Aiphone PP-MK User manual

DESCRIPTION:
The PP-MK is a modular video door station, used
with the MK or MY Video Entry Systems for audio
and video door answering. With its modular design,
mounting can be either horizontal or vertical.
The unit consists of separate audio and video
modules. The video module has a built-in CCD
camera, providing a wide angle view of the entry
area, 95 degrees horizontally and 70 degrees
vertically. The camera angle is adjustable up to 16
degrees above level (at the time of installation).
ThePP-MKcanbeusedwithanyMKorMYseriesvideo
entry system. Choose the system that best suits the
needs of the inside locations. When using the MY
series, the PanTilt control pad will be non-functional.
The PP-MK flush mounts into a 4-gang box, along
with the PPW-2P mounting frame.
COMPATIBLE SYSTEMS:
• MK-1MD/A Monitor/handset room station
• MY-1CDPanTiltMonitor/handsetstation
• MY-2CD PanTilt Plus System
• MY Video with IE, TD-H, or LEF Audio
FEATURES:
• Vertical or horizontal mounting
• Wide angle camera with vertical
adjustment at the time of installation
• Compatible with MK or MY series
• CCD camera with LED illuminators for low
light conditions
• Hands free communication
MOUNTING &
INSTALLATION:
(Horizontal mounting)
SPECIFICATIONS
PP-MK
Modular Video Door Station
Callbutton
CCDcamera
Speaker
Microphone
Vertical
mounting
PP-MK with PPW-2P Mounting Frame
Horizontal mounting

SPECIFICATIONS:
Power source: Supplied by Monitor
Camera unit: CCD camera with infrared LEDs
Image viewing area: 95 degr. horizontally, 70 degr. vertically.
Wiring: 2 conductors from door station to
MK-1MD/A or MY monitor.
Aiphone wire #841802 (18AWG)
Wiring Distance: 330’ w/18AWG
980’ w/ MYW-BA adptr. and #851602 wire
Dimensions PP-MK Alone
(H x W x D): 3-3/8” x 7-1/4” x 1-9/16”
With PPW-2P Frame
5-1/8” x 8-3/4” x 9/16”
ARCHITECTS/ENGINEERS’ SPECIFICATIONS:
The video door station shall be Aiphone model PP-MK ,
with individual audio and video modules. The video
module shall be equipped with a CCD camera and
infrared LEDs for low light conditions. The camera
shall be wide angle, with a horizontal and vertical
viewing range of 95 x 70 degrees. The vertical angle
of the camera shall be manually adjusted upwards
by up to 16 degrees above level at the time of
installation. The audio module shall contain a call
button and a speaker/microphone for two-way
communication.
Pressing the call button shall activate a chime and
turn on the video monitor at the inside station(s).
(MK or MY series). Each inside station shall have
door release capability with the button identified with
a “key” symbol.
Wiring from the PP-MK shall be a 2 conductor, non-
twisted, non-shielded cable homerun to the first
monitor (or video adaptor). If an additional monitor
or handset is included, wire shall be daisy-chained
from the first monitor/handset station to the next
inside station.
The unit shall be flush mounted into a 4-gang
mounting ring or box, along with the PPW-2P
mounting frame.
Thedimensions of thePP-MKvideodoor station shall
not exceed 3-3/8” high by 7-1/4” wide by 1-9/16”
deep.DimensionswiththePPW-2Pshallnotexceed
5-1/8” high by 8-3/4” wide by 9/16” deep.
Manufacturer must have earned ISO 9001
certification for quality standards.
SYSTEM LAYOUT EXAMPLE:
Aiphone Communication Systems • 1700 130th Ave. NE • Bellevue, WA 98005
[phone] • FAX: [phone] • [phone] • http://www.aiphone.com
Intercom Solutions For
Communications and Security PP-MK-SS 91328 0299 Printedin USA
2
PP-MK
w/ PPW-2P MK-1MD/A
PS-18YC/A