aidapt VM909B User manual

VM909B
Liquid Level Detector
INTENDED USE
Aidapt’s Liquid Level Detector is ideal for those who are visually impaired. It alerts the user
with sound and vibration alarms when the liquid level in the cup, or glass reaches the pre-
assigned detection level.
BEFORE USE
Carefully remove all packaging and check the product thoroughly for damage or obvious
faults. Avoid using any knives or other sharp instruments as this may damage the surface
of the product.
ASSEMBLY INSTRUCTIONS
1. Flip open the battery cover as indicated in (g 1). Insert battery cell CR2032
into the battery compartment (g 2&3). Flip to close the battery
cover (g 4). To ensure the battery is installed correctly, it should beep twice when
sensor is touched (g 5).
2. Place the Liquid Level Detector on the edge of a cup, or mug (g 6). Add
your drink to the cup, once the liquid reaches the level of the long probes, the
alarm will emit a ‘beep’ sound and sensor vibrates.
6

Fixing and Maintenance Instructions 2
3. When liquid levels reach a short probe (high liquid level probe), you will hear a ‘beep’
sound and the sensor will vibrate.
4. Your Liquid Level Detector can be attached to your refrigerator, or any other
magnetic surface when not in use.
5. You may adjust the liquid detector level by sliding the level up and down.
CARE, MAINTENANCE and YOUR OBLIGATION
Please check the Liquid Level Detector periodically for any signs of damage and if in doubt
do not use and contact your supplier.
DO NOT immerse anything but prongs in liquid.
SERVICE WARRANTY
Aidapt Bathrooms Ltd guarantees the product free from defects in material and workmanship
for a period of one year.
Should this product be operated under conditions other than those recommended, or any
attempts made to service or modify the product, then the warranty is rendered void.
The product you buy may differ slightly from illustrations. This warranty is in addition to, and
does not affect your statutory rights.
Our guarantee is administered by our retailers.
If your product arrives damaged, you must contact the retailer from whom you bought it. The
retailers contact details will be on the invoice that arrived with the product, or on the email
you received when you placed the order. Do not contact Aidapt Bathrooms Ltd, only your
retailer can arrange a replacement or refund.
If your product fails within the guarantee period, please contact the retailer from whom you
bought it.
If you have received your product and require technical help, please call our help desk on
01744 745 000
A copy of the instructions leaet can be downloaded from our website.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Web: www.aidapt.com Email: [email protected]