Aira AAP-301 User manual

TM
Air Purifier
Owner’s Manual
(AAP-301)
Indoor Air Purification Systems
Crescent Technocrats
Customer Care(Toll Free): 1800-102-3715 Email: [e-mail]

2
Dear Customer,
We thank you for your purchase of this product and we welcome you to AIRA family.
We request you to please read this manual carefully, and accept our advice and directions,
during the installation, use and maintenance of this machine, to ensure the highest level of
performance.
All our products are developed and produced by experienced engineers, who aspire to
achieve maximum customer satisfaction, utility value and reliability of the products.
We hope you enjoy our product and we will be happy to receive your valuable
comments/feedbacks that you may have. This will help us to improve our products quality,
performance and the technical support that we provide to every customer.
If you have any questions while using this product, please read the manual carefully.
Note: The pictures in the manual are just for your reference, details should be subject to the
machine.

3
CONTENTS
Sr. No.
Description
Page No.
1.
Product Details
4
2.
Air Purifier Features
5
3.
Part Details
6
4.
Installation Instructions
7
5.
Maintenance of Filters
8
6.
Functions
8
7.
Precautions
9
8.
Hazardous
9
9.
Warning
10
10.
Attention
11
11.
Filter Replacement
12
12.
Intelligent odor sensing system memory reset instructions
12
13.
Troubleshooting
13
14.
Warranty Terms and Conditions
14
15.
General
15
16.
Post Warranty
15

4
Product Details
Product Model No.
AAP-301
Rated Voltage
220-240 V
Rated Frequency
50Hz
Rated Power
43W
Purification Method
1. Pre-Filter
2. High Efficiency HEPA
3. Cellular activated carbon
4. Cold catalyst
5. Ultraviolet sterilizer
6. Anion Generator: 2x107pcs/cm3negative ion
Wind Speed
High speed, Medium Speed, Low speed
CADR
190m3/h(for PM2.5)
Dimension
L335×W180×H505mm
Net weight
5Kg
Application Area
320 sqft

5
Air Purifier Features
Pre-Filter
Adopting non –woven cotton material, stop big particulates and hairs.
High efficiency HEPA Filter
The precision of HEPA filter is 0.01 micron, and it is able to eliminate particles which are
larger than 0.01 micron with the filtration efficiency of 99% or more. Dust, bacteria, fungi,
viruses, allergens and other small and tiny particles are not able to get through the HEPA filter.
It can also remove smoke smell.
Cellular-Activated Carbon Filter
The cellular-activated carbon carries highly efficient additives. It has good absorption and
dust collection characteristics with more than 98% absorption rate of harmful gases like
Benzene, toluene, xylene, formaldehyde, ammonia etc.
Cold Catalyst Filter
1. The cold catalyst will provide a catalyst effect in normal living environment without
any external assistance like UV light, sunlight, high temperature or pressure.
2. It catalyzes formaldehyde, ammonia, benzene, TVOC, hydrogen sulfide and other
harmful gases to react with oxygen, and then decompose them into water and carbon
dioxide.
3. The cold catalyst itself does not change during the decomposition action, thus the
cold catalyst is long lasting and can be valid up to 5 years.
4. The catalyst material is regularly used in non-toxic, non-corrosive and
non-inflammable materials, thus it is safe to use. It works under normal condition and
produces only water and carbon dioxide.
5. The cold catalyst can be used to deal with formaldehyde, ammonia, benzene, TVOC,
hydrogen sulfide and other harmful gases released by plywood, furniture, wallpapers,
carpets, curtains and bedspreads.
Ultraviolet Sterilize Light
A variety of bacteria and viruses can be killed by ultraviolet light. The UV germicidal lamp is
used to purify the air and it is able to eliminate odor caused by smoke and mold. Besides, it
also produces certain amount of negative ions, which freshens the air inside the room.
Anion Release
The Ionizer releases large amount of anions and makes the oxygen negatively-charged, thus
gathering the positively-charged particles like floating dust, bacteria, viruses and smoke. The
particles become denser and thus, sink to the ground. Smaller the particles size, higher the
capture rate.
Intelligent Odor Sensor System
This unit comes with an intelligent odor sensor system. It can automatically adjust the fan
speed according to the air quality display

6
Part Details
(1)
Control panel
(6)
Silent
(11)
Handle
(2)
Quality Display Window
(7)
Timer
(12)
Anion Air Outlet
(3)
On/Off
(8)
Sterilize
(13)
Rear Case
(4)
Anion
(9)
Front plate
(14)
Remote Controller
(5)
Speed
(10)
Middle case
(15)
Power cord

7
Installation Instructions
1. Pull the front panel and extract upward.
2. Turn the buckles and take out both pieces of filter.
3. Remove all packaging bags.
4. Put Filter 1 (Activated Carbon Filters) back into the product.
5. Put Filter 2 (HEPA Filter) back into the product.
Note: Please ensure that the tab (ribbon) side is facing you.
6. Make sure that the filters are installed in position. Turn the buckles to fix the
Filters.
7. To install the front panel, put the bottom into the host buckle and close the
Front panel. The front panel will be held by built-in magnets.

8
Maintenance of Filters
1. In order to extend the filters’ life, filters should be exposed to the sunlight
periodically in order to let the harmful gas, odor escape and to kill bacteria.
2. Do not place the filter close to high temperature to avoid distortion or fire.
Functions
1. The product is equipped with remote control.
2. Plug in the power, the digital screen display”- -“, and the machine is in
stand-by mode.
3. When pressing the power button, the design will flash in the digital screen.
4. When pressing the timer button, the machine is turned on and the
intelligent odor sensor control is started too. The machine will adjust the speed
automatically according to the air quality. The timer starts from 1-12 hours, the
power will be turned off when time expires.
5. The speed control button circulates from low, medium and high. The speed
is shown on the digital screen. The speed control button also control fan
starting and off.

9
6. When pressing the sleep button, the machine will be at low speed and the
intelligent odor sensor control is turned off. The speed and sleep buttons are
mutually-controlled. When one is turned on, the other is turned off.
7. Press the Anion button to turn on the anion generator and the Anion Icon
will be shown on the display screen. The intelligent odor sensor control is
turned on automatically at the same time.
8. Press the Sterilize button to turn on the UV germicidal light and the
Sterilize icon will be shown on the display screen. The intelligent odor sensor
control is turned on automatically at the same time.
Precautions
Before using the product, please read this manual thoroughly and retain it for future
reference.
Hazardous
To avoid electric shock or fire, ensure that the product is dry at all times and keep the product
away from water or any other liquid.

10
Warning
1. Make sure the local power supply voltage is the same as indicated on the nameplate on the
back of machine.
2. If the power cord is damaged, please discontinue the use of the product and contact the
authorized agent to fix it.
3. Do not block the air inlet or outlet with any objects.
4. For safety precaution, please do not allow children or people who have insufficient
knowledge to handle the equipment unsupervised.

11
Attention
1. This product is not supposed to be used as daily ventilator. Dust cleaner or cooker hood.
2. Ensure that the power socket is in good condition. Otherwise the plug may become
overheat and cause fire.
3. This product must be placed on a dry, stable and flat surface
4. There should be a gap of at least 20cm at both sides and back of the product, while 30cm
from the top surface.
5. Do not sit and /or place anything on the product.
6. Do not place the product directly below the air conditioner to prevent condensation in the
product.
7. Do not knock the product with hard objects (especially the air inlet and the front plate)
8. The odor sensor area should be cleaned frequently to prevent clogging.
9. Do not use this product while using insect repellent sprays inside the room or in a place
filled with flammable gas.
10. Do not use this product near gas appliances, heating devices or near stove.
11. Please unplug the socket after use and before cleaning.
12. Do not use this product in a fluctuated temperature room as this may cause condensation
inside the product.
13. This product is intended for household use under normal operating conditions.
14. Do not use this product in a humid or high-temperature environment (e.g. bathroom,
toilet or kitchen).
15. Do not allow children to have access to the remote control.

12
Filters Replacement
The machine can remind you to replace the filters, after working for 1899 hours, when
pressing the power button, the quality indicator light will shine to remind you of replacing the
filters. After replacing, press the power button until the fan runs, after 10 seconds, the total
working time will be cleared into zero. Then turn on it again, it can work normally.
Intelligent odor sensing system memory reset
instructions.
If the air quality indicator displays red color and the machine power is cut off suddenly, you
might have to reset the intelligent memory. Otherwise, the red color display will remain.
1. Unplug the machine and wait for 15-20seconds.Plug again and start the machine and
press negative ion, timer or Sterilize.
2. Keeps the machine working for 15 seconds. Repeat the first step above twice.
3. Please perform the steps above extra in a clean environment without air pollution.
Otherwise the air quality display lights will be disrupted.

13
Troubleshooting
The filters should be cleaned or replaced when filled with dust.
Problem
Solution
No air comes out from the outlet
Please check whether the product is
turned on and connected to the power
supply
Outlet airflow is significantly weakened
than before
The filters are dirty and they need to be
cleaned or replaced. You can slightly
shake the filters to remove the dust and
other objects on it.
The filters packaging bag is not
removed .Please remove the filter
packaging bag.
The air quality is not significantly
improved after long run of the machine
Check the filter layers installation
sequence
Filters are worn out, you need to replace
all the filters.
The filters should be exposed to the
sunlight periodically
When should I replace the filters
Activated Carbon Filter: the surface is
dirty and fades in color. The tiny hole of
the cold catalyst is blocked by dust or the
color of the active carbon has obviously
changed. Life time: 8-12 months.
HEPA filter: The white HEPA changes to
yellow, black, or mildew. Life time: 6
months.(Maximum)
Remarks: The filter life span is
determined by the environment air
quality and duration used.
Quality indicator light shine
Remind to replace the filters, operate
according to the instruction

14
Warranty Terms and Conditions
AIRA Air Purifiers are warranted against defects arising from faulty design, workmanship and
materials 12 months from the date of installation or 15 months from the date of sale,
whichever is earlier, subject to the following conditions:
1. The customer will notify the Company, in writing, promptly of any defects noticed
and give the Company or its authorized agent adequate opportunity to inspect, test
or remedy for which the Customer will deposit the good, if so required by the
Company, with the Company’s Office/Service Centre along the original invoice.
2. The Inspection and Test Report of the Company’s Office/Service Centre will be final
and binding under warranty for determining defects, repairs/alterations required or
carried out or certifying work of the good thereafter.
3. The company or its authorized agent will be entitled to retain any defective part
replaced under the Warranty.
4. Notwithstanding anything to the contrary contained or implied by this warranty
a. The company’s liability under this warranty shall be limited to the first sale of
the goods by the company to the customer and will not apply or extend to
any secondary sale of goods by the customer.
b. The company’s liability under this warranty shall be limited only to the
defects in the goods which occur under the conditions of normal operation of
the goods and their proper and prescribed use. The warranty does not cover
or extend to defects which are determined by the Company or its authorized
agents occurring or resulting from or attributable to negligence, abuse,
misuse, faulty care, operation or maintenance or repairs, alterations to the
goods or any part thereof by others or the use of the goods on electrical
supply for which they are not designed, or damage caused by lightning or
other electrical disturbances or interruptions.
c. The company’s liability under this warranty shall remain valid only if the
goods are duly installed by the company or it’s authorized Agency at the
location specified in the invoice and such installation is undertaken by the
company or its authorized agent or franchisee.
d. Consumable Items like filters that are subject to normal wear and tear are not
covered by this warranty.
e. The customer will have no claim against the company, its employees and its
authorized agents or franchisees under or pursuant to this Warranty in
respect of death or injury to the Customer or any other person or loss or
damage to any property caused by or due to equipment failure, breakdown
or accident, fire or operation or utilization of the goods otherwise than in
accordance with the User guide or by due to any other cause or
circumstances beyond the control of the Company.
f. The company’s liability, under the warranty, shall in no event and under no
circumstances exceed the price paid by the customer to the Company for the
goods stated in the Invoice.

15
General
For the purpose of this Warranty, the following expressions shall have the following meanings
respectively:
1. The “Goods” shall mean the goods described in the Order Form.
2. The “Customer” shall mean the original purchaser of the Goods from the Company.
3. The “Company” shall mean “ Crescent Technocrats”
4. “General Terms and Conditions” shall mean the terms and the conditions agreed upon
by the Customer and the Company printed on the Order Form
5. “Invoice” shall mean the invoice issued by the Company to the Customer describing
the goods and indicating, inter alia, the total purchase price thereof and name of the
Customer
6. “User Guide” shall mean the instructions for installation, use and maintenance, T&C
contained in the leaflet supplied by the Company.
Post-Warranty
1. After the warranty period, the customer has the option of calling the Company’s
Service Centre and having the goods serviced on an actual basis i.e., by paying the
Labor cost and Spares needed to attend to that Service/Complaint Call at the
prevailing Company rates. Such Service will be rendered by the company in
towns/places where the Company has its Service Centers.
2. The Company will provide free servicing of the goods brought to its Service Centre by
the Customer, provided that all expenses of the transporting the goods to and from
the Service Centre shall be borne by the Customer Directly. Also, if during such
servicing it is necessary for the company to replace or repair defective components or
parts, the customer shall be required to pay for the same as per the company’s
prevailing price list.
3. Crescent Technocrats reserve the right to offer the servicing and the spare parts and
ensure the availability of spare only up to 3 years from the date of invoice.

16
Imported, Marketed and Serviced by:
Crescent Technocrats
C-84A, Sector-8, NOIDA- 201301
Phone: [phone]
Email: [e-mail] Website: www.aira-india.com