Aiper Seagull Pro User manual

Aiper Seagull Pro
User Manual
ROBOTIC POOL CLEANER

Thank you for choosing Aiper.
You’ ve now joined a family of millions who have already put their trust
in Aiper to take care of their pools and are enjoying the convenience
of a pristinely clean pool.
This user manual will help you maintain your Aiper pool cleaner and
ensure it performs at its maximum eciency for years to come.
Please take a few minutes to read through this manual.
If you have any questions, please visit our website at www.aiper.com and
contact our customer service team for assistance or more information.
1
Aiper Customer Service:
Scan for
Video Guide
Scan the QR
Code to Access
Customer Support
US Toll-Free: 1-866-850-0666
AU Toll-Free: [phone]
Email: [e-mail]
Facebook: @AiperOcial

1. Structure 5
-------------------------------------
2. Specifications & Working Conditions 6
--------
3. Using Your Aiper Pool Cleaner 7
---------------
4 Installation 7
-----------------------------------
5. Operating Your Device 9
-----------------------
6. Disassembly and Cleaning 11
------------------
7. Charging 13
-------------------------------------
14
---------------------
8. Maintenance & Storage
16
---------------------------------
9. LED Indicator
10. Packing List 18
----------------------------------
18
-------------------------------------
11. Warranty
Important Safety Precautions 3
-----------------
English
CONTENTS
2

Please read this manual carefully and use your Aiper pool cleaner in
accordance with the manual instructions. Aiper is not liable for any
losses or injuries caused by improper use of this device.
1. Do not operate your Aiper pool cleaner while people or animals are in the pool.
2. Turn the cleaner o while not in use or while performing maintenance.
3. Do not allow children to ride the Aiper pool cleaner under any circum-
stances. Please supervise children when they are around an opera-
tional Aiper pool cleaner.
4. Use only authorized Aiper power adapters.
5. The adapter cord should only be replaced by a qualified electrician or
Aiper Customer Care.
6. It’s suggested to plug the power adapter into a power strip or surge
protector and not directly into an electrical outlet.
7. Ensure your device is powered o and the charging port is dry before
charging. While charging, your Aiper pool cleaner should be kept in a
cool place. Do not cover your Aiper pool cleaner while charging as this
may cause components to overheat.
8. Please store the machine indoors or in a cool place when not in use.
9. Do not run your Aiper pool cleaner out of the water as it may lead to
overheating.
10. Only certified professionals should disassemble the sealed driving kit
of your Aiper pool cleaner.
11. Do not operate your Aiper pool cleaner and pool filter simultaneously.
12. The oil sealing around the motor contains grease, which may cause a
small amount of water pollution if the motor is damaged. If you believe
there is a leak, stop using the unit immediately.
13. Do not pierce the shell of your Aiper pool cleaner, throw, or damage the
cleaner intentionally.
14. When putting your device into the water, the front of the machine
must face upwards and should never be placed upside down or
directly thrown into the swimming pool.
Important Safety Precautions
3
For your safety and optimal performance of this device, please read
and follow the following suggestions.

FCC Statement
Note: This equipment has been tested and found to comply with the
limits according to Part 15 of the FCC Rules of a Class B digital
device. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications or persons.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, the user is encouraged to try to
correct the interference by one or more of the following measures:
Compliance Declaration
This device complies with Part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interfer-
ence received, including interference that may cause undesired
operation.
Importer. Aiper Intelligent, LLC.
Address: 13851 Ramona Ave, Chino, CA 91710, USA.
US Toll-Free: 1-866-850-0666
AU Toll-Free: [phone]
Reorientate or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Plug the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
Consult the manufacturer or an experienced radio/TV technician
for help.
Please note that changes or modifications of this product are
not expressly approved by the party responsible for compliance
(Aiper), and unauthorized modifications could void the user's
authority to operate the equipment.
4

Handle
ChargerRetrieval Hook
Top Shell
Filter Basket
Chassis
Please read this user manual carefully before operating
the device.
1. Structure
5

2. Specifications & Working Conditions
5. Battery Life: Up to 150 Minutes
6. IP Grade: IPX8 Waterproof
7. Max Water Depth: 10ft (3m)
8. Motor Power: 70W
9. Battery Pack: 7800mAh
10. Battery Pack Voltage: 25.2V
2. Charger Input: 100-240V, 60/50Hz, 5A
3. Charger Output: 29.4V/3A
4. Charging Time: 3-4h
1. Pool Size: 1600 sq.Ft/150m
CAUTION:
Your Aiper pool cleaner is best used in the water conditions detailed
below.
pH Value: 7.0-7.4
Chlorine: Maximum 4 ppm
NaCl: Maximum 5000 ppm
Temperature: 50-95°F (10-35°C)
6

7
3. Using Your Aiper Pool Cleaner
a. The machine is suitable for cleaning floors, walls, and water lines
up to 1600 sq. ft./150m.
4. Installation
a
1600 sq.Ft/150m
a. Lift the tail end of the upper shell to open and gain access to the
interior of the device.
a

8
b. Insert the filter basket into the open slot as indicated in the graphic.
c. After installing the filter basket, press down on the tail of the upper
shell to close the device.
c
b

5. Operating Your Device
a. Turn the dial clockwise to activate each cleaning mode.There are
three cleaning modes to choose from.
The machine will clean the pool floor and wall in turn. After cleaning
the pool floor, wall cleaning will be conducted. When the battery
reaches below 10%, the machine will stop cleaning and remain
parked near the wall of your pool.
The machine will clean the pool floor along the "S"-shaped route (Wave-
Path™Navigation Technology ) without climbing the wall.
Auto Mode: Floor and Wall Cleaning
Floor Cleaning Mode
Floor
9
1
2
3
4
3
1
2 5
100%-50%
49%-10%

10
b. Place your device into your pool. Your device will begin cleaning
within 10 seconds of reaching your pool's floor.
b
Wall Cleaning Mode
1
2
3
4
Wall
The machine will clean the wall along the "N"-shaped route.
No floor cleaning will be carried out under this mode.

11
a. Lift the rear end of the top shell to check the filter basket.
6. Disassembly and Cleaning
a
c.After completing its cleaning cycle, or when the battery is low, your
device may be retrieved from the pool using the provided
hook.The unique design of the spring plate allows for rapid drain-
age of the device when taken out of the pool.
c

12
c. Open the tab of the filter basket.
b. Detach the fasteners to release the basket from the device.
b
c
d. Remove any trash, wash the filter basket with water, and reinsert
the filter basket into the device.
d

13
7. Charging
Fully charge your Aiper pool cleaner before using it to clean your pool.
a. Charging
Please remove the silicone plug before charging.
Switch o the power before charging, otherwise the device cannot
be recharged, and a rapid alarm will be activated.
Wipe dry the charging port before charging your device.
a
b. Please plug the silicone plug back in after charging or before
cleaning your pool.
b

14
a. Lift up the wheel cover marked with an "A.”
8.1 Replacement Instructions for wheel
8. Maintenance & Storage
a
b. Remove the screws fixed to the wheel.
b
c. Remove the shaft and sleeve cover of the wheel for complete
disassembly.
c

15
a. Locate the back side of the rolling brush belt and peel back the
silicone buckle attached to the mounting slot.
b. Once all the silicone buckles are removed, replace the rolling brush
belt with a new one. Align the silicone buckles with the mounting
slots, and press to secure the buckles into each slot.
a
b
8.2 Replacement Instructions for Rolling Brush Belt

16
9. LED Indicator
Battery
State
Charging
Operat-
ing Prop-
erly
Operating
Improperly
The mode
indicator is
o.
If the switch icon indicator
is disabled or a cleaning
mode is enabled, the
mode indicator will turn on,
the ring indicator is o and
the machine is not
charging.
To charge the device, turn
the button to the switch
icon.
A "ding"
sound will
occur
every
time the
button is
turned.
The
indica-
tors color
will relate
to the
device’s
battery
status.
Green: >90%
Blue: 50-89%
Yellow: 10-49%
Red: < 9%
The
Switch
icon
indicator
is always
on; the
ring
indicator
flashes
slowly.
No sound.
Constant
and rapid
alarm
Machine
Condition
Indicator
Condition Description
Sound
When charging, the ring
indicator will flash
dierent colors corre-
sponding to the appro-
priate battery states.
After being fully
charged, the machine
will automatically stop
charging, and the ring
indicator will turn green.
The
corre-
sponding
mode
indicator
and ring
indicator
are
always on.

17
Machine
Condition
Indicator
Condition Description
Sound
Operation
Normal
Abnor-
mal
Turn the button back
counterclockwise to the
original position and your
device will shut down.
All
indica-
tors are
o.
The mode
indicator
and the
ring
indicator
are always
on.
No sound.
The ring
indicator will
be in dierent
colors
correspond-
ing to the
battery
status.
Green: >90%
Blue: 50-89%
Yellow: 10-49%
Red: < 9%
The ring
indicator
is flashing
in red.
Constant
and rapid
alarm.
A "ding"
sound.
Shutdown
Indication
Failure: electrical leak-
age, water blockage, etc.
1. Turn the button
clockwise to select
the cleaning mode:
Auto (Floor+Wall),
Floor Only, or Wall
Only.
2. Turn button back
counterclockwise to
the original position to
power o your device.
The
mode
indicator
is always
on.
A "ding"
sound will
occur every
time the
button is
turned.
Mode
Selection

18
Retrieval Hook
User Manual
Filter Basket
Cleaner
Charger
Name
5
1
2
3
4
NO.
10. Packing List
/
/
/
/
Aiper Seagull Pro
Model
1
1
1
1
1
QTY(pc)
1. This product comes with a 24-month warranty that covers your
item’s battery and motor from the date of purchase.
2. This warranty is voided if the product has been altered, misused, or
has been repaired by unauthorized persons.
3. This warranty extends only to manufacturing defects and does not
cover damage resulting from the mishandling of the product by
the owner.
4. The order number or record of purchase must be presented at the
request of any repair claim during the warranty period.
This product has passed quality control and safety test conducted
by our technicians.
11. Warranty
CONFORMS TO UL STD. 1081
CERTIFIED TO CSA STD.
C22.2 NO. 108
5026076

www.aiper.com