Aiphone AX-DM User manual

WIRING DIAGRAM:
OPERATION:
Door stations calling Master(s): Press call button on door station. Tone and LED light will be
activated at the master station(s). Communication at master is Push-to-talk or VOX hands free.
Communication at door station is always hands free reply. Press OFF at master to conclude.
Master calling Door Station: Press door station’s selector button on master. Press TALK to
initiate, then speak via either Push-to-talk or VOX hands free. Press OFF to conclude.
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
[phone]
FAX [phone]
Toll Free Technical Support:
1-800-692-0200
FAX: [phone]
E-mail [e-mail]
Pg. 2
AX-door stns Instr.
0307JD
SPECIFICATIONS:
NOTE:
Only information pertaining to the AX-DM, IF-DA, IE-DC, IE-JA, IE-SS and IE-SSR for use with the AX
system is included here. For complete installation, wiring, programming and operational information, please
refer to the AX Series Installation Manual, located on the CD that comes with the CEU, or on our web site.
Power source: Power provided by AX CEU (AX-084C, AX-248C)
Wiring Distance: 980' using CAT-5e
Dimensions: AX-DM: 6-5/16" H x 1-11/16” W x 7/8" D
IF-DA: 5-1/8" H x 3-7/8" W x 1-1/8" D
IE-DC: 5-5/16" H x 4" W x 1-11/16" D
IE-JA: 4-½” H x 4-9/16" W x 2" D
IE-SS/SSR: 4-11/16" H x 4-11/16" W x 2" D
* AX series door stations include: AX-DM, IF-DA, IE-DC, IE-JA, IE-SS, IE-SSR
NOTE:
1 PS-2420UL per system
when all subs are audio-only.
If any video door stations are
on the system, 2 PS-2420UL
power supplies are required.
CAT-5e
CAT-5e
Grn/Grn-Wht pair of CAT5e = 1
Brn/Brn-Wht pair of CAT5e = 2
(*Splice hardware not provided by Aiphone.)
AX Sub
1
2
Splice
Point
Homerun each sub to
AX-084C, AX-248C, or
AX-320C CEU.
1
2
AX-Series Audio
Only Station*
TIA/EIA 568B Standard:
Connect 3/6 pair (green) to “1”
Connect 7/8 pair (brown) to “2”
CAT5e
Illustration of converting from
2-conductor to CAT-5e cable.
Use your preferred method for splicing cables
to interface a standard 2-conductor cable run
from the door station to the CAT-5 cable and
RJ45 jack, required for connection to the CEU.
2-conductor
or CAT-5e