Air Lift AirCell 52202 User manual

For maximum effectiveness and safety,
pleasereadtheseinstructionscompletely
before proceeding with installation.
Failure to read these instructions can result in an
incorrect installation.

INSTALLATION GUIDE
Kit 52202
GM 2500-3500
Rear application

TOOLS LIST
Item Part # Description................................Qty
  ..................................................
   ..................................
   ...............................
    ................................
   ..........................................
   .........................................
   ...............................
   ..................
   ................................
    ....................
HARDWARE LIST
Important Safety Notice




and do not exceed the maximum load
listed for your vehicle.
Gross Vehicle Weight Rating: The
maximum allowable weight of the fully


with other weight limits, as well as tire,



Payload: The combined, maximum
allowable weight of cargo and



Installation Diagram
g. 2

NOTE: Use
the slot in the
spring cup to
center AirCell
over the axle
strike pad.
 

pad area
Description.............................................. Qty
................................................
 ......................................................
................................. 
Metric and standard wrenches .............................
 .................................................................
Front
A
E
GF
H
I
D
G
D
B or C
OPTIONAL NOTE:
To increase the
loaded vehicle height,
add the optional
cup spacer

g. 1
NOTE: Apply

the engagement

installation
AirCell

Installing the AirCell System
ASSEMBLING AND ATTACHING THE SYSTEM

of the vehicle until the suspension is fully extended.
 
 

 

The brackets are right and left hand specic and are marked with an L or and R for left and right hand
installation. The slotted mounting hole goes to the rear of the vehicle. Torque the mounting bolts to 31 ft/
lbs.
 

Applying grease or soap around the engagement ange of the spring (A) will help in aiding the spring (A)
to “snap” into the spring cup (E).
 

You can adjust the loaded height of the vehicle by adding the optional cup spacer between the cup and
the bracket. It will be necessary to use the longer hardware provided to install the cup spacer (see g 1
note).
NOTE
OPTIONAL
NOTE
AirCell
AIR LIFT SYSTEMS SUSPENSION SYSTEMS