AIO CM1-AIO Instruction Manual

Instruction of use
Model: CM1-AIO
AIO - Instruction of use
Version 2, Date: 16.06.2020

TABLE OF CONTENT
1. Introduction 3
1.1. Ozonation- AIR 3
1.2. Ozonation - WATER 4
1.3. Ionization 4
1.4 Aromatherapy 4
1.5 Ultrasonic Humidification 4
2. Packing List 5
3. Technical Parameters 5
4. Installation & Settings 6
4.1 Device Installation 6
4.2 How to set a device? 6
4.3 Control buttons 8
4.3.1 DESCRIPTION OF CONTROL ELEMENTS 8
4.3.2 DESCRIPTION OF FUNCTIONS 8
4.3.3 HOW TO SET A TIME OF OZONATION? 9
ITEM OZONATION 10
WATER OZONATION 11
5. Safety Regulations 13
5.1. Basic Information 13
5.2. Symptoms of ozone poisoning 13
5.3. Safety notes 13
5.4 Label description 14
6. Troubleshooting 14
7. Ozonation process 14
7.1 Room preparation before ozonation 14
7.2 Setting up the device 15
7.3 Process Monitoring 15
7.4 Finishing the Ozonation 15
7.5 General Tips 15
7.6 “How long should the process last?” 15
7.7 Mold removal 15
7.8 Warnings 15
8. Other uses 16
9. General conditions 16
9.1 Warranty 16
9.2 Repair services 17
9.3 Contact 17
AIO - Instruction of use, Version 2, Date: 16.06.2020 2/16

Copyright
The instruction of use is protected by copyright and all rights are reserved.
The content of this manual may be changed without notice to improve the quality.
© 2020 CM International S.A.
CM International S.A. is the owner of the copyright of the instruction manual.
Trade name of the device: AIO
Reproduction of this manual in part or in whole or reproduction in other media without the
express written permission of CM International S.A is prohibited.
Copies resulting from the consent of the copyright owner must contain the content in an
unchanged form and the same copyright information that has been placed on the original.
Ownership of all other trademarks is attributed to their owner.
This Instruction of Use was issued on 16.06.2020 - Version 2.
1. Introduction
AIO is a modern device designed to purify air and water. Ozone has disinfecting properties. It
kills bacteria, viruses, fungi, allergens, mites and unpleasant odors. One device can provide
a whole new dimension of comfort in your interior.
It is a portable device with 3 options:
- Aromatherapy
- Ionization
- Ozonation
What’s more, you can also use it as ultrasonic humidifier.
Thanks to this device you can ozone air and water, ionize the air, use a humidifier or add
your favorite oils and enjoy aroma therapy.
1.1. Ozonation- AIR
Ozone treatment, so called ozonation, is a method of disinfection without chemicals where
the biocidal factor is ozone, a gas with strong oxidizing properties. Ozone treatment is an
ideal way anywhere in the immediate human environment is required for microbiological
purity and sterility and to obtain an environment free from undesirable odors and various
pathogens.
AIO - Instruction of use, Version 2, Date: 16.06.2020 3/16
NOTE
DO NOT OPEN! ELECTRIC SHOCK HAZARD!
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE
HOUSING. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL

Ozonation is an excellent and environmentally friendly method that not only sterilize areas
where you are but will let you get rid of any unwanted odors from your surroundings.
Ozonation is a safe method, and its main advantage is physical removal of all odors rather
than masking them.
1.2. Ozonation - WATER
Ozonation is a chemical water treatment technique based on the infusion of ozone into water.
Ozone is a gas composed of three oxygen atoms (O3), which is one of the most powerful
oxidants. Ozonation is a type of advanced oxidation process, involving the production of very
reactive oxygen species able to attack a wide range of organic compounds and all
microorganisms. The treatment of water with ozone has a wide range of applications,
because:
- Rapidly reacts with bacteria, viruses and protozoa over a wide pH range
- Stronger germicidal properties than chlorination
- No chemicals are added to water
- Also efficient for organics degradation and inorganics removal
- Removes colour, taste and odour
1.3. Ionization
Ionizer uses an electrostatic charge to remove airborne pollutants, allergens, and other
unwanted particles from the atmosphere in your home. It releases negatively charged ions
into the air, which attract positively charged ions, such as dust and allergens, and then bind
together with them.
Because the ions have bonded together, this makes the troublesome particles much heavier
than they were before. As a result, these over-weighted particles are no longer light enough
to stay airborne and drop to the ground. Once they have landed on the floor, they are much
less likely to be inhaled and can be easily vacuumed up.
1.4 Aromatherapy
Diffusers are a great way to get your home smelling absolutely lovely, with the added benefit
of promoting quality air to help you breathe easy on those dry days. That's because diffusers
release beneficial essential oils into the air. Essential oils are believed to have antiviral,
antifungal, and antioxidant properties. They are released into the air through a diffuser as
aromatherapy and can help people relax and feel less stressed and anxious and may aid in
strengthening the immune system. By distributing these essential oils into the air, diffusers
can even help alleviate sinus and allergy symptoms.
The essential oils which may be used in this device must be water-soluble . Avoid using high
concentrations of essential oils, only a few drops of water-soluble oils, hydroalcoholic odours
or water-soluble perfumes. After pouring the fragrance, gently stir and activate the humidifier.
1.5 Ultrasonic Humidification
Humidifiers are used to increase moisture in the air. They're useful for helping you breathe
better, relieving dry skin, and ameliorating cold symptoms by reducing dryness and irritation
of the nose and throat. Humidifiers release humid air into your home, which may also help kill
AIO - Instruction of use, Version 2, Date: 16.06.2020 4/16

the flu virus. As an added benefit, humidifiers can even help lessen snoring because the
moisture they provide keeps the throat from drying out.
An ultrasonic humidifier is one that uses high-frequency sound vibrations to produce an extra
fine water mist that is then expelled to add moisture to the room. The ultrasonic generally has
no filter factored into its design. That does save operation costs.
2. Packing List
3. Technical Parameters
AIO - Instruction of use, Version 2, Date: 16.06.2020 5/16
The package includes
Name
Pieces
Device
1
Cable with power supply
1
Silicone Hose
1
Air bubble stone
2
Aluminium box
1
Instruction of use
1
General Specification
Model No.
CM1-AIO
Input
12V 30W
Ozone Output
1000 mg/h
Working Time (ozone)
5 min - 2h
Dimensions
15cm x 36cm x 15cm
Weight
3,5 kg
AC Adapter
12V 60W

4. Installation & Settings
4.1 Device Installation
Check pictures below and see how to connect all accessories and prepare a device to work.
4.2 How to set a device?
Plug the cable into the socket. The device will start working.
AIO - Instruction of use, Version 2, Date: 16.06.2020 6/16
1. Water tank (fill with water + essential oil)
5. Control buttons
2. Tank lid
6. Time selector knob
3. Aroma/Humidifier outlet
7. Ozone outlet / Silicone hose connection
4. Ion outlet
8. Power cord connection (AC adapter)

1. Activating of selected modes:
-Ionization: Button for activating the negative ion generation mode
(ION ON / OFF)
-Aromatherapy / Humidifier: Button for activation aromatherapy mode
(AROMA ON / OFF)
-Ozonation: Button for activation ozone mode
(OZONE ON / OFF)
AIO - Instruction of use, Version 2, Date: 16.06.2020 7/16
NOTE:
If you want to activate Aromatherapy, add few drops of essential oil to the water
.
- Ask distributor what essential oils you can use with a device. Some essential
substances can cause corrosion of the system.
- Do not exceed the amount of essences recommended by the manufacturer, as
the ultrasonic function may not be performed properly.
- Keep the device away from electrical devices. Remember that aromatherapy produces
water fog. Place the device at least 2 meters from the other objects which are not
waterproof.
Remember:
Fill the water tank at the top of the device before start. Turning on
Aromatherapy without water in the tank is prohibited.
The warranty does not cover repair of defects resulting from improper use of the device.
NOTE:
Ozonation and Aromatherapy modes are mutually exclusive - switching on one
turns off the other.

2. Ozonation mode - time settings:
- Single mode: short press of the button
In “Single mode” you can set the time of ozonation from 5 min to 2 hours.
3. Ozonation time controller:
- The settings are divided into 8 steps:
5min - 10min - 15min - 30min - 45min - 1h - 1,5h - 2h
4. Color signaling modes (LEDs above the buttons):
- Ionization mode: Green - active
- Ozonation mode: Red - active
- Aromatherapy mode: Green - active
4.3 Control buttons
4.3.1 DESCRIPTION OF CONTROL ELEMENTS
A. Time selector knob (rotary switch)
B. Negative Ion generator button
C. Ozone generator button
D. Aromatherapy button
4.3.2 DESCRIPTION OF FUNCTIONS
1. Standard Ionization
User can enable or disable the negative ion generator by pressing the ION button (B). Single
press enables the ion generator, second press disables it. When the generator is working
there is a green LED above the button.
AIO - Instruction of use, Version 2, Date: 16.06.2020 8/16
NOTE:
The ionization system makes a better cleaning of the air, since all the air that
passes through the device will be treated directly, but you have to take into account:
- Ionization, produces a small carbon, the result of the destruction of particles that are
electrified by high frequency, so clean the area of entry and exit of air.
- Do not place the device near areas that could be highly flammable, since thousands of
small micro sparks are produced inside the machine.

2. Standard aromatherapy
User can enable or disable the aromatherapy / vaporizer by pressing the Aromatherapy
button (D). Single press enables the aromatherapy module, second press disables it. When
the aromatherapy is working there is a green LED above the button.
3. Ozonation
Ozone generator has 4 working modes, enabled by buttons.
The time selector knob (A) has 8 positions which can be selected by turning the knob.
Selected position is indicated by a little mark on the knob itself.
Available time settings are: 5 minutes, 10 minutes, 15 minutes, 30 minutes, 1 hour, 1,5 hour,
2 hours and constant.
4.3.3 HOW TO SET A TIME OF OZONATION?
For a fast intense cleaning we need to generate 1 ppm of ozone so we will make the
following calculation:
(M3 of our room) x 0.321= Min. working time
Example:
For a 30 m2 room with a height of 2.5 meters would be:
(30 x 2,5) x 0,321= 24,0 min. - so we will program the machine to maximum 30 minutes.
For an intensive deep cleaning we need to generate at least 5 ppm of ozone so we will
make the following calculation:
(M3 of our room) x 1,605 = Min. Working time
AIO - Instruction of use, Version 2, Date: 16.06.2020 9/16
- Do not stick the air inlet or outlet to the wall and avoid obstructing them.
NOTE:
Follow the instructions for starting and using essential oils described in section 4.2
NOTE:
Ozone in high concentrations may be harmful, although it is not considered a
carcinogen or highly dangerous element, if it can be irritating to the respiratory tract with
misuse.
For this reason, follow the recommended instructions carefully:
- SEE instructions in section 7
- The night mode will be used for intense cleaning of those rooms, halls or instances,
without the presence of people or animals.
- Once the configured program has been completed, you will have to wait minimum 30
minutes to be able to access the worked area normally.
- You should not program the continuous mode if you cannot supervise the device.
- If you program continuous mode and you sense ozone outside the room where the
device is operating, ventilate the room and turn off the device.

Example:
For a 30 m2 room with a height of 2.5 meters would be:
(30 x 2,5) x 1,605= 120,3 min. so we will program the device to 2 hours.
a) Single ozonation of air / water / item
By quickly pressing the Ozone button (C) user enables the single ozonation mode. Generator
is working for the selected time and then switches off.
Mode can be used for air, water or item ozonation.
When the generator is working there is a RED led above the button, when it is in standby
(selected time has passed) RED led is off, GREEN led is on.
ITEM OZONATION
Put the items in the aluminium box. You can ozone scissors, combs, masks or other small
items. Then connect one side of silicone hose to the device (see Device Installation 4.1 ) and
place the other side of the hose into aluminium box. See below how the hose should be
inserted.
AIO - Instruction of use, Version 2, Date: 16.06.2020 10/16
NOTE:
this rule is not exact, as it will depend on the temperature, air pressure, room
layout, air flow zones, additional air conditioning systems, etc.
NOTE:
See some of the recommended applications in Section 8.
- When using the water ozone function, connect the hose to the air bubble stone.
- Put a silicone hose with an air bubble stone into the water container and then activate the
"ozone" function on the device.
- Silicone is resistant to the destructive effects of the sun, ozone and gases in the
atmosphere. If you lose your hose or want to buy a new one, remember to choose a 100%
silicone hose without plastic.
NOTE:
Electrical items like phone or smartwatch etc. should not be ozonatated because
ozone may affect their condition. The manufacturer is not responsible for items and
equipment that have been ozonized despite the recommendations in the instructions.

WATER OZONATION
Connect Air bubble stone with silicone hose (see picture below). Fill a glass, jug or bowl with
water. Fill it with at least 3/4 of the contents. (Make sure that the water does not spill outside
when ozonizing). Insert the silicone hose with the air bubble stone into the vessel with water
as shown in the picture below.
Up to 10l of water, the ozonation time is 10min.
The half-life of ozone in water is 30 minutes at 20ºC to, and a few minutes at 50ºC. So, after
2 hours, the ozone almost completely returns to natural oxygen, and until then it acts as a
powerful sterilizer and oxidizer.
After 20 minutes from the end of the ozone process the water can be used for drinking,
cooking, rinsing or brushing teeth.
5. Safety Regulations
WARNING! BEFORE STARTING THE OZONATOR PLEASE READ ALL INFORMATION
BELOW. REMEMBER THAT OZONE IS HARMFUL TO HUMANS, PLANTS OR ANIMALS.
DURING THE PROCESS YOU SHOULD NOT REMAIN IN THE VICINITY OF THE DEVICE
5.1. Basic Information
ppm (one part per million)
1% = 10,000 ppm
1 ppm= 2,14 mg O3/m3
Half-life of approx. 20-30 min
Ozone is almost twice as heavy as air.
NOTE: Ozone is harmful to humans, animals and plants.
Standards:
0.1 ppm - 8 hours
0.3 ppm - 15 minutes
REMEMBER: Use full mask with filter NO (blue)
AIO - Instruction of use, Version 2, Date: 16.06.2020 11/16

5.2. Symptoms of ozone poisoning
- Headache
- Caugh
- Eye Irritation
In case of any symptoms, you need immediately step outside for fresh air
5.3. Safety notes
1. Disconnect the power when in maintenance or repairing.
2. When used to sterilize water, unit shall be above water surface to avoid water flow in.
3. Please do not use in high temperature environment (above 42°C) or places with high
humidity or high oil content.These environments the ozone function may reduce the
effect or shorten the usage life.
4. Never throw or cause any impact on the unit. Never block the air outlet to affect the
air ventilation.
5. Do not contact your eyes or respiratory system with the air outlet to avoid
uncomfortable feeling.
6. When this unit is used in a non-ventilated room to sterilize the air, please leave the
room for 30 to 40 minutes.
5.4 Label description
6. Troubleshooting
Dear customer: When you meet any problems, please try to solve them as suggested below
AIO - Instruction of use, Version 2, Date: 16.06.2020 12/16
Pictogram
Standard No.
Symbol meaning
IEC 60417
Identifies electrical equipment designed for indoor
use.
ISO 15223-1
Indicates the need for the user to consult the
instructions for use.
EN 50419
Indicates a product should not be disposed of in a
landfill.

7. Ozonation process
BEFORE STARTING THE OZONATION PLEASE READ ALL INFORMATION BELOW.
7.1 Room preparation before ozonation
- Locate and dispose of source of the problem
- Take any animals or plants out of the room
- Make sure the room is hermetic (e.g. ventilation vents, doors etc.)
- Take out any works of art.
- Any valuable things can be protected with a stretch foil (e. g. RTV equipment)
7.2 Setting up the device
During the ozonation process thee device should be placed at a higher level (not on the floor,
ozone is heavier than air) To better spread the ozone we can use additional fans.
Leave the room and make sure that nobody enters during the ozonation process.
7.3 Process Monitoring
It is recommended to regularly check if the working area stays hermetic, the ozone should
not diffuse to any outside places like a staircase.
7.4 Finishing the Ozonation
After the generator turns off, wait 30 minutes in order to utilize the prepared ozone. If the
space will be used after the process, ventilate the room for around 15 to 20 minutes until the
ozone concentration is safe (0.1ppm).
AIO - Instruction of use, Version 2, Date: 16.06.2020 13/16
Defect
Analysis
Solution
No air come out from the air
bubble stone
Check silicone hose for
leakage or folds
Smooth the hose or change
a new one
Check whether air bubble
stone is blocked
Change to a new one
Air flows out but no ozone
Ozone generator fails to
work
Contact the manufacturer or
representative
Strange noises while
working
Not enough water
During water ozonation:
Ozone can be easier to
resolve in water when water
depth range is between 20
cm and 40 cm. It can have a
better sterilizing effect.
Resonance with the desk
Place a stable desk

7.5 General Tips
Any large volume room can be divided into smaller ones using a foil. In this case the smaller
spaces can be ozonated one by one. The perceptible smell of ozone does not indicate its
presence. The mist which can be noticed after the process is a natural occurrence caused by
ozone reaction with volatile organic substances.
7.6 “How long should the process last?”
There is no set rule for how long the ozonator should work. The recommended time is
between 15 minutes and 2 hours depending on the type of bad smell in the room. Easy to
neutralise smells include: cigarette smoke, burned food or other smells coming through the
airflow. Among the harder ones are urine, spilled substances and other smells originating
from liquids that sinked into the floor or walls.
7.7 Mold removal
At first remove the source of the problem, ozone doesn’t rid of the mold inside the walls, only
purifies the surface. The infected area should be drenched with the anti-mold liquid. After the
chemical procedure the ozonation can be carried out in order to eliminate the spores from the
air and neutralize the bad smell.
7.8 Warnings
● The Ozonation mode should not be used by people with odor disorders
● There should be unoccupied space left around the device during the ozonation.
● Do NOT check the ozone generation by smelling the air directly from the outlet
● Short-term high concentration ozone inhalation as well as long-term ozone intake
can cause serious negative physiological effects.
● DO NOT inhale the ozone directly from the device.
8. Other uses
AIO - Instruction of use, Version 2, Date: 16.06.2020 14/16
Application
Time
Effects
Vegetables & Fruits
10-20 min
It kills viruses, removes fertilizer residues, prevents
chronic poisoning and extends food storage time.
Skin and beauty
protection
20-30 min
Ozonated water can remove bacteria inside the pores
and promote metabolism. It can also help with
removing cosmetics debris
Hands and feet
20-30 min
It kills bacteria and epiphytes. It allows you to keep
hands clean, sterile and protect against infection.
Clothes & Uniforms
5-10 min
Ozonated water can effectively deodorize fabrics and

You can ozone oils in the same way as water, but keep in mind that ozone in oils takes
longer to be eliminated, if you want to keep the ozone longer active in the product, keep the
product in the refrigerator. Depending on the amount of ozone added to the oil, it can last up
to 12 hours before it becomes oxygen, and up to 2 hours in water.
Always use a different air bubble stone to ozonate water and to ozonate other types of
products such as creams, hygiene products, etc., to avoid cross-contamination of chemical
compounds.
Before ozonating creams or other similar topical compounds, make a previous test, because
in many cases the density of the product or its chemical structure makes the ozonation
incompatible. Some creams when ozonized acquire new properties but may lose others,
such as its aroma, molecular structure, etc.
It is suggested to use the cream immediately after finishing the ozonation process. In this
way, the ozone will have a disinfectant and primer effect on the skin. But do not let the cream
rest after ozonification, because it can change its active principle, depending on its
composition.
9. General conditions
9.1 Warranty
The manufacturer provides a 24-month warranty period for Ozone generator AIO. The
warranty period is counted from the date of sale.
The warranty consists in repairing the device or replacing parts by an authorised service
centre or manufacturer.
The warranty covers production defects of the device that prevent proper use. It covers
defects occurring due to causes inherent in the product or hidden manufacturing defects.
The conditions for the use of warranty rights are primarily:
1) proper use
2) proceeding according to the Instruction of use.
3) proper maintenance of the device
The warranty covers only the device used in accordance with its destination, i.e. in
accordance with all conditions, i.e. properly installed, used, and maintained in accordance
with the instruction manual observing the proper wiring and using according to identified
electric values, scope of operation, and environmental conditions.
CM International S.A. is not liable for indirect and incidental damages, including loss of
profits, damage to property, and other unspecified items.
AIO - Instruction of use, Version 2, Date: 16.06.2020 15/16
kill bacteria.
Teeth
10-15 min
Ozonated water kills bacteria in the mouth. It reduces
odor (especially in smokers). Effectively reduces pain
when brushing your teeth and helps with teeth, mouth
and throat healing.
Items
10-15 min
Cleans and sterilizes tools, items etc.

Warranty exclusions
The warranty does not cover consumables.
The warranty also does not cover:
1) damages resulting from random events (electrical damage, fire, flooding, flood, etc.),
2) mechanical damage caused during the use of the device,
3) damages resulting from installation and operation of the device in conditions or in a
manner inconsistent with the manufacturer's specification, abuse or damage caused by
user's fault,
4) modification or service by a company that is not an authorised repair service partner of CM
International S.A., using spare parts not provided by CM International S.A.
5) damage resulting from the use of consumables not recommended by the manufacturer,
The buyer is obliged to deliver the complete product along with the accessories to the official
distributor or directly to the manufacturer's premises, stating the reason for the complaint.
After delivery of the device, the product will be carefully verified by the manufacturer in terms
of proper use of the ozone generator.
By considering a complaint, we refer to notifying the customer electronically about the
decision of CM International S.A. regarding the complaint.
If the device is not considered defective or does not meet the warranty conditions, CM
International S.A. may charge the Customer with the cost of spare parts, shipment,
diagnostic tests or service.
9.2 Repair services
All repair services should be carried out by qualified repair service personnel authorised by
the manufacturer or directly by CM International S.A once a year.
The authorised repair service is provided by exclusive distributor.
9.3 Contact
Manufacturer:
CM International S.A.
ul. Polna 24i, 51-361 Wilczyce
+48 881 337 882
Distributor:
………………………………………………
AIO - Instruction of use, Version 2, Date: 16.06.2020 16/16
Table of contents
Popular Portable Generator manuals by other brands

Baumer
Baumer HUBNER TDPZ0,2 LT-4 B10 55 Mounting and operating instructions

Landa
Landa HS Series Operator's manual

Briggs & Stratton
Briggs & Stratton 14000 Series installation instructions

Stihl
Stihl WP 300.0 instruction manual

Champion Global Power Equipment
Champion Global Power Equipment 201188 Operator's manual

Generac Portable Products
Generac Portable Products GP Series owner's manual