RUNHOOD HE1200-UK User manual

BEFORE USING THIS PRODUCT
WARNINGS
PRODUCT USE
CHARGING
PRODUCT STORAGE AND TRANSPORTATION
BATTERY DISPOSAL
PRODUCT MAINTENANCE
TRAVEL NOTICE
INTRODUCTION TO MODULES
HOST ENGINE 1200 (HE1200-UK)
AC ENGINE (AE80-B)
DC ENGINE (UE256)
ENERGY BAR (EB324)
ACCESSORIES
648Wh 1200W (HE1200-UK + EB324 * 2)
324Wh 80W (AE80-B + EB324)
324Wh 256W (UE256 + EB324)
CHARGING METHODS
GUIDANCE ON CHARGING FOR EB324 WITH HE1200-UK
GUIDANCE ON CHARGING FOR EB324 WITH UE256
INSTRUCTIONS FOR CONNECTING MULTIPLE PHOTOVOLTAIC PANELS
CONTENTS
PRODUCT SAFETY GUIDELINES
RUNHOOD PORTABLE POWER STATION
1
1
1
1
2
2
2
2
2
3
3
3
11
12
13
16
17
17
18
19
GUIDANCE ON CHARGING FOR EB324 WITH PHOTOVOLTAIC PANEL AND PHOTOVOLTAIC ADAPTER
19
20
18
DIY SCHEMES
16
14
PORTABLE POWER STATION
USER MANUAL
Warnings
1. Keep this product dry and do not expose it to high temperatures or
environments where it may be splashed or immersed in water.
2. Inappropriate use of the product may result in fire hazards leading
to property damage or personal injuries.
3. Adhere to local laws and regulations in battery recycling and
battery disposal.
4. Use caution when transporting the product.
5. Children and individuals with disabilities should operate the
equipment under supervision.
230V 50Hz

PRODUCT SAFETY GUIDELINES
BEFORE USING THIS PRODUCT
Please read all instructions carefully before starting the RUNHOOD Portable Power Station.
PRODUCT USE
CHARGING
PRODUCT STORAGE AND TRANSPORTATION
BATTERY DISPOSAL
PRODUCT MAINTENANCE
1
2
TRAVEL NOTICE
WARNINGS
Keep the RUNHOOD Portable Power Station away from moist. Do not expose the product to high temperatures, water leaks or water
immersion.
Do not disassemble or remove the protective cover.
Do not puncture or burn the product or accessories.
Please recycle and dispose of the RUNHOOD Portable Power Station according to local regulations.
When using or disposing of the RUNHOOD Portable Power Station, please pay attention to safety.
Children and disabled individuals should operate this device under supervision.
Improper use of this product may result in fire hazards, leading to property damage or personal injuries. This product can only be
used according to safety guidelines.
Do not expose the RUNHOOD Portable Power Station to liquids or environmental conditions as rain, snow, or hail.
Do not immerse the RUNHOOD Portable Power Station in water. If this product becomes wet or submerged, chemical breakdown
of the battery may lead to combustion. In such a case, please contact our service department for assistance.
Only the RUNHOOD battery is recommended for this product. RUNHOOD POWER INC. assumes no responsibility for any damage
caused by using non-RUNHOOD batteries on the part of the customer.
The discharging temperature for the Energy Bar EB324 is in the range of -68 ~ 113°F/-20 ~ 45℃ and the charging temperature in
the range of 32 ~ 104°F/0 ~ 40℃. Failure to meet these requirements during charging and discharging may result in danger,
permanent damage to the product, or decreased performance.
It is recommended to use this product in the range of 68 ~ 77°F/20 ~ 25℃ as the battery life after a full charge may be negatively
affected by applications outside this temperature range.
Failure of the Battery Control Board may occur when the battery is operating in strong electrostatic or electromagnetic
environments. Additionally, this may further bring about serious risks during use.
Do not puncture the product as this may result in material leakage inside the product or fire hazards.
Avoid using the product if it is under severe impact.
If the product is immersed in water during use, please take it out from the water immediately and place it in a safe and open place.
Maintain a safe distance to the product until it is completely dried. Dispose of it according to the instructions in the battery handling
section below. Under no circumstances shall the battery that has been submerged or immersed in water be reused.
Should the product catch fire, it is recommended to use fire extinguishing equipment in the following order: water, sand, fire
blanket, dry powder extinguisher, and carbon dioxide extinguisher.
Do not place this product in a microwave oven or a pressurized container.
Do not insert pins, wires, or other metal objects into the enclosure, the socket, or the control device. This may damage the
equipment and threaten personal safety.
Avoid collisions.
Do not place heavy objects on the equipment.
Clean the socket and surface of the Power Station to avoid wear, energy loss, and charging faults.
Dispose of the battery shall be carried out only when it is completely discharged. As the battery contains hazardous chemicals,
please follow local regulations regarding battery disposal and recycling.
Lithium batteries and devices with a capacity greater than 160Wh are not allowed on-board the air plane. Therefore, do not bring
this product on-board an air plane.
Always use the charging cable approved by RUNHOOD POWER INC. RUNHOOD POWER INC. assumes no responsibility for any
damage caused by using non-RUNHOOD approved cables on the part of the customer.
Please place the product in an environment free from flammable materials or combustible materials for charging. Avoid leaving
the Power Station unattended during charging to prevent accidents.
After supplying power to high-power appliances for a long time, charging the Portable Power Station may not be allowed
under thermal protection. In this event, cool the product down to room temperature. The ideal temperature range for
charging is 71°F to 82°F (22°C to 28°C). Charing in this temperature range also extends battery life.
Keep the product out of reach by children. Should a child swallow any component of the product, seek medical care immediately.
Before storing this product, charge the battery to at least 60% of its full capacity. Otherwise, long-term storage may damage
the battery. It is recommended to charge and discharge the battery every three months.
Do not place the product against direct sunlight or close to a heat source.
Store the product in a dry place. Avoid placing it in areas where it may come into contact with water.
Do not store or transport the device with glass, watches, jewelry, or other metal items.
Do not store the product at temperatures below -20°C or above 60°C.
Should the product not to be used for an extended period, the battery life may be shortened.
Charge and discharge the battery completely at least once in every three months to maintain battery capacity.

Note: The Host Engine of the RUNHOOD Portable Power Station cannot be used alone.
It must be used in tandem with the Energy Bar (EB324). Please refer to sections "DIY
Schemes" and "Charging Methods" for instructions on DIY combination.
INTRODUCTION TO MODULES
RUNHOOD PORTABLE POWER STATION
HOST ENGINE 1200 (HE1200-UK)
1. THE LED FLASH LIGHT
2. THE MAIN POWER ON/OFF
3. DC INPUT: THE POWER ADAPTER/THE CAR CHARGING CABLE WITH A 6530 CONNECTOR /THE SOLAR PANEL CHARGING CABLE
4. AC ON/OFF
3
4
There are three modes of light emission from the LED flash light as: strong, weak, and S.O.S. signal flashing. Press the button once to
emit the strong light. Press the button for a second time to emit the weak light. Press the button for a third time to emit the S.O.S.
signal. Press the button for a fourth time to turn off the LED flash light.
Press and hold the power button to turn on or turn off the RUNHOOD Portable Power Station. Press and hold for 1 second to turn it on;
Press and hold for 3 seconds to turn it off. When the RUNHOOD Power Station is turned on, the LCD screen lights up. Press the power
button, adjust the brightness of the LCD back light, and keep the RUNHOOD Power Station running. If the RUNHOOD Power Station
becomes idle for 5 minutes, the brightness of the back light for the LCD is to be tuned down. If the Portable Power Station becomes idle for
more than 20 minutes (idle means that there is no charging or discharging), the RUNHOOD Portable Power Station automatically turns off.
With the DC6530 connector as the DC input port, there are three charging methods for HE1200-UK: charging with the adapter of the
RUNHOOD Power Station, charging with the car charging cable with a 6530 connector, and charging with the PV charging cable. It supports
parallel connection of PV panels. To protect the system, the DC input limits the input power to a maximum of 200W. It supports input of
12V/24V at a maximum of 10A from a car charging port. (Ensure that the engine is started to avoid battery depletion).
Press the AC ON/OFF button to turn on or turn off the AC power output from the RUNHOOD Portable Power Station. When the AC output
is powered on,both the indicator in the AC ON/OFF button and the "AC" icon in the LCD will be illuminated. When the AC output is
powered off, both the indicator in the AC ON/OFF button and the "AC" icon in the LCD will not be illuminated. When the energy in the
Portable Power Station decreases to a level of 0%, the AC output will be cut off. Accordingly, the AC indicator and the "AC" icon in the LDC
will not be illuminated. When the energy in the Portable Power Station increases to a level over 2%, the AC output returns to normal. In the
event of an overload, although the AC output stops working, the AC indicator will remain lit. At the same time, the "AC" icon and the
"OVERLOAD" icon on the LCD display will flash together with a warning beep to remind you that the power source is being protected. Press
the AC ON/OFF button to reset.
5.DC ON/OFF
Press the DC ON/OFF button to turn on or turn off the DC output from the RUNHOOD Power Station. The corresponding indicator is
illuminated accordingly. This button has the control over the car charging output port, one wireless charging pad, two USB-C output ports,
and two USB-A output ports of the RUNHOOD Power Station. When the adjacent USB-A ports and USB-C ports are used simultaneously,
the output voltage becomes 5V. When the overload indicator and DC indicator (or the USB-A indicator or the car charging port indicator)
flash simultaneously with the buzzing, it means that the relevant output is cut off. Please disconnect the Power System and press the DC
ON/OFF button to reset. When the remaining energy of the Power Station decreases to a level below 2%, the DC output is cut off. If the DC
ON/OFF is pressed, the DC output remains failure. The buzzer then alarms three times. In this case, it is necessary to charge the Power
Station. If the energy of the Power Station exceeds a level over 2%, it will return to normal.
6. THE ON-BOARD CAR CHARGING PORT
The on-board car charging port supports a maximum output current of 10A and can be used for general equipment on-board. It can be
used to charge the 12V lead-acid battery in the car (It must be operated under the guidance of a professional). This is not a feature that can
help you to start a successful ignition immediately. However, it helps to charge the lead-acid battery in the car to a certain level, making it
convenient for the car to start a successful ignition with the battery. The actual charging time depends on the real-time status of the car.
1
2
4
5
8
9
6
7
311
10 12 13
1
2
3
4
5
6
7
8
9
10
11
12
13
LED FLASH LIGHT
MAIN POWER SWITCH ON/OFF
DC INPUT: THE POWER ADAPTER/THE CAR CHARGING
CABLE WITH A 6530 CONNECTOR /THE PV
CHARGING CABLE
AC ON/OFF
DC ON/OFF
THE CAR CHARGING PORT
USB-A * 2
THE WIRELESS CHARGING PAD
USB-C * 2
230V AC SOCKET * 2
LCD
CHARGING OVERLOAD PROTECTION SWITCH
230V AC INPUT

6
7
1
OVERLOAD ALARM
This display is used to indicate various working status of the product. Please refer to Section 11.2.
2
TIME REMAINING FOR CHARGING AND DISCHARGING
3
BATTERY LEVEL INDICATOR
The remaining battery level is displayed. The icon rotates during charging.
4
REAL TIME INPUT POWER
The input power of HE1200-UK is displayed.
5
PERCENTAGE OF REMAINING POWER
The percentage of remaining power is displayed.
REAL TIME OUTPUT
The real time output power of HE1200-UK is displayed. The output power value flashes when the discharging current exceeds 90% of the
value allowed.
ENERGY BARS AVAILABLE
When the Energy Bar EB324 is installed, the battery icon displayed on the HE1200-UK shows that the EB324 has been installed normally
and is engaged in working.
8
THE FAN INDICATOR
The rotation of the fan icon indicates that the fan is in normal working status.
9
INDICATOR OF WORKING STATUS OF THE PORT
Working status of the USB-A port, the USB-C port, the car charging port, the DC port, and the AC port are displayed.
10
LOW TEMPERATURE ALARM
11
HIGH TEMPERATURE ALARM
12
MAIN FAULTS
11.2 ALARM INFORMATION AND DESCRIPTION
5
6
Icons
Alarm messages
USB-A overload
USB-C overload
Operating instructions
7. USB-A QC 3.0
It can be used to charge various devices, such as smart phones, tablets, cameras, speakers, and other devices that can be charged
through USB ports, with a maximum output power of 28W per port (for devices that support the QC 3.0 charging protocol).
8. WIRELESS CHARGING PAD
It can be used to charge mobile phones and other devices suitable for wireless charging with a maximum power of 15W (The actual
charging power depends on the device).
9. USB-C PD3.0 100W
It can be used to charge devices including laptops, tablets, smart phones, and other devices with USB-C ports, with a maximum
power of 100W per port (for devices that support the PD3.0 charging protocol).
10. 230V AC SOCKETS
Two sockets supplying 230V pure sine wave AC power are designed to provide your devices with a maximum rated power output
of 1200W. This product does not support devices with power rates greater than this value. Please check and confirm before use of
this product to avoid property damages and personal injuries.
This number represents the time remaining for charging/discharging based on the current working status of HE1200-UK in minutes
or hours. The time remaining for charging is displayed during charging. Similarly, the time remaining for discharging is displayed
during discharging. When the Power Station is engaged in charging and discharging simultaneously, the time remaining for
discharging is displayed.
A low temperature alarm icon appears on the display, indicating that the temperature of HE1200-UK is too low. In this case, charging
or discharging is prohibited. Please place the product in a place with a normal room temperature and wait until it returns to operating
temperature.
When the temperature of HE1200-UK is too high, a high temperature alarm icon appears on the display, indicating that the product
temperature is too high. In this case, charging or discharging is prohibited. Before using, cool the product down to the normal working
temperature.
When a major malfunction arises in the BMS, the battery, the main control board, the inverter, or the internal communication, an
exclamation mark appears on the display.
Various icon combinations displayed in the RUNHOOD Power Station suggests the following alarm messages respectively.
11. LCD
This display is used to indicate various working status of the product.
11.1 AN INTRODUCTION TO THE CONTENT OF THE LCD
The USB-C icon and the OVERLOAD icon flash simultaneously with
the buzzing. In this event, the Power Station automatically resets
after removing the load.
1
2
3
4
5
6
7
8
9
1011
12
OVERLOAD
The USB-A icon and the OVERLOAD icon flash simultaneously
with the buzzing. In this event, disconnect the device and
press the DC ON/OFF button to reset.

8
Inverter output
overload
High temperature
7
Car charging
port overload
Wireless charging
port overload
The Car icon and the OVERLOAD icon flash simultaneously
with the buzzing. In this event, disconnect the device and
press the DC ON/OFF button to reset.
The DC icon and the OVERLOAD icon flash simultaneously
with the buzzing. In this event, disconnect the device and
press the DC ON/OFF button to reset.
The AC icon and the OVERLOAD icon flash simultaneously
with the buzzing. In this event, press the AC ON/OFF button to
reset.
The high temperature icon displayed together with the buzz-
ing suggests that the temperature of the battery is too high. In
this event, disconnect the device. The Power Station conse-
quently stops charging or discharging. Place the product in a
well-ventilated area and wait for the equipment to cool down
for automatic reset. If the Power Station is not yet reset prop-
erly, please contact our product experts via email:
[email protected]
Low temperature
Major faults
Fan warning
The low temperature icon displayed together with the buzzing
at the same time suggests that the temperature is too low. The
battery resultantly cannot function. In this event, please discon-
nect the device previously connected. When the low tempera-
ture icon flashes and the buzzer alarms at an increasingly higher
frequency, the Power Station stops all charging and discharging.
After the ambient temperature of the Power Station returns to
its normal operating temperature range, the Power Station
automatically resets. If the Power Station is not yet reset proper-
ly, please contact our product experts via email: service@run-
hoodpower.com.
When this icon is displayed, it indicates that a major fault is
arising from the device. First, check if there is any strong electro-
static or magnetic field in the operating environment for the
Power Station, then restart the Power Station. If the Power
Station is not yet reset properly, please contact our product
experts via email: [email protected].
If the fan icon is displayed without not rotating, check if the fan
is blocked. Before using it again, turn off the device and clean
the device carefully. Use a vacuum cleaner to clean around all
vents. If the Power Station cannot work properly, please contact
our product experts via email: [email protected].

HE1200-UK SPECIFICATIONS
9
10
12. CHARGING OVERLOAD PROTECTION SWITCH
When the input current remains greater than 20A during charging, protection will be activated onto the AC charging port (as
indicated by the button popping out). After confirming that the equipment is not faulty, press the protection switch to reset and
consequently resume charging.
13. 230V AC INPUT:
Connect the AC charging cable to the universal clover-shaped port and the other end to the AC power supply. This product also
features a UPS function, which means that you can plug it into AC socket on the wall and continue to use the AC socket of this
product. When the power grid suddenly fails, power supply from the AC socket of this product can be automatically switched to
the battery power mode within 20ms, continuing to protect your work. (This function is not a professional-level UPS function and
does not support 0ms switching. Please do not connect it to devices with high requirements for Uninterrupted Power Supply. You
can also confirm its applicability after multiple tests for compatibility as in application scenario for data servers and workstations).
Buzzer reminder
Battery warning
If two battery icons are displayed at the same time, it indicates
that the system has two batteries working simultaneously. If only
one battery icon is displayed and the other is not displayed or
flashing, (It does not indicate a state of a system fault. A contin-
uous charging and discharging would release this state.) it
means that only one battery is working and the system would
reduce the maximum output power.
The system has a buzzer reminder for Low Battery Warning.
When the energy is below 5% of its full capacity, the buzzer
rings periodically. In this event, the output can be turned off
with the power switch. Additionally, the Power Station can also
be charged.
Fault Alarm Level One: The buzzer sounds for 0.1 second in
every 2 seconds. It only reports faults when the system is still
working normally. The buzzer can be turned off with the power
switch. Fault Alarm Level Two: The buzzer sounds for 0.1
second in every 0.2 second. The system resultantly stops all
charging and discharging.
Model
HE1200-UK
Net weight
Approximately 4.9 kg
Size
32 * 20 * 21cm
Capacity
Maximum 648Wh
The Solar panel supports a maximum of 15V-23V 10A and MPPT.
Power adapter 180W
The maximum AC input power is 400W (230V 50Hz)
Car charging port with a 6530 connector 12V 10A 120W
Input
Charging with AC input
Fast charging
2 * Pure sine wave AC output 230V 50Hz rated 1200W (peak value 2400W)
AC output
-68~113°F / -20~45°C
Discharging temperature
32 ~ 104°F / 0 ~ 40°C
Charging temperature
DC output
1 * Wireless charging pad 5/10/15W
1 * Car charging port 12V 10A maximum 120W
2 * USB-A with a maximum power for each: 28W (5V DC/3A, 9V DC/3A, 12V DC/2.4A)
2 * USB-C with a maximum power for each: 100W (5V DC/3A, 9V DC/3A,
15V DC/3A, 20V DC/5A)）

DC ENGINE (UE256)
1. USB-C PD 100W INPUT/OUTPUT
AC ENGINE (AE80-B)
1. THE AC POWER SOCKET
Model
Net weight
Size
Output
Discharging temperature
AE80-B
0.72 lbs./approximately 0.33 kilograms
4.3 * 2.3 * 4.1 inches/11 * 5.7 * 10.3 centimeters
Pure sine wave 230V AC (50Hz), 80W (peak 160W)
-68~113°F/-20-45°C
AE80-B SPECIFICATIONS
11
12
2. WORKING STATUS INDICATION
The white indicator: normal; Output 230V.
The red indicator: abnormal; Output 230V failure.
1
2
3
1
2
3
USB-C PD 100W input/output
USB-A (* 2) QC3.0 28W output
USB-C PD 100W output
It supports appliances with a rated power of 80W or less. This interface does not support all appliances with a rated power exceeding
80W. Please confirm whether the device is applicable before using to avoid negative effects.
Input: The USB-C port supports 100W input.
Output: The USB-C port can be used to charge devices including laptops, tablets, smart phones, and any other devices with USB-C
ports.
2. USB-A (* 2) QC 3.0 28W OUTPUT
The USB-A port can be used to charge devices including smart phones, tablets, speakers, and any other devices with USB-A ports.
3. USB-C PD 100W OUTPUT
Output: The USB-C port can be used to charge devices including laptops, smart phones, tablets, and any other devices through the
USB-C port.
1
2
1
2
AC socket
Display of working status

1
2
1
2
ENERGY BAR (EB324)
ACCESSORIES
THE AC ADAPTER THE AC CHARGING CABLE THE CAR CHARGING CABLE WITH A 6530 CONNECTOR
UE256 SPECIFICATIONS
Model
UE256
Working temperature
-68-95°F/-20-35°C
Net weight
0.49 lbs./approximately 0.22 kilograms
Size
2.4 * 2.3 * 4.1 inches/6 * 5.7 * 10.3 centimeters
Input
1 * USB-C PD maximum 100W (5V DC/3A, 9V DC/3A,
15V DC/3A, 20V DC/5A)
Output (total power 256W)
2 * USB-C PD maximum 100W (5V DC/3A, 9V DC3A, 15V
DC/3A, 20V DC/5A) with a maximum total power of 200W.
2 * USB-A QC3.0 with a maximum power of 28W
(5V DC/3A, 9V DC/3A, 12V DC/2.4A)
with a maximum total power of 56W.
Model
EB324
Net weight
3.9 lbs./approximately 1.77 kilograms
Size
10.2 * 2.3 * 4.1 inches/26 * 5.7 * 10.3 centimeters
Capacity
324Wh
Battery
Lithium ion NMC
Discharging temperature
-68-113°F/-20-45°C
Charging temperature
32-104°F/0-40°C
Product life
1000 times (80%)
EB324 SPECIFICATIONS
13
14
Battery indicator
ON/OFF
Note: Only accessories for maximum power of 12V 10A 120W are provided.
1. Battery indicator: Each indicator represents 20% of the energy capacity. When all 5 indicators are on, it indicates that there is 80%
-100% battery power remaining. When all 5 indicators are flashing once every 1 second, it indicates that the Energy Bar 324 is abnormal.
2. ON/OFF: Press and hold the button for 1 second to turn on the power. Press and hold the button for 3 seconds to turn off the power.

INR22/71[(3P6S) 2P] E /-20+45/80
THE CABLE FOR PARALLEL CONNECTION OF SOLAR PANELS
Note: The DC6530 connector is provided.
THE SOLAR PANEL
Note: RUNHOOD Seri 100W, 15V-23V is recommended.
DIY SCHEMES
15
16
648Wh 1200W (HE1200-UK + EB324 * 2)
THE CHARGING CABLE USED WITH SOLAR PANELS
This is a 648Wh, 1200W Power Station. This scheme includes a Host Engine (HE1200) and two Energy Bars (EB324). The product is very
light, weighing only 8.3 kilograms. Replacing the battery facilitates longer run time for the Power Station. With an additional pair of
EB324, the Power Station can easily facilitate a capacity of 1296Wh.
THE SOLAR ADAPTER

324Wh 256W (UE256 + EB324)
CHARGING METHODS
17
GUIDANCE ON CHARGING FOR EB324 WITH HE1200-UK
18
324Wh Energy Bar can facilitate 80W AC output with an "adaptive AC converter".
324Wh 80W (AE80-B + EB324)
Adapted with a DC converter with 2 USB-C PD 100W output ports and 2 USB-A QC3.0 28W output ports, the Energy Bar with a
capacity of 324Wh can be used to provide a maximum total output power of 256W.
Important note: The Energy Bar is EB324. Other modules are only application interfaces, not Energy Bars. There are two ways to charge
EB324: one with HE1200-UK, and the other with UE256. If a EB324 is to be charged, it is necessary to connect it with HE1200-UK or
UE256. It is recommended to charge EB324 in pairs.
1. Insert two Energy Bars EB324 into the Host Engine HE1200-UK.
2. Connect the Power Adapter/the Car Charging Cable with a 6530 connector/the solar panel to the DC input port in the Host Engine
HE1200-UK.
3. Quick charging: By utilizing AC, charging for EB324 can be proceeded faster.
4. Do not remove EB324 from UE256 during charging.

GUIDANCE ON CHARGING FOR EB324 WITH UE256
GUIDANCE ON CHARGING FOR EB324 WITH PHOTOVOLTAIC PANEL AND PHOTOVOLTAIC ADAPTER
INSTRUCTIONS FOR CONNECTING MULTIPLE SOLAR PANELS
19
20
This symbol represents that the product is a Class II equipment.
This symbol represents that the product needs to be kept away from fire.
This symbol indicates that the product needs to be kept away from water sources.
This symbol indicates that the product must be taken to an electrical and electronic waste
collection point for recycling and disposal.
1. Connect the EB324 to the UE256.
2. Connect the charging cable to the USB-C PD 100W input/output port for charging.
3. Do not remove the EB324 from the UE256 during charging.
4. The USB-C charging cable and power adapter are not included in our product range.
Users can purchase cables and adapters from the market according to their preferences.
1. The DC input of HE1200-UK can reach a maximum of 200W. A maximum of two Solar Panels can be used for charging.
2. Use the cable for parallel connection of Solar Panels to complete the connection of two sets of Solar Panels.
3. If HE1200-UK or UE256 is to be used in charging, please refer to charging instructions above.
1. Open the protective cover of the solar adapter cable, connect the Energy Bar to the solar adapter correctly.
2. Connect the input port of the solar adapter to the solar panel (or adapter, car charger cable). (The parallel connection of solar
panels can increase input power).
3. Charging starts automatically (If the Energy Bar is not powered on, it powers on automatically); During charging, the indicator
flashes (with on for 0.5s at 1.5s intervals).
4. After the Energy Bar is fully charged, the indicator stops flashing and remains on constantly.