Use in the vehicle
DO NOT use with 2-point belt.
Please install with the 3-point belt.
Please observe the regulaons applicable to your parcular country.
The safety belt must be approved to ECE R 16 or a comparable standard.
Do not use with 2-point belt.
Can be used if the vehicle seat is equipped with a 3-point belt.
1. Cerficaon
Child Safety Seat
Tested and cerfied
according to ECE* R 44/04
Group Body Weight
YB702A I+II+III 9- 36kg
... as a child safety seat installed in a
vehicle
The child safety seat has been designed, tested and cerfied according to the
requirements of the European Standard for Child Safety Equipment (ECE R 44/04).
The seal of approval E (in a circle) and the approval number are located on the
approval label (scker on the child safety seat).
This approval will be invalidated if you make any modificaons to the child safety
seat. Only the manufacturer is permied to make modificaons to the child
safety seat.
You can use your child car seat as follows:
Yes
In the direcon of travel
Against the direcon of travel
With 2-point belt
With 3-point belt
No
Yes
No
Yes
The use of a 2-point belt substanally increases the risk of injury
to your child in the event of an accident.
The safety belt must be approved to ECE R 16 or a comparable
standard (see test label on belt with an "E" or "e" in a circle).
On front passenger seat
Do not use on passenger seats with a front airbag! The front
passenger seat may be used with or without ISOFIX, with the
same notes as currently given for the ISOFIX ( slide the seat back
with the ISOFIX and Top Tether anchoring systems
If there is a front airbag: Slide the passenger seat a long way back
and refer to any instrucons in vehicle owner’s manual.
No
On outer rear seat
On centre rear seat
Yes
Yes
and refer to vehicle instrucons).
Can be used if the vehicle seat is equipped with a 3-point belt.
(Please observe the regulaons applicable to your parcular country).
06

Securing your baby
3.1 Securing your baby using the baby insert
3. Securing your baby
CAUTION
The baby insert is used to provide extra comfort
for very small babies, and it gives your baby the
necessary support while he or she is sll small.
Please use the baby insert aached to this car
seat when your baby 's weight is less than 15kg.
For the protecon of your baby
Always secure your baby in the car seat using the harness.
Never leave your baby unaended in the car seat when placing it on elevated
surfaces (e.g. a table, nappy changing unit, etc.).
Never allow the strap end to become caught in moving parts (e.g. automac
doors, escalators, etc.).
Cauon! The plasc parts of the car seat heat up in the sun, so that your baby
may get burnt. Protect your baby and the car seat against intensive solar
radiaon (e.g. by pung a light cloth over the seat).
Take your baby out of the car seat as oen as possible to relieve its spine. We
recommend frequent breaks during long journeys. Even outside of the car,
please avoid leaving your baby in the car seat for too long.
Baby Insert
Securing your baby
3.2 How to adjust the belts, headrest and seat posions
3.2-1 Adjusng the belts
3.2-2 Eight heights of the headrest
IMPORTANT
The correct belt height of the shoulder belts is
aained when the belt disappears into the shell slightly above the
shoulder of the child.
Make sure that the shoulder belts fit properly over the shoulders of
the child.
Loosen the harness straps by pressing the release
buon and pulling the harness straps as far as you
can.
Note! Do not pull the shoulder pads.
The headrest can be set at five different heights in
group I mode. There are three addional
posions in Group II & III mode once the shoulder
pads and harness straps has been removed.
Press and pull the handle behind headrest.
It is important to make sure the headrest fit properly
to head.
0708

Securing your baby
CAUTION Do not twist or interchange the harness straps.
Slide buckle tongues together
and insert them in the buckle
with an audible sound “ click”.
Pull the straps ght by the
harness adjustment strap, and
make sure the ghtness is
comfortable to your kid.
The correct belt height of the shoulder pads is aained
when the strap disappears into the shell slightly above
the shoulder of the child.
Make sure that the harness straps fit properly over the
shoulders of the child.
Click
Loosen the harness straps and
open the harness buckle, then
place the harness straps to the
sides of the car seat.
Put the baby into the car seat.
3.4 Tightening the harness
CAUTION
Pull the straps end straight towards you, not upwards or downwards.
aaaaaaaaaaaaa
Please pay aenon to the strap end. Whilst traveling (especially outside
the car) it should always be aached to the cover.
09 10
Installaon in the vehicle
4.1 Installaon of Group I and it is for the children whose
weight between 9-18kg.
Group I : Forward facing installaon(suitable for the child weighing
from 9kg to 18kg)
Place seat on the vehicle seat without any incline,
ensuring its backrest be placed firmly against the
vehicle seat.
NOTE:
Before place the restraint, please ensure
the vehicle seat back is end long.
The harness strap could not be twisted.
The restraint backrest must be placed
ght against the vehicle seat, without gap.
Enter into the buckle tongue unl you hear
a clear “click”. Then ghten the vehicle belt
by pulling back the slack parts. Make sure
the seat is stable and secure.
Please do not leave your child unaended in the child safety
seat in the vehicle.
Pull the 3 point belt (lap and
shoulder belt) through the belt
guides at the backrest & boom
part of the car seat.
3.3 Securing your baby using the harness

Before the installaon, please take away the
Harness system of baby car seat.
Note: The Baby insert, Harness strap, Harness
buckle, Buckle pads& Shoulder pads should be
stored away safely for future use ( see 5.1
Removing the 5-point harness system and cover ).
4.2 Installaon of Group II/III and it is for the children
whose weight between 15-36kg.
5
Pull the 3 point belt (lap and shoulder belt)
through belt guide slot at the car seat base
and back part of the car seat, please confirm
seat belt lays flat and is not twisted. Choose
proper height of shoulder belt slot at the
back part of the car seat to fit child’s body.
Put the two buckle clips together then fasten
buckle and harness clips unl you hear a
noce able “click”.
11 12
Installaon in the vehicle Care instrucons
5.1 Removing the 5-point harness system and cover
Pull two harness straps out
off cover slot.
Loose the harness strap
and pull strap out off the
strap yoke as shown in
right picture.
Aer above steps, draw whole
strap out from the boom of
seat. Rotate buckle clip to the
shown posion, then take it out
from seat base.
Remove the 5-point harness
system then remove the
headrest cover and the shell
cover.
4.3 Installaon of Group II/III without backrest and it is
for the children whose weight between 15-36kg.
Hold the backrest, then push it over toward
the level.
Press the base with your hand, and pull the
backrest out from base with your other hand.
Place the child car seat on the passenger seat
ensuring it is firmly against the vehicle seat.
Sit your child on the car seat with their back
against the back rest.
Place the seat belt around your child
posioning th lap secon of the safety belt
under both armrests, then harness clips unl
you hear a noce able “click”.
5.2 Refing the 5-point harness system and cover
To refit the 5-point harness system, please refer to the steps how to take
off it then do as the reverse way.

Care instrucons
5.5 Warranty
The warranty period starts from the date of purchase and is valid for a period
of 12 months. The warranty is only applicable to the original owner and is not
transferable. The warranty is only applicable to products that have not been
adapted by the user.
In the case of any defects, the owner is required to return the product to the
retailer. If the retailer can not solve the problem, he must return the product,
complete with a clear descripon of the complaint and a validated purchase
receipt to the manufacturer. Exchanger or return can not be demanded.
Repairs do not constute an extension to the warranty term.
The manufacturer is not liable for any damages other than those on products
supplied.
No warranty is given if:
The product is not supplied complete with the validated purchase receipt to
the manufacturer.
Defects are caused by misuse or maintenance which differ from that indicated
in the instrucon manual.
Repairs are carried out by third pares.
Defects are caused by neglect.
Damage or removal of any serial number is found.
If there is normal wear and tear which may be expected from everyday use.
The stated warranty terms and condions have not been sasfied.
Care instrucons
5.3 Cleaning
The cover can be removed and washed with a mild detergent using the washing
machine's cycle for delicate items (30°C). Please observe the instrucons on the
washing label of the cover. The colours of the cover may fade if washed at more
than 30°C. Do not spin, and never tumble dry in an electric clothes dryer (the
fabric may separate from the padding).
The plasc parts can be cleaned using soapy water. Do not use harsh cleaning
agents (such as solvents).
The harness can be removed and washed in lukewarm soapy water.
Cauon! Never remove the buckle tongues from the straps.
Please be sure to use only original seat covers, as the seat cover is important to
the proper funconing of the system. Replacement seat covers are available
from your retailer and or at branches.
The child seat must not be used without the seat cover.
5.4 Checklist
For safety’s sake read through this checklist before you set off.
Check that the harness belt system fits properly and ghtly around your child and
that the shoulder belts are at the correct height.
Check regularly that the belt in the baby car seat is not damaged. If it is damaged
do not use your product in any circumstances and contact your supplier or
importer (see address list in the service card).
Check that you have secured your baby car seat with the seat belt.
If you have any quesons, please contact your supplier.
Make sure that you have the following details to hand:
Serial number underneath on the service card.
Mark and type of vehicle and seat on which the baby car seat used.
Age and weight of your child.
13 14