QR Code
Place Holder
GT-2C
PIZZA
COMMUNICATION WITH ROOM...
This operation guide describes the basic
functions of your GT Series Tenant Station
This tenant station has a dedicated power
supply and will always remain on. Contact the
building manager if the tenant station in this
residence is not working. If power is lost for
over 30 minutes, the blinking STATUS light
indicates the date / time needs to be reset.
Power Supply
Push REC / PLAY
to view recorded
images. The
STATUS light blinks to
indicate new recordings.
Push MONITOR
to see and hear
activity in the
hallway (personal tenant
door station required) or
at the main entrance
(if enabled).
Push CALL to
talk between
rooms or to call
all stations within the
apartment (two or more
tenant stations required).
Push MENU to
view settings.
When a symbol
appears on screen, push
the operation button
beneath that symbol to
activate the function
(see chart below).
Operation Buttons
Push the Door Release
Button to unlock the
entrance during a call.
Door Release Button
Push the OPTION button
to activate an external
device, such as a garage
opener (if included).
OPTION Button
Push the GUARD button to
call all guard and/or concierge
stations connected to the
system (if included). While in
conversation, push the GUARD
button to view the visitor on a
CCTV camera (if enabled).
GUARD Button
Push the ADJUST Button
to compensate for low or
bright backlight conditions
when viewing video from
a door station.
ADJUST Button
Push the ZOOM / WIDE
button to change the
screen view or to make
a menu selection.
ZOOM/WIDE Button
Use the
dial to
adjust the
LCD screen
brightness
levels (0~10).
LCD Screen
Brightness
Control
Use the dial
to adjust the
communication
volume (0~10).
Volume
Control
Use the dial to
adjust the chime
volume (0~10). The
TONE OFF light
blinks slowly when
the chime is muted.
Chime Volume
Control
Push , , , or to
change the camera view
(zoom-view only). When
making menu selections,
push or to change
the cursor position.
Camera / Cursor
Control Button
Push the TALK
button to answer an
incoming call. Once
answered, conversation
becomes hands-free.
TALK
Button
Push the OFF
button to “hang up”
the conversation
(this does not turn
off the device).
OFF Button
Speaker
LCD
Screen
Mic
GT-2C Tenant Station
Symbol Function
Manually records
Return to previous screen
Play recordings
Display previous recording
Display next recording
Open save / erase options
Save a recording
Erase a recording
Fast-forward recordings
Pause recordings
Fast-forward frame by frame
Reverse frame by frame
Hide the display symbols
Monitor entrance (if enabled)
Communicate room to room
Select function / setting GT-2C Consumer Operation Guide |1 of 1
For a complete operation manual (3.71 MB), scan QR code to download
it from the manufacturer’s website: www.aiphone.com/gt-2c-op-man
January 2015
