aidapt VM312 User manual

Page 1
VM312 –Big Button Talking Alarm
Clock

Page 2
BATTERY INSTALLATION
The Clock is powered by 3x AAA
batteries (Not Included)
On the base of the clock you will find the
battery compartment, open compartment
and install the batteries, please ensure the
correct polarity is used once inserted then
replace cover.
INSTRUCTIONS OF USE
There are 3 buttons on this clock:
(S1) Large button on the top
(S2) Bottom of the clock is a small black push
button
(S3) Hi/Lo Volume Switch

Page 3
To Set the Talking Time, Date and Alarm
You only have approx. 10 seconds to change
any value and then the clock will beep to
indicate it has returned to normal.
To Set Hour: Press S2 to set hour (This will
repeat “Set hour”), then press S1 to adjust
hour till the correct time is set.
Set Minute: Press S2 till the clock repeats
“set minute”, then press S1 to adjust minute
Set Year: Press S2 till the clock repeats “set
year”, then press S1 to adjust year
Set Month: Press S2 to set month, then
press S1 to adjust month
Set Day: Press S2 to set day, then press S1 to
adjust day
Set Alarm Hour: Press S2 to set alarm hour,
then press S1 to adjust hour

Page 4
Set Alarm Minute: Press S2 to set alarm
minute, then press S1 to adjust minute
Set Alarm: Press S2 to set alarm, then press
S1 to turn alarm On/Off In setting mode,
clock will return to normal time mode if no
buttons are pressed for 10 seconds
To Use
Press S1 once to hear the time spoken
Press S1 twice to hear the date spoken
Once Alarm Starts Press S1 to silence the
alarm.
Use button S3 to switch the volume

Page 5
SERVICE WARRANTY
Aidapt guarantees the product free from
defects in materials and workmanship for a
period of twelve months.
The product you buy may sometimes differ
slightly from illustrations. This warranty is in
addition to, and does not affect, your statutory
rights.
Our guarantee is administered by our retailers.
If your product arrives damaged, you must
contact the retailer from whom you bought it.
The retailer's contact details will be on the
invoice that arrived with the product, or on the
e-mail you received when you placed the
order. Do not contact Aidapt, only your retailer
can arrange a replacement.
If your product fails within the guarantee
period, and needs to be repaired or replaced,
you must contact the retailer from whom you
bought it.
The retailer's contact details will be on the
invoice that arrived with the product, or on the

Page 6
e-mail you received when you placed the
order.
If you have just received your product and
require technical help in using it, please call
our Help Desk on [phone]
If you have any other technical queries about
the product, please call our Help Desk on
[phone].
Aidapt Bathrooms Ltd.,
Lancots Lane, Sutton,
St. Helens, Merseyside.
WA9 3EX
Website: www.aidapt.co.uk